AGA-UNI-MED-Multi-Function Examination Table

• The height and tilt adjustments are controlled by an electric motor. Precision double square guides are installed in the height adjustment mechanism of the AGA-UNI-MED.
• The maintenance-free and extremely quiet electric drives used in the AGA-UNI-MED are controlled by foot switches (alternatively - at no extra charge - by hand switches). The adjustment systems are equipped with key locks. Motor connection values (each): 230V, 50/60 Hz, 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
• The two lifting columns (low-voltage electric drives) of the AGA-DUO-LIFTO-MED, which are characterized by their smooth running, are made of anodized light metal. They are controlled by a transformer and operated by a handset with six buttons. The hand control is multitasking, allowing simultaneous height and tilt adjustment. Motor connection values (each): 230V, 50/60Hz, 6.0A, 240W, IPX6, v=16mm/s, 2 x 1,000N.
• Adjustment of Trendelenburg and anti-Trendelenburg positions.
• The stability and robustness is achieved by the gusset plates in the frame corners.
• A high level of stability is ensured by the wide projection of the base frame, which is fitted with levelling feet.
• The upholstered frame is chrome-plated. The base frame of the AGA-UNI-MED is also chrome-plated and that of the AGA-DUO-LIFTO-MED is lacquered blank steel.
• A pair of standard rails, made of stainless steel, dimensions 25 x 10 mm, length 1,720 mm, are attached to the side of the upholstered frame to hold accessory components.
• The thickness of each of the three upholstery segments (head, middle and foot sections) is 64 mm.
• There are cutouts in the upholstery and upholstery frame at the foot end, where the stainless steel tray included in the scope of delivery, dimensions 300 x 200 x 65 mm (L x W x H) is located.
• Adjustment of the head, middle and foot sections is continuous. They are locked in place using clamping handles with clamping rod mechanisms.

• A pair of standard rails attached to the side of the upholstered frame.
• A pair of leg holders with plastic shells.
• A pair of fastening clamps.
• Cutouts in the foot section and upholstery frame.
• A stainless steel tray with holder.
• A paper roll holder attached to the head end of the upholstered frame.
• A floor frame with levelling feet.
• The foot or hand switches.

• BILIPOD LED Double Surface Phototherapy Unit Sturdy Baby Trolley consists of –  Collapsible Acrylic Side Panels  Transparent Baby Tray with Bubble Mattress  Height Adjustment and Angle Adjustment for Overhead LED Module  Four Swivelling castor wheels with brakes Certified Also available - Bilipod Double Surface Phototherapy Unit with Detachable trolley
• Uniform Light Distribution with 11 High Intensity LED Lamps uniform body coverage • Observation Lamp Two Observation White LEDs provide enough light to observe the color of baby’s skin • High Irradiance Levels Irradiance > 30 µW/cm²/nm enables faster bilirubin breakdown • Pin Drop Silent Operation zero noise cooling fan • Optimum Wavelength Range: 420 to 490 nm • Very Low Power Consumption of only 30W • Effective Surface Area : 40cm x 50cm
• Life of Lamps - 30000 hours • Lamp Tilt up to 90° • Height Adjustability up to 50cm • Light Weight Lamp Unit weighs less than 3 Kg • Portable can be placed above Infant incubator or below the Infant Warmer Bassinet to give under surface Phototherapy • Sleek & Compact Lamp Unit Size : 45 x 30 x 5 cm takes minimum space • Timer: LCD Based Timer measuring Total Lamp Usage and Patient Timer
• BiliProbe Irradiance Meter Handheld Irradiance (Flux) meter for measurement of the output of conventional Phototherapy Units.  Bandpass filter - 425nm to 475nm  Range: 0 to 200 uW/cm²/nm  Minimal Graduation: 1 uW/cm²/nm  Accuracy: ± 10%  Measuring Time: Approx 4-5 sec  Press to ON Switch  Battery: 9V Alkaline Phototherapy Eye PATCH has been designed to assure complete comfort, and eye protection for infants during Phototherapy Treatment  Adjustable Band for proper comfort and secure fit  Easy to use design  Large eye protection pad increases light protection  Single Piece wrap around design can be independently adjusted to prevent unwanted movement.  Available in 3 sizes - Preterm, Term and Neonatal Phototherapy Eye Patch

Click Here To Download Catalogue 

• It is made of high-strength aluminum alloy thick-wall pipes.
• The bed surface is made of foamed cushion and the adjustable back making the wounded feel comfortable.
• This machine is very convenient.
• One person is enough to send the patient to the ambulance car.
• The mechanical foldaway legs are controlled by the handles on both ends of the stretcher and the legs can be folded under the stretcher automatically when loading into the vehicle.
• The stretcher can be locked by the fixing devices when on the ambulance car.
• This type of stretcher is characterized by its light-weighted,durable, safe usage and easy for sterilization.
• The stretcher adopts stretcher trolley and stretcher to separate structure.
• High position :1900*550*920mm
• Low position :1900*550*260mm
• Maximum angle of the back: 75°
• Loading bearing: <=159kg
• Net Weight: 43kg
• Gross Weight: 49kg