SV-Multisensor2_01

Health Education / Medical Equipment

OXYGEN & CARBON DIOXIDE MONITOR

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dual state-of-the-art oxygen and carbon dioxide sensors
Two analogue outputs, one for each gas detected
Maximum power consumption less than 5 watts
Designed to operate safely in a vacuum for four hours

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-12

Brands:: Analox

Description
Reviews (0)

Description

Description

The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space.

Flexibility

The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.

Technical Specification

SV-Multigas-2

Operating temperature range	32 to 104 °F / 0 to 40 °C
Storage temperature range	−4 to 140 °F / −20 to 60 °C
Operating pressure range	8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance	normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply	18 to 36 V DC, 100 mV ripple maximum
Power consumption	5 W maximum
2 analogue outputs are provided, one for each gas	Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other

O2 SENSOR

Range	0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	± 0.116 psi pO2 / ± 8 mbar

CO2 SENSOR

Range	0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)

Click here to download Data Sheet

Reviews

There are no reviews yet.

Be the first to review “OXYGEN & CARBON DIOXIDE MONITOR”

Quick Comparison

Settings OXYGEN & CARBON DIOXIDE MONITOR remove LIGHTWEIGHT PERSONAL CO2 ALARM remove DISSUB ANALYSER remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove Atmosphere Protection Module remove PORTABLE OXYGEN MONITOR remove

Name OXYGEN & CARBON DIOXIDE MONITOR remove LIGHTWEIGHT PERSONAL CO2 ALARM remove DISSUB ANALYSER remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove Atmosphere Protection Module remove PORTABLE OXYGEN MONITOR remove

Image

SKU SF1033560130141-12 SF1033560130141-10 SF1033560130141-17 SF1033560130141-13 SF1033560130141-16 SF1033560130141-18

Rating

Price

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dual state-of-the-art oxygen and carbon dioxide sensors
Two analogue outputs, one for each gas detected
Maximum power consumption less than 5 watts
Designed to operate safely in a vacuum for four hours

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Extremely lightweight: max weight 70g
Rechargeable battery
Minimum of 48 hours operation on one charge
User friendly: Single button operation
Most common alarm set points pre-configured
Fresh air calibration
Alarm indicators: Audible, visible, and vibration
IP54
Maximum relative humidity – 95% RH (Non-condensing) Temperature – 0 to 40°C (32 to 104°F)

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Proven hyperbaric sensing capability
You have the ability to change sensors and maintain the unit in the dockyard, reducing costs and downtime
Backlit display for low/no light situations
Portable and lightweight making it easy to use around the submarine
Externally accessible batteries making for more convenient and safer changing
MODBUS RTU over RS485 digital communications, allowing for easy incorporation into your existing platform management system, including JANUS enabled underwater communication networks

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key features

It is the only portable monitor to be pressure corrected ensuring no false readings are given
The Sub Aspida is compact in size (127 x 44 x 90mm LxDxW)
The oxygen (O2) sensor can be calibrated on air, reducing costly gas requirements and making you self sufficient in the maintenance of the sensor
The carbon dioxide (CO2) sensor only needs calibrating every 12 months
OLED (Organic Light Emitting Diode) display
Pressure compensated CO2 & O2 sensors
Rechargeable battery-operated (NiMH)
Datalogging
Man-down alarm
Can offer continuous monitoring or spot checking
Audio, visual and vibration alarms
TWA (Time Weighted Average) Alarm
User maintainable
Can be worn on the belt or clipped to a panel
Pressure range of 700-1200mbara
Maintenance reminders as standard

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Flexible to meet your specific needs and ensures you meet current legislation
Measures up to 2 gasses with a choice of; O2 (oxygen), CO2 (carbon dioxide) and R134a (refrigerants). The APM will soon be able to measure VOCs (volatile organic compounds)
Uses MODBUS RTU communications protocol
Temperature compensated sensors with PressureSync technology
Fitted with 2 relays
Compatible with the Analox Distributed Atmosphere Monitoring solution (DAMS)

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Fitted with a temperature compensated sensor which offers an expected 3 year life
Water and drop resistance, perfect for when using onboard diving trips
Compact and robust with minimal maintenance costs
Fast and easily transportable

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Description

The SV-Multigas-2 is a dual oxygen (O2) and carbon dioxide (CO2) monitor designed for vehicles operating in the upper atmosphere. Housed in a robust, compact enclosure, the unit is ideal for use in airborne delivery systems, satellites and aircraft cabins. Since 2014 the SV-Multigas-2 has been successfully used in rockets travelling to outer space. Flexibility The SV-Multigas-2 incorporates user maintainable analogue sensors that provide a 1 to 5 V output. This modular approach to gas monitoring ensures that our customers have the flexibility to integrate the unit into their own system. It can be either installed directly in the gas path or used for general air monitoring.

Technical Specification

SV-Multigas-2

Operating temperature range	32 to 104 °F / 0 to 40 °C
Storage temperature range	−4 to 140 °F / −20 to 60 °C
Operating pressure range	8.7 to 17.4 psia / 600 mbar to 1200 mbara
Vacuum tolerance	normal operation of the SV-Multigas-2 will not be affected by 4 hour exposure to vacuum
Electrical supply	18 to 36 V DC, 100 mV ripple maximum
Power consumption	5 W maximum
2 analogue outputs are provided, one for each gas	Zero output: 1.0 V, full-scale output: 5.0 V, warm-up/fault output: 0.25 V Outputs are isolated from the incoming power supply and from each other

O2 SENSOR

Range	0 to 5.80 psi pO2 / 0 to 400 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	± 0.116 psi pO2 / ± 8 mbar

CO2 SENSOR

Range	0 to 0.14 psi pCO2 / 0 to 10 mbar
Repeatability @ 14.5 psia, 70 °F / 1000 mbara, 21 °C	±(0.0014 psi pCO2 + 1.1% of reading) / ±(0.1 mbar + 1.1% of reading)

Click here to download Data Sheet

CO2 MONITORING WITH THE CO2 BUDDY

Carbon Dioxide Sensor

The CO2BUDDY uses state-of-the-art Non-Dispersive Infrared (NDIR) technology to detect CO2. The NDIR system monitors the air in the surrounding environment for the specific CO2 elements. No additional “control” or “calibration” gasses are needed. The simple-to-operate unit protects users and those nearby by alerting them to CO2 leaks or buildup with multiple alarms – a high visibility LED display, a loud and powerful audible alert and a powerful vibration motor. The vibration setting is ideal for workers in noisy environments where the audible alarms could be drowned out by background noise. Users can customize which alarm setting they prefer. The CO2BUDDY has multiple set-points to comply with the most common safety regulations and jurisdictional requirements, which can be different by country, region, state and municipality. The unit comes with pre-configured alarm set points that meet safety standards across the globe including Europe’s EH40 legislation, OSHA and NIOSH TWA requirements in the United States.

Technical Specification

CO2 Buddy


Display	LCD
Power	Minimum of 48 hours of operation with low battery warning
Charging	2 hours at 5V, 300mA
Max dimensions	75mm x 63mm x 34mm 2.9" x 2.4" x 1.3"
Mounting	Pocket, belt or lanyard
Approvals	CE, FCC
Alarm indicators	Audible, red strobe, vibration
IP rating	IP54
Maximum relative humidity	95% RH (Non-condensing)
Temperature	0 to 40oC (32 to 104oF)
Product Warranty	2 Years

Characteristics

Calibrate on site

Unlike most portable CO2 monitors which require you to send the device back to the manufacturer for calibration, the CO2BUDDY allows you to calibrate on site, all you need is fresh air! Saving you time and money, the CO2BUDDY is perfect for those who like to get the job done.

Built for user convenience

Very simple to operate, the user can select the pre-configured alarm set points which all feature a TWA (Time Weighted Average) alarm, continuously monitoring the environment over an 8-hour period. The environmentally-friendly CO2BUDDY features a rechargeable battery that can easily last a minimum of 48 hours on a single charge. The unit is designed to be charged overnight or during off-hours, virtually eliminating the need for service returns or battery replacements.

Reliable

This advanced monitor is also extremely durable, offering long-lasting sensor life and reliable personal monitoring for virtually anyone who may come into contact with CO2 during the course of their day. The CO2BUDDY has been providing an added level of safety and security worldwide since its introduction in 2019. This impressive REVIEW OF CO2BUDDY BY SeetheAir.org provides a fresh perspective of the product’s benefits and specific applications.

CO2 exposure

While brief exposure to CO2 is common throughout the workday, it’s the potential build-up of the gas from different locations that can often put employees at risk. The CO2BUDDY monitors the average CO2 level over an 8 hour period and will alarm when the overall exposure becomes harmful. Lightweight, portable and highly effective, the CO2BUDDY is one of the smallest and lightest personal CO2 monitors available today. Designed with user comfort and convenience in mind, the unit can be clipped to a shirt pocket, belt or lanyard with little interference with the monitoring process.

Tried, tested and Trusted

The CO2BUDDY is currently in use worldwide in such diverse industries as food and beverage, hospitality, research laboratories, medical facilities with cryogenic process monitoring, food processing and storage facilities and stadiums. Gas delivery drivers who service many of these industries on a daily basis are key target users of the CO2BUDDY. From initial power up, you must allow a two-hour charge and perform a quick fresh air calibration. Your CO2BUDDY is then ready to protect you!

Download Quick Start Guide

Click here to download Data Sheet

Description

The Sub Mk3P Continuous Gas Monitor from Analox is designed specifically to monitor life support gasses aboard a submarine in the event of a distressed submarine (DISSUB) situation.

Portable and lightweight, the Sub Mk3P monitor provides crucial information to the senior survivor about the state of the atmosphere inside the submarine during a time of crisis. This information helps that officer make one of the most challenging decisions any submariner ever has to make – attempt to escape the submarine or wait for rescue teams.

Technical Specification

Temperature & Humidity Sensor

Main Unit


Battery power	4 x ‘D’ alkaline cells (Hyperbaric)
External power	24V dc (9-36V dc), <0.5A
Backup batteries	2 x LR43 alkaline manganese cells
Displays	6 x 4 character LCD, with symbols and LED backlights
Operating temperature	-5 to 50°C
Storage temperature	-5 to 50°C
Operating pressure	0.7 to 10barA
Operating humidity	0 to 100%RH (Non-condensing)
Standards/ compliance	NATO STANAG 1476:2014 ANEP/MNEP 85 & 86 (2014) DEF STAN 59-411:2014 (EMC) IACs E10:2014 (MarED) type tested IP65 CE marked (RoHS)"
Dimensions (W, H, D)	240mm x 198mm x 127mm
Weight	2kg with batteries installed

O2 Sensor


Range	0 to 2000mbar pO2
Accuracy	±10mbar (0 to 300mbar pO2) ±50mbar (300 to 2000mbar pO2)
Response time (t90)	20s
Detection mode	Electro-chemical
Shelf life (in sealed packaging)	6 months
Expected life (in air)	12 months

CO2 Sensor


Range	0 to 100mbar pCO2
Accuracy	±10mbar
Response time (t90)	60s
Detection mode	Infrared
Expected life (in air)	5 years

Pressure Sensor

Range	0.7 to 10barA (-3 to 90MSW or -10 to 300FSW)
Accuracy (including annual drift)	-0.07bar +0.04bar
Response time (t90)	<1s
Detection mode	Piezoresistive
Expected life (in air)	>12 months (Replaced as a part of the O2sensor)

Click here to download Data Sheet

Click here to download Technical Manual

Description

The Sub Aspida is a personal, portable monitor which is used to detect levels of carbon dioxide (CO2) and oxygen (O2) in pressurized environments.

CO2 monitoring & O2 monitoring with the Sub Aspida

Unlike industrial sensing monitors, the Sub Aspida was designed with pressure corrected sensors, giving you 100% confidence in your readings. The Sub Aspida has been upgraded to support those who work at high altitude. Pressure tested to 10,000 ft or 700 MB, the Sub Aspida will remain accurate and reliable when monitoring CO2 and O2 in the atmosphere, meaning you can concentrate on the job at hand!

Technical Specification

SUB-ASPIDA

Operating temperature	0°C to +50°C
Operating pressure	700 to 1200 mbara
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	12 hours under normal operation (Passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A, DC jack 5.5x12.0x2.1mm centre +ve
Electronics warranty	2 years
IP rating	IP65
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (LxDxW)
Weight	335g/11.8oz , O2 350g/12.3oz, CO2 335g/11.8oz

SENSORS

CO2 Sensor Unit	O2 Sensor Unit
Sensor type	Analox infrared MIR	Electrochemical
Accuracy (at standard temperature and pressure)	±(1% of full scale + 2% of reading)	±1% of full scale (For best performance, calibrate the Sub Aspida while on battery power only.)
Range	0.01 to 50.0 mbar ppCO2 (0.01 to 5% at 1000 mbara)	0.1 to 2000.0 mbar ppO2 (0.1 to 100% O2 at 1000 mbara)
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	1 year (expected)

Descriptions

The Analox APM (Atmosphere Protection Module) is a configurable modular system which has the ability to monitor up to 2 gasses. This unique solution can be used as a stand alone atmosphere monitor or it can be integrated into existing PMS systems.

Technical Specifications

System Specifications

Operating Temperature	0°C to +45°C +32°F to +113°F
Operating pressure	700 to 1300mBar
Humidity Range	0 to 95% RH
Power	24vDC (nominal) as standard
Communications	MODBUS RTU
Relays	2 as standard
Calibration interval	Before mission and / or every 3 months

Sensor Unit

Sensor type	Range	Danger
CO2	NDIR	0 to 5% / 0 to 30mBar	Toxic
O2 (Depleted)	Electrochemical	0 to 25% / 0 to 2500mBar	Asphyxiation
O2 (enriched)	Electrochemical	0 to 25% / 0 to 2500mBar	Fire/explosion
R134a	NDIR	0 to 1000ppm	Asphyxiation
VOCs	PID	0 to 20ppm	Toxic

Click here to download Data Sheet

Download Pumped Detectors Technical Manual

Description

The O2 Portable is an oxygen monitor designed to provide sample readings from cylinders containing different levels of O2. The O2 Portable is supplied with a sampling adaptor to be easily fitted to cylinders. O2 MONITORING WITH THE O2 PORTABLE

Ensuring the oxygen content of a cylinder is correct is vital to ensure the safety of the end user. The O2 Portable provides a fast and accurate reading of O2 levels in that cylinder, easy to use as an instant spot check, the handheld unit is quick and simple to operate, with a robust design. The O2 Portable has a large digital display and operates from an internal temperature compensated 3 year life (expected) electrochemical oxygen sensor. Power is provided by a 9V, 4000-hour life battery giving up to 3 years of operation before replacement is necessary.

Technical Specification

O2 PORTABLE

Range	0.1% to 100% in O2
Accuracy	±1% of reading over range 0 to 50% when calibrated on air in accordance with the manual ±2% of reading over range 0 to 100% when calibrated on certified pure oxygen in accordance with the manual
Sensor Warranty	2 years (graded)
Sensor Response	<15 seconds to T90
Power	9V Alkaline (PP3)
Operating Temp	5°C to 50°C
Dimensions	64mm x 98mm x 36mm (w x h x d)
Weight	200g

Click to download Data Sheet

Click here to download User Manual

Click here to download Quick Start Guide

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Click outside to hide the comparison bar

Compare