Horizontal Laminar Flow Cabinet

Laminar Flow Cabinet Features:

1. Ergonomic control panel location, centered and angled down for an easy reach & viewing.
2. Brushed stainless steel work surface is for easy cleaning.
3. The non-direct light source design can effectively relieve the operator's visual fatigue under the condition of ensuring the illumination.
4. Intuitive and easy-to-use microprocessor controller with LCD display, graphical and digital display of the operating status of each function, such as filter life, UV life etc.

Reliability:

1. Front sliding sash interlock with fan and UV lamp.
2. UV sterilization with UV lamp timing function.
3. Front sash and side windows are made of UV-resistant tempered glass.
4. The host and sockets have independent capacitors to prevent current overload.
5. Memory function in case of power-failure.

Convenience:

1. HEPA filter and UV life indicators facilitate a timely replacement plan.
2. Two side glass windows installed for easy experiment observation.
3. Easy-to-change pre-filter installed could extend the HEPA filter’s lifetime.
4. Equipped with temperature sensor to show the real temperature during operation.
5. Waterproof socket provide convenience for small instruments to be used in the operating area.

Applications of Laminar Flow Cabinet:

Laminar Flow Cabinet Specifications:

• Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
• Max. speed: 14,100 x g (14,500 rpm)
• Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
• Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
• Rotor can be autoclaved at 121°C for 20 minutes
• Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
• Eliminate costly repairs with the low maintenance drive
• Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Click Here To Download Catalogue

• Speed: 11,800rpm with 24- place rotor
• RCF: 14,000g with 24-place rotor
• Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
• Brake: Automatic
• Noise: 62dB running with 24-place rotor
• Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
• Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
• Weight: 5.1Kg net (without rotor)
• Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
• Construction: Aluminium casing with a steel lid
• Finish: Body cream white baked enamel, with matt black baked enamel lid

Click Here To Download Catalogue

• Total Volume: 60mL.
• Specimen Container, Leak-proof, Ideal for Pathology/Histology/Cytology reagent pre-filling sample preparation.
• Made of premium PP material, it is durable for usage.
• Some measurements can be used to not only use urine samples, it can also be used for other liquids.

• Parameters: Na+,K+,Cl-, iCa++ / Li
• It works on ISE principle
• Sample Type: Whole blood, Serum, Plasma, Urine
• Low reagent consumption
• Sample requirement is only 90ul
• 60 samples per hour
• Automatic two point calibration after 4hrs and one point calibration with each sample analysis
• Air bubble detection
• Track reagents consumption and provides alerts
• For low reagent volume
• Precision testing facility to get CV and SD
• Trilevel Quality Control with LJ plots of last 30days
• Low aspiration volume
• Fast sample processing
• Accurate and Precise results

Click Here To Download Catalogue

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.