MRI Patient Transport Table with Side guards

$0.00

Shipped From Abroad

MRI Patient transport tables up to 7 Tesla – with side guards for safer patient transport

The MRI tables with side guards from AGA Sanitätsartikel were specially designed for use in magnetic resonance (abbreviated MR or MRI). The frame components are made of slightly magnetic stainless steel or aluminium and brass. The low level of residual magnetism does not affect the imaging process, nor are the MRI patient transport tables attracted by the magnetic field of the MR system. It can be used on MR systems up to 7 Tesla without any problems. The two side guards included in the scope of delivery serve as fall protection and for safer patient transport. These MRI patient transport tables can be used safely under the following conditions:

  • Static magnetic field of 7 Tesla or less,
  • With an additional spatial gradient of maximum 7 T/m or less,
  • The table must not exceed the limit line of 7 T/m with the head end/foot end in the direction of movement towards the magnet.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130137-7

Description

Features
  • The MRI patient transport couches are equipped with swivel castors, Ø 100 mm. All four can be totally locked in turning and running directions.
  • The MRI tables are available in two upholstery widths:
    • Width 650 mm, Article No.: AWL-3065/VA,
    • Width 800 mm, Article No.: AWL-3080/VA.
  • Two side guards are supplied with these MRI tables for safer patient transport.
  • The side guards, dimensions approx. 800 x 250 mm (L x H), can be lowered to the upholstery height using a pivot mechanism and secured using spring-loaded handwheels with fixing bolts.
  • Please take into account the complete table widths including the side guards:
    • The MRI table, Article No.: AWL-3065/VA, is 795 mm wide,
    • The MRI table, Article No.: AWL-3080/VA, is 975 mm wide.
  • The stability and robustness is achieved by the gusset plates in the frame corners and the cross and longitudinal braces between the legs.
  • The tubular steel frame of the MRI tables is made of stainless steel. It has a low residual magnetism.
  • It can be used with a static magnetic field of a maximum of 7 Tesla or less.
  • The thicknesses of the two upholstered segments (headrest and main surface) are each 64 mm.
  • If no height is specified when the order is placed, the MRI patient transport tables will be delivered with a height of 650 mm (also available in heights of 700, 750 and 800 mm at no extra charge).
  • The adjustment of the head section is continuously variable up to +40°. It is locked in place with a clamping handle using a clamping rod mechanism.
Technical data
MRI tables with side guards
Article number AWL-3065/VA AWL-3080/VA
Frame Stainless steel
Length
Headrest / main section
1,900 mm
500 / 1,400 mm
Width 650 mm
(795 mm with side guards)
800 mm
(975 mm with side guards)
Side guards 800 x 250 mm (L x H), pivoting
Heights (no extra charge) 650 / 700 / 750 / 800 mm
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40° (clamping rods)
Load capacity 200 kg
Castors Ø 100 mm, all 4 with locking function
The standard configuration includes:
  • A set of castors, consisting of four swivel castors, Ø 100 mm. All four castors are lockable.
  • Two side guards, dimensions 800 x 250 mm (L x H). So that these MRI patient transport tables can also be used from both sides, the side guards can be adjusted, pointing upwards or downwards, with a simple pivot mechanism and fixed with spring-loaded handwheels.
Accessories & additional options
Article No. Description
INF-1720/VA Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent.
P-3050
P-3070
Paper roll holder bar, for table width 650 mm.
Paper roll holder bar, for table width 800 mm.
Made of CrNi steel, Ø 8 mm, length of the paper roll holder bar 515 / 690 mm. For mounting at the foot end of the MRI table, between the table legs. Retrofitting is not possible.
PG-220
PG-260
Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables.
Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables.
Sewn from synthetic leather, with Velcro fastener (hook and loops straps), see upholstery colours.
ULKRS-4022 All-around edge protection/impact protection, black, dimensions approx. 40 x 22 mm, with aluminium insert, mounted on the upholstery frame (and on the side rails). Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “MRI Patient Transport Table with Side guards”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsMRI Patient Transport Table with Side guards removePatient Trolley removeAuto loader Collapsible Stretcher removeOne Crank Hospital Bed removeHydraulic Delivery Bed removeHospital Crash Cart Mst-ABS25 ABS Medical Emergency Nursing Trolley remove
NameMRI Patient Transport Table with Side guards removePatient Trolley removeAuto loader Collapsible Stretcher removeOne Crank Hospital Bed removeHydraulic Delivery Bed removeHospital Crash Cart Mst-ABS25 ABS Medical Emergency Nursing Trolley remove
Image
SKUSF1033560130137-7SF1033560084-97SF1033560084-111SF1033560084-120SF1033560084-165SF1033560084-121
Rating
Price

$0.00

$235.00

$385.50

$125.00

$0.00

$620.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad
MRI Patient transport tables up to 7 Tesla - with side guards for safer patient transport

The MRI tables with side guards from AGA Sanitätsartikel were specially designed for use in magnetic resonance (abbreviated MR or MRI). The frame components are made of slightly magnetic stainless steel or aluminium and brass. The low level of residual magnetism does not affect the imaging process, nor are the MRI patient transport tables attracted by the magnetic field of the MR system. It can be used on MR systems up to 7 Tesla without any problems. The two side guards included in the scope of delivery serve as fall protection and for safer patient transport. These MRI patient transport tables can be used safely under the following conditions:

  • Static magnetic field of 7 Tesla or less,
  • With an additional spatial gradient of maximum 7 T/m or less,
  • The table must not exceed the limit line of 7 T/m with the head end/foot end in the direction of movement towards the magnet.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
Material: Metal
Type: Emergency Trolley
Folded: Unfolded
Using Ambient: Hospital
Numbers of Function: One-Function
Certification: CE, FDA, ISO13485
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
Color: Orange
Folded: Folded
Certification: ISO, FDA, CE
Material: Aluminum
Number of Belts: Four
Type: Ambulance Stretcher
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Product Size : 202*90*50cm
  • Head and foot frame made of stainless steel tube
  • Adjustable backrest , with one chrome plated crank
  • Under the bed with a store rack
  • Load bearing: 250kg;
  • Custom options: Functions, mattress , side rails , Accessories and Colors.
  • Knock down construction
  • Metal Type: Iron
  • Material: Metal
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Made of high-strength ABS material
  • One-piece ABS plastic top board with raised-edge design, covered transparent soft plastic glass.
  • With five drawers: two small size, two middle size and one big size, each inner with partitions which can be organized freely
  • One central lock or disposable seal for all drawers
  • With transfusion hooks on top and medical equipment holding board
  • ABS Medical Crash Cart with CPR Board for Patient with acute stroke
  • Pull-out silding typed writing shelf makes efficiency of space application
  • Four luxurious noiseless casters, two with brakes
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • The MRI patient transport couches are equipped with swivel castors, Ø 100 mm. All four can be totally locked in turning and running directions.
  • The MRI tables are available in two upholstery widths:
    • Width 650 mm, Article No.: AWL-3065/VA,
    • Width 800 mm, Article No.: AWL-3080/VA.
  • Two side guards are supplied with these MRI tables for safer patient transport.
  • The side guards, dimensions approx. 800 x 250 mm (L x H), can be lowered to the upholstery height using a pivot mechanism and secured using spring-loaded handwheels with fixing bolts.
  • Please take into account the complete table widths including the side guards:
    • The MRI table, Article No.: AWL-3065/VA, is 795 mm wide,
    • The MRI table, Article No.: AWL-3080/VA, is 975 mm wide.
  • The stability and robustness is achieved by the gusset plates in the frame corners and the cross and longitudinal braces between the legs.
  • The tubular steel frame of the MRI tables is made of stainless steel. It has a low residual magnetism.
  • It can be used with a static magnetic field of a maximum of 7 Tesla or less.
  • The thicknesses of the two upholstered segments (headrest and main surface) are each 64 mm.
  • If no height is specified when the order is placed, the MRI patient transport tables will be delivered with a height of 650 mm (also available in heights of 700, 750 and 800 mm at no extra charge).
  • The adjustment of the head section is continuously variable up to +40°. It is locked in place with a clamping handle using a clamping rod mechanism.
Technical data
MRI tables with side guards
Article number AWL-3065/VA AWL-3080/VA
Frame Stainless steel
Length Headrest / main section 1,900 mm 500 / 1,400 mm
Width 650 mm (795 mm with side guards) 800 mm (975 mm with side guards)
Side guards 800 x 250 mm (L x H), pivoting
Heights (no extra charge) 650 / 700 / 750 / 800 mm
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40° (clamping rods)
Load capacity 200 kg
Castors Ø 100 mm, all 4 with locking function
The standard configuration includes:
  • A set of castors, consisting of four swivel castors, Ø 100 mm. All four castors are lockable.
  • Two side guards, dimensions 800 x 250 mm (L x H). So that these MRI patient transport tables can also be used from both sides, the side guards can be adjusted, pointing upwards or downwards, with a simple pivot mechanism and fixed with spring-loaded handwheels.
Accessories & additional options
Article No. Description
INF-1720/VA Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent.
P-3050 P-3070 Paper roll holder bar, for table width 650 mm. Paper roll holder bar, for table width 800 mm. Made of CrNi steel, Ø 8 mm, length of the paper roll holder bar 515 / 690 mm. For mounting at the foot end of the MRI table, between the table legs. Retrofitting is not possible.
PG-220 PG-260 Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables. Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables. Sewn from synthetic leather, with Velcro fastener (hook and loops straps), see upholstery colours.
ULKRS-4022 All-around edge protection/impact protection, black, dimensions approx. 40 x 22 mm, with aluminium insert, mounted on the upholstery frame (and on the side rails). Retrofitting is not possible.
Material: Metal
Type: Emergency Trolley
Folded: Unfolded
Using Ambient: Hospital
Numbers of Function: One-Function
Certification: CE, FDA, ISO13485
Model NO.: BS-602
Condition: New
Castors: Taiwan Castor
Castor Lock: 4′ Silent Castors with 2 Skids.
Spare Part Warranty: 1 Year
Lifetime: More Than 10 Years
Certificate: Ce ISO FDA
Usage: Advanced Medical Motor System
Load Capacity: 250kgs
Trademark: Bossay
Transport Package: Export Standard Packing
Specification: 1900*630*800mm
Origin: China
HS Code: 94029000
  • It is made of high-strength aluminum alloy thick-wall pipes.
  • The bed surface is made of foamed cushion and the adjustable back making the wounded feel comfortable.
  • This machine is very convenient.
  • One person is enough to send the patient to the ambulance car.
  • The mechanical foldaway legs are controlled by the handles on both ends of the stretcher and the legs can be folded under the stretcher automatically when loading into the vehicle.
  • The stretcher can be locked by the fixing devices when on the ambulance car.
  • This type of stretcher is characterized by its light-weighted,durable, safe usage and easy for sterilization.
  • The stretcher adopts stretcher trolley and stretcher to separate structure.
  • High position :1900*550*920mm
  • Low position :1900*550*260mm
  • Maximum angle of the back: 75°
  • Loading bearing: <=159kg
  • Net Weight: 43kg
  • Gross Weight: 49kg
  • Product Size : 202*90*50cm
  • Head and foot frame made of stainless steel tube
  • Adjustable backrest , with one chrome plated crank
  • Under the bed with a store rack
  • Load bearing: 250kg
  • Custom options: Functions, mattress , side rails , Accessories and Colors
  • Knock down construction
  • Metal Type: Iron
  • Material: Metal

This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Technical Specifications:

  • Table top dimension: length 1900mm, width 610mm
  • Min.& Max. table height: 660mm~910mm
  • Trendelenburg & reverse trendelenburg: reverse trend ≥ 10°, trend ≥15°
  • Back section turning: -10°~75°
  • Assist platform dimension: length 550mm, width 550mm
  • Arm rest swing out: ≥ 90°
  • Filth basin dimension:468×338×125mm(can be equipped with soft pipe)
  • Power: AC 220V 50HZ
Standard Accessories:
  • Waterproof cushion - 1 set
  • Waist grab handle - 1 pair
  • Leg holder - 1 pair
  • Filth basin - 1 piece
  • Arm rest - 1 pair
  • Foot switch - 1 piece
  • Clamp - 1 pair
  • Made of high-strength ABS material
  • One-piece ABS plastic top board with raised-edge design, covered transparent soft plastic glass.
  • With five drawers: two small size, two middle size and one big size, each inner with partitions which can be organized freely
  • One central lock or disposable seal for all drawers
  • With transfusion hooks on top and medical equipment holding board
  • ABS Medical Crash Cart with CPR Board for Patient with acute stroke
  • Pull-out silding typed writing shelf makes efficiency of space application
  • Four luxurious noiseless casters, two with brakes
Technical Specifications:
Model MST-ABS25
Material Strong ABS
Product Size 750X480X920mm
Layer No. 5 Layers
IV Pole 1 pc
Dust basket 2 pcs
Needle Disposal Holder 1 pc
File bin 1 set
Defibrillator shelf 1 set
Sliding side shelf 1 set
Power tank holder 1 set
Stainless steel guard rail 1 set
Transparent soft plastic glass 1 pc
Centralized lock 1 pc
Drawers  5 pcs
Luxurious noiseless casters 4 pcs
Package Size 780*520*1040mm
 
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare