New

CO2 Mainstream Module Capno-M

$0.00

Shipped From Abroad

A mainstream end-tidal carbon dioxide monitoring sensor, it has a unique sample cell that protects internal NDIR components from pollution. Compatible with multiple protocols (Respironics, Phasein, CPT, KM, etc.)

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Brands:: Kingst

Description

Features of CO2 Mainstream Module Capno-M
  • Plug and play

There is no circuit inside the host, just a serial port.

  • High Precision

Carefully selected multi-channel narrowband filters and infrared light sources, hardware design, and software algorithm, to achieve a high signal-to-noise ratio, to ensure measurement accuracy in the temperature range of 5-50°C and the concentration range of 0-20%.

  • Low Power Consumption

Suitable for battery-powered use, instant start, and accurate data can be obtained within 10 seconds of power-on.

  • Atmospheric pressure and Interference gas compensation

By receiving the pressure and interfering gas parameters input by the host, the compensation calculation can be automatically performed to ensure measurement accuracy on a variety of occasions.

  • OEM Solution

Reliable EtCO2 OEM solutions, multiple communication protocols to make your products quickly upgrade assembly.

 

Specifications of CO2 Mainstream Module Capno-M
Technique Non-dispersive infrared gas analysis, multi-channel infrared detector, no moving parts
Storage condition -40°C to 70°C,<93% RH, non-condensing
Working condition 5 to 50°℃,10 to 90% RH, non-condensing
Circumstance pressure 55-115kP
Power demand 5V ± 5% (max ripple 200 mVp-p)
Power consumption <150mA
interface RS-232/Standard E-8-1, 38.4 kBaud,10 ms data interval (KM) or customized communication protocol.
CO2 measurement range 0-150 mmHg, 0-20 kPa, 0-19.7%
CO2 resolution 0.1mmHg
co2 measurement accuracy 0 – 40 mmHg ± 2 mmHg 41 – 70 mmHg ± 5% of reading 71 – 100 mmHg ± 8% of reading 101 – 150 mmHg ± 10% of reading
Respiration rate 3-150 bpm
Respiration rate accuracy ±1% of reading or ±1 rpm whichever is greater
Anesthetic gas compensation N2O, O2, Agent (HOST supplied)
Barometric Pressure Barometric Pressure 400 to 860 mm Hg automatic
Warm-up time To reach designed deviation 97% within 8s, to reach designed deviation within 20s.
Rise time About 70ms
CO2 Stability Shortly drifting: drifting less than 1 mmHg, after 4 hours’ power on. Long drifting: drifting does not influence nominal accuracy after continuous 140 hours of power on.
Calibration No routine user calibration required
Zero proceeding when replacing the adaptor
EtCO2 calculation every breath, or 10 or 20 seconds averagely

 

Application Scenarios of CO2 Mainstream Module Capno-M
  • High signal-to-noise ratio

Capno-M is a mainstream CO2 module.

It is equipped with high-quality Multi-Channel Narrowband Filters, IR Light Source, Well-designed Hardware Circuit, and Software Algorithms to achieve gas concentration measurement with a high signal-to-noise ratio;

  • Long continuous working time

With the self-developed adapters, they can continuously work for a long time in high-temperature environment.

  • Plug-and-play

It can be used in conjunction with a multi-parameter monitor. The monitor only needs one interface, which can be connected to the module for use.

  • Atmospheric pressure compensation

There is an internal atmospheric pressure sensor, which can automatically adjust the atmospheric pressure and suitable for various altitude ranges and harsh environments;

  • OEM solutions

We provide the reliable carbon dioxide OEM solutions, with multiple protocols, so that products can be quickly upgraded and assembled.

 

Reviews

There are no reviews yet.

Be the first to review “CO2 Mainstream Module Capno-M”

Your email address will not be published. Required fields are marked *

Quick Comparison

CO2 Mainstream Module Capno-M removePlastic Test Tube Rack removeConical Glass Flask 500ml removeOptika B-150D-BRPL Digital Binocular Microscope removeConical Glass Flask 250ml removeLab/Ward Coat remove
NameCO2 Mainstream Module Capno-M removePlastic Test Tube Rack removeConical Glass Flask 500ml removeOptika B-150D-BRPL Digital Binocular Microscope removeConical Glass Flask 250ml removeLab/Ward Coat remove
ImageOptika B-150D-BRPL Digital Binocular Microscope
SKUSF1033560084-174SF1033560084-159SF1033560098-2SF1033560084-158SF1033560084-222
Rating
Price

$0.00

$3.00

$6.00

$0.00

$5.70

$11.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad A mainstream end-tidal carbon dioxide monitoring sensor, it has a unique sample cell that protects internal NDIR components from pollution. Compatible with multiple protocols (Respironics, Phasein, CPT, KM, etc.)
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Sturdy high-impact plastic rack will hold from 6 to 31 test tubes up to 25mm in a diameter
  • Easy to assemble
  • Chemical resistant
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Measuring flask
  • Conical shape with long neck, ideal for swirling
  • Lined with metric increments up to 500ml
  • Reinforced rim
  • Ideal for measuring and mixing spirits and cocktail ingredients
  • Great for molecular mixology and molecular gastronomy
  • Dishwasher safe
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad Cordless digital binocular microscope ideal for students and primary schools, with four PLAN achromatic lenses (1000x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, mechanical stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination.
Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • 250ml graduated glass erlenmeyer flask
  • Made from borosilicate with low thermal expansion rate,high temperature tolerance, high strength and hardness
  • High chemical properties,base resistance and acid resistance
  • Narrow mouth design with 29/40 ground joints
  • Large marked metric scale,easy to read
  • Fit for lab chemistry experiment
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features of CO2 Mainstream Module Capno-M
  • Plug and play
There is no circuit inside the host, just a serial port.
  • High Precision
Carefully selected multi-channel narrowband filters and infrared light sources, hardware design, and software algorithm, to achieve a high signal-to-noise ratio, to ensure measurement accuracy in the temperature range of 5-50°C and the concentration range of 0-20%.
  • Low Power Consumption
Suitable for battery-powered use, instant start, and accurate data can be obtained within 10 seconds of power-on.
  • Atmospheric pressure and Interference gas compensation
By receiving the pressure and interfering gas parameters input by the host, the compensation calculation can be automatically performed to ensure measurement accuracy on a variety of occasions.
  • OEM Solution
Reliable EtCO2 OEM solutions, multiple communication protocols to make your products quickly upgrade assembly.  
Specifications of CO2 Mainstream Module Capno-M
Technique Non-dispersive infrared gas analysis, multi-channel infrared detector, no moving parts
Storage condition -40°C to 70°C,<93% RH, non-condensing
Working condition 5 to 50°℃,10 to 90% RH, non-condensing
Circumstance pressure 55-115kP
Power demand 5V ± 5% (max ripple 200 mVp-p)
Power consumption <150mA
interface RS-232/Standard E-8-1, 38.4 kBaud,10 ms data interval (KM) or customized communication protocol.
CO2 measurement range 0-150 mmHg, 0-20 kPa, 0-19.7%
CO2 resolution 0.1mmHg
co2 measurement accuracy 0 - 40 mmHg ± 2 mmHg 41 - 70 mmHg ± 5% of reading 71 - 100 mmHg ± 8% of reading 101 - 150 mmHg ± 10% of reading
Respiration rate 3-150 bpm
Respiration rate accuracy ±1% of reading or ±1 rpm whichever is greater
Anesthetic gas compensation N2O, O2, Agent (HOST supplied)
Barometric Pressure Barometric Pressure 400 to 860 mm Hg automatic
Warm-up time To reach designed deviation 97% within 8s, to reach designed deviation within 20s.
Rise time About 70ms
CO2 Stability Shortly drifting: drifting less than 1 mmHg, after 4 hours’ power on. Long drifting: drifting does not influence nominal accuracy after continuous 140 hours of power on.
Calibration No routine user calibration required
Zero proceeding when replacing the adaptor
EtCO2 calculation every breath, or 10 or 20 seconds averagely
 
Application Scenarios of CO2 Mainstream Module Capno-M
  • High signal-to-noise ratio
Capno-M is a mainstream CO2 module. It is equipped with high-quality Multi-Channel Narrowband Filters, IR Light Source, Well-designed Hardware Circuit, and Software Algorithms to achieve gas concentration measurement with a high signal-to-noise ratio;
  • Long continuous working time
With the self-developed adapters, they can continuously work for a long time in high-temperature environment.
  • Plug-and-play
It can be used in conjunction with a multi-parameter monitor. The monitor only needs one interface, which can be connected to the module for use.
  • Atmospheric pressure compensation
There is an internal atmospheric pressure sensor, which can automatically adjust the atmospheric pressure and suitable for various altitude ranges and harsh environments;
  • OEM solutions
We provide the reliable carbon dioxide OEM solutions, with multiple protocols, so that products can be quickly upgraded and assembled.
 
  • Sturdy high-impact plastic rack will hold from 6 to 31 test tubes up to 25mm in a diameter
  • Easy to assemble
  • Chemical resistant

  • Measuring flask
  • Conical shape with long neck, ideal for swirling
  • Lined with metric increments up to 500ml
  • Reinforced rim
  • Ideal for measuring and mixing spirits and cocktail ingredients
  • Great for molecular mixology and molecular gastronomy
  • Dishwasher safe
Cordless digital binocular microscope ideal for students and primary schools, with four PLAN achromatic lenses (1000x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, mechanical stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination. Slim and easy to carry, it is equipped with all the main controls to start learning how to use an advanced microscope and with long lasting LED illumination to provide over 20 years of use. The exclusive Li-Ion battery ensures unparalleled duration and fast recharge. Features:
  • Observation mode: Brightfield.
  • Head: Binocular, 30° inclined; 360° rotating. With integrated 3.1 MP camera.
  • Eyepieces: WF10x/18 mm, secured by screw.
  • Nosepiece: Quadruple ball bearings revolving nosepiece.
  • Objectives: – N-PLAN 4x/0.10 , with anti-fungus treatment – N-PLAN 10x/0.25 , with anti-fungus treatment – N-PLAN 40x/0.65 , with anti-fungus treatment – N-PLAN 100x/1.25 (Oil/Water) , with anti-fungus treatment
  • Specimen stage: Mechanical stage, 125x116mm, 70×30 mm X-Y movement range. Vernier scale on the two axes, accuracy: 0.1mm.
  • Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
  • Condenser: Abbe N.A. 1.25, pre-centered, focusable, with iris diaphragm.
  • Illumination: X-LED1 with white 1 W LED and light intensity control.
  • Color temperature: 6,300 K. Li-Ion battery for long lasting operation. Multi-plug 100-240Vac/5Vdc external power supply.
  Technical Specifications:
Observation Method - Transmitted Light Brightfield Yes
  Simple polarized light As optional
Main Body Type Upright
  Construction material Aluminum die-cast
Head Head Binocular (Siedentopf)
  Inclination 30°
  360° rotating Yes
  Interpupillary distance (mm) 48-75
  Dioptric adjustement On left tube
  Fixing screw for eyepieces Yes
  Tube inner diameter (mm) 23
Eyepieces Field number (mm) 18
  Magnification 10x
  High eyepoint (for glass wearers) Yes
  Pointer As optional
  Micrometric scale As optional
  Diameter of micrometer glass (mm) 20
Nosepiece Positions Quadruple
  Bi-directional Yes
  Rotation on ball bearings Yes
  Objective thread RMS
Objectives Optical system 160
  Anti-fungus treatment Yes
  Parfocal distance (mm) 45
  Standard magnifications 40x-1000x
  Type N-PLAN
  Objectives included 4x/0.10, W.D. 15.2 mm
  10x/0.25, W.D. 5.5 mm
  40x/0.65, W.D. 0.45 mm
  100x/1.25 (Oil/Water), W.D. 0.13 mm
Stage Type Double layer
  Dimensions (mm) 125x116
  Moving mechanism Rack and pinion
  Moving range (mm) 70x30
  Material Anti-scratch painting
  Specimen holder Yes
  Slide number 1
  X-Y Vernier scale Yes
  Vernier scale accuracy (mm) 0.1
Condenser - Single Position Type Abbe
  Numerical aperture (N.A.) 1.25
  Diaphragms Iris
  Centrable Pre-centered
  Focusable By rotation
Focusing System Type Coaxial coarse & fine
  Coarse total travel (mm) 16
  Fine total travel (per single rotation) (mm) 0.4
  Fine graduations 100
  Fine resolution (µm) 4
  Upper stop to prevent contact Yes
  Adjustable tension Yes
Transmitted Illumination Type X-LED
  X-LED type X-LED1
  Light source power (W) 1
  Brightness control Manual
  Lifetime (hours) > 65,000
  Temperature (K) 6,300
  Max. required power (W) 1.5
Power Supply for Transmitted Illumination Type External
  Microscope connector Jack, 2.1 mm
  Power plug type Multi-plug (EU, UK, US)
  Input voltage 100/240 Vac, 50/60 Hz
  Output voltage 5 Vdc 500 mA
  LED indicator Yes
  Rechargeable batteries Yes
  Battery type Li-ion (battery pack)
  Working time of batteries (hours) 15
  Charging time of batteries (hours) 6
Accessories Included Dust cover Yes
  Immersion oil (10ml) Yes
  Tension adjustment tool Yes
  User Manual Digital version (downloadable)
  USB cable (m) 1.8
  CD-ROM Yes
Additional Information Mirror for transmitted light (as optional)
Product Dimensions Height (mm) 365
  Width (mm) 170
  Depth (mm) 320
Product Weight (kg) 4
Digital Head Resolution (MP) 3.2
Sensor type CMOS
Sensor size 1/2.5"
Sensor aspect ratio 4/3
Full image size 2048x1536
Pixel size (µm) 2.2x2.2
Frame rate 4 fps (2048x1536), 8 fps (1280x1024), 30 fps (640x480)
S/N ratio (dB) 40
Dynamic range (dB) 66.5
Sensitivity (V/lux*s @550nm) 0.53
Exposure time (s) 15 - 1/1500
USB type 2.0
System requirements Win 7 / Win 8 / Win 10 (32/64 bit)
Software OPTIKA PROView
  • 250ml graduated glass erlenmeyer flask
  • Made from borosilicate with low thermal expansion rate,high temperature tolerance, high strength and hardness
  • High chemical properties,base resistance and acid resistance
  • Narrow mouth design with 29/40 ground joints
  • Large marked metric scale,easy to read
  • Fit for lab chemistry experiment
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare