HU.Q hq-460dy Dry Image X-Ray Film Printer

$3,850.00

Shipped From Abroad

  • It is the one and only domestically engineered medical dry thermal imager.  The HQ-DY series Dry Imager uses the latest direct dry thermal imaging technology which accommodates for a full range of applications, including CT, MR, DSA and US, as well as CR/DR applications for GenRad, Orthopaedics, Dental Imaging and more

Delivery & Availability:
Typically 14-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

SF10335601102
Brands:: HU.Q

Description

It is the one and only domestically engineered medical dry thermal imager.  The HQ-DY series Dry Imager uses the latest direct dry thermal imaging technology which accommodates for a full range of applications, including CT, MR, DSA and US, as well as CR/DR applications for GenRad, Orthopaedics, Dental Imaging and more. The HQ-Series Dry Imager dedicates to precision in diagnosis with its outstanding image quality, and offers affordable imaging catering to your needs.

– Dry thermal technology
– Daylight load film cartridges
– Double tray, supports 4 film sizes
– Speed printing, higher efficiency
– Economical, stable, reliable
– Compact design, easy installation
– Straight forward operation, user-friendly

Usage

The HQ-DY series dry imager is a medical imaging output device. It is engineered to achieve its optimal performance when used with HQ-brand medical dry films. Different from the old method of film processors, our dry imager can be operated under daylight condition. With the elimination of chemical liquid, this thermal dry printing technology is significantly more environmentally friendly. However, to ensure the quality of output image, please keep away from heat source, direct sunlight, and acid and alkaline gas such as hydrogen sulfide, ammonia, sulfur dioxide, and formaldehyde, etc.

Technical Specification:

Print Technology

Direct thermal (dry, daylight-load film)

Spatial Resolution

320dpi (12.6 pixels/mm)

Grayscale Contrast Resolution

14 bits

Film Tray

Two supply trays, 200-sheet capacity total

Film Sizes

8’’×10’’, 10’’×12’’, 11’’×14’’, 14’’×17’’

Applicable film

Medical Dry Thermal Film (blue or clear base)

Interface

10/100/1000 Base-T Ethernet (RJ-45)

Network Protocol

Standard DICOM 3.0 connection

Image Quality

Automatic calibration using built-in densitometer

Control Panel

Touch Screen, Online Display, Alert, Fault and Active

Power Supply

100-240VAC  50/60Hz  600W

Weight

50Kg

Operating Temperature

5℃-35℃

Storage Humidity

30%-95%

Storage Temperature

-22℃-50℃

 

Click Here To Download Catalogue

Review(1)

4.00 average based on 1 ratings.
  1. Umar Halilu

    I need to buy the dry imager 460 and it’s film

Add a review

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsHU.Q hq-460dy Dry Image X-Ray Film Printer removeAnke MRI Openmark 5000 Permanent System removeLab/Ward Coat removeDrGem GXR-SD 400mA Floor Mounted Digital X-ray removeIBIS Neeo R9 Digital Surgical C-Arm removeSingle X-Ray Viewing Box remove
NameHU.Q hq-460dy Dry Image X-Ray Film Printer removeAnke MRI Openmark 5000 Permanent System removeLab/Ward Coat removeDrGem GXR-SD 400mA Floor Mounted Digital X-ray removeIBIS Neeo R9 Digital Surgical C-Arm removeSingle X-Ray Viewing Box remove
ImageMRI OpenmarkDrGem GXR-SD 400mA Floor Mounted Digital X-ray MachineIBIS Neeo R9 Digital Surgical C-Arm
SKUSF10335601102SF1033560092-3SF1033560084-222SF1033560074-5SF1033560011-1SF1033560084-203
Rating
Price

$3,850.00

$0.00

$11.00

$0.00

$0.00

$95.20

Stock
Availability
Add to cart

DescriptionShipped From Abroad
  • It is the one and only domestically engineered medical dry thermal imager.  The HQ-DY series Dry Imager uses the latest direct dry thermal imaging technology which accommodates for a full range of applications, including CT, MR, DSA and US, as well as CR/DR applications for GenRad, Orthopaedics, Dental Imaging and more
Delivery & Availability: Typically 14-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad OPENMARK 5000 is 0.51T MRI. It's approved by FDA and has CE mark. It adopts two-pillar magnet design with 280 degree openness and equipped with powerful RF and gradient system, together with advanced imaging technology, making it as a high-end system which is comparable to high-field MRI.

Delivery & Availability:

Typically 90 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In Stock The GXR-SD Digital X-ray is a diagnostic digital radiography system that provides reliable high quality digital radiographic images with a reduced dose. The GXR-SD DR systems offer comprehensive digital solutions to all radiography needs, featuring ACQUIDR digital imaging system with stationary or portable digital flat-panel detectors as well as reliable high-frequency x-ray generators that are known worldwide for their excellent performance, lifetime and stability. Patient tables and wall stands are also offered. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad Our Neeo “C” arms are easy to place, use and are specifically designed to be used in orthopedics, traumatology, abdominal surgery, urology, cardiology and operating rooms. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In stock
  • Length: 355 mm
  • Height: 560 mm
  • Diameter: 150 mm
  • Power: 30 w
  • Scattering diffusion: Greater than 0.9
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
ContentIt is the one and only domestically engineered medical dry thermal imager.  The HQ-DY series Dry Imager uses the latest direct dry thermal imaging technology which accommodates for a full range of applications, including CT, MR, DSA and US, as well as CR/DR applications for GenRad, Orthopaedics, Dental Imaging and more. The HQ-Series Dry Imager dedicates to precision in diagnosis with its outstanding image quality, and offers affordable imaging catering to your needs. - Dry thermal technology - Daylight load film cartridges - Double tray, supports 4 film sizes - Speed printing, higher efficiency - Economical, stable, reliable - Compact design, easy installation - Straight forward operation, user-friendly
Usage
The HQ-DY series dry imager is a medical imaging output device. It is engineered to achieve its optimal performance when used with HQ-brand medical dry films. Different from the old method of film processors, our dry imager can be operated under daylight condition. With the elimination of chemical liquid, this thermal dry printing technology is significantly more environmentally friendly. However, to ensure the quality of output image, please keep away from heat source, direct sunlight, and acid and alkaline gas such as hydrogen sulfide, ammonia, sulfur dioxide, and formaldehyde, etc. Technical Specification:

Print Technology

Direct thermal (dry, daylight-load film)

Spatial Resolution

320dpi (12.6 pixels/mm)

Grayscale Contrast Resolution

14 bits

Film Tray

Two supply trays, 200-sheet capacity total

Film Sizes

8’’×10’’, 10’’×12’’, 11’’×14’’, 14’’×17’’

Applicable film

Medical Dry Thermal Film (blue or clear base)

Interface

10/100/1000 Base-T Ethernet (RJ-45)

Network Protocol

Standard DICOM 3.0 connection

Image Quality

Automatic calibration using built-in densitometer

Control Panel

Touch Screen, Online Display, Alert, Fault and Active

Power Supply

100-240VAC  50/60Hz  600W

Weight

50Kg

Operating Temperature

5℃-35℃

Storage Humidity

30%-95%

Storage Temperature

-22℃-50℃

 
Click Here To Download Catalogue
OPENMARK 5000 is 0.51T MRI. It's approved by FDA and has CE mark. It adopts two-pillar magnet design with 280 degree openness and equipped with powerful RF and gradient system, together with advanced imaging technology, making it as a high-end system which is comparable to high-field MRI. Features:
  • With the highest system stability and the highest homogeneity of the magnet field in permanent MRI
  • Screens on both sides facilitate positioning; 280 degree two-pillar magnet design ensures stable magnet structure and facilitates interventional treatment.
  • Active and passive shimming calibrate technology ensures the magnetic field uniformity
  • Motor-driven patient couch makes it easier for patients to access and for positioning
  • Powerful hardware and software platforms ensure the scan speed, image quality and make it possible for advanced imaging functions
  • Fast scan speed eliminates motion artifact
  • Rich scan sequences, advanced imaging technology and powerful postprocessing technology ensure image quality, extend more applications, which can fully satisfy the clinical needs
  • Intelligent user-friendly operating system ensures you easy operation
Technical Specifications:
No. Technique Description Parameter
1 Magnet System
 1.1  Magnet Type Permanent Magnet Automatic constant temperature system
1.2 Field Strength 0.51T
1.3 Magnet Shape Dual-pillar shape
1.4 Homogeneity(40cm,DSV,VRMS) ≤1.6ppm
1.5 Shim Method Active/Passive
1.6 Magnet Vertical Gap (Cover) 40cm
1.7 Magnetic Pole Dia. (Exclude Cover) 145cm
1.8 Accessibility(Horizontal Opening Angle, 280°
1.9 5 Gauss fringe field X-axis:horizontal ≤2.5m Y-axis:Vertical ≤2.5m Z-axis:horizontal ≤2.5m
2 Patient Couch and Communication
2.1 Patient Couch Driven mode Motor-driven
2.2 Max. Patient Weight ≥200kg(440lbs)
2.3 Patient Positioning Tools Laser Light Localizer for positioning of center slice Motor-driven transfer to center of imaging volume
2.4 Position accuracy ±1mm
2.5 Emergency Call Key Yes
2.6 Intercom System Yes
3 Gradient System
3.1 Gradient Field Strength(Single Axis) ≥30mT/m
3.2 Gradient Slew Rate (Single Axis) ≥100mT/m/ms
3.3 Rise Time ≤0.3ms
3.4 Gradient Cooling System ( Gradient coils and Power electronics) Air Cooling
4 RF System
4.1 RF System Type Digital Transmit and Receive signal
4.2 Number of RF Channels 4
4.3 Transmitter Amplifier Peak Power 6kW
4.4 RF Bandwidth of Receiver ≥1.25MHz
4.5 Head Coil Yes
4.6 Neck Coil Yes
4.7 Body/Spine Coil (17 inch) Yes
4.8 Body/Spine Coil (21 inch) Yes
4.9 Knee Coil Yes
4.10 Shoulder Coil Yes
4.11 Flexible Coil Optional
4.12 Breast Coil Optional
5 Computer System
5.1 Host Computer DELL Computer (for MR)
5.2 System Software Windows XP
5.3 Operation Software APEX
5.4 CPU Clock rate 3.0GHz
5.5 Main Memory 4GB
5.6 Color LCD Monitor 19”
5.7 Keyboard and Mouse Standard
5.8 Image Reconstruction Speed(256 x 256 Matrix) 200 frame/Sec.
5.9 Hard Disk 500GB
5.10 Image Storage Capacity(256 x 256 Matrix) 500,000
5.11 Media Driver DVD RW
5.12 DICOM 3.0 Yes
5.13 Ethernet Yes
5.14 Operation Console Yes
5.15 Operation Chair Yes
6 Scanning Parameter
6.1 Max. FOV 410mm
6.2 Min. FOV 5mm
6.3 Min. TE(SE) 5ms
6.4 Min. TR(SE) 11ms
6.5 Min. TE(GR) 1ms
6.6 Min. TR(GR) 3ms
6.7 Min. 2D Thickness 1.0mm
6.8 Min. 3D Thickness 0.1mm
6.9 Max. Image Matrix 512x512
7 Scanning Sequence & Imaging Technique
7.1 Spin Echo 2D/3D (SE 2D/3D) Yes
7.2 DE/QE Yes
7.3 Fast Spin Echo 2D/3D(FSE 2D/3D) Yes
7.4 Single Shot FSE 2D/3D Yes
7.5 Inversion Recovery(IR) Yes
7.6 Fast Inversion Recovery(FIR) Yes
7.7 Gradient Echo 2D/3D(GR 2D/3D) Yes
7.8 Fast GR 2D/3D Yes
7.9 SPGR Yes
7.10 FLAIR Yes
7.11 Fat Imaging Yes
7.12 Fat Suppression imaging Yes
7.13 Water-Fat Separation imaging Yes
7.14 TOF MRA(2D/3D) Yes
7.15 MRCP(2D/3D) Yes
7.16 MRU (2D/3D) Yes
7.17 MRM Yes
7.18 Fast Hydrograph Imaging Yes
7.19 Diffusion Weighted Imaging(DWI) Yes
7.20 Max. b Value 1000s/mm2
7.21 Breath Hold Technology Yes
7.22 Magnetization Transfer Contrast(MTC) Yes
7.23 Multi-slice and Angle-free Presaturation Yes
7.24 Saturation Tracking Yes
7.25 Maximum Intensity Projection(MIP) Yes
7.26 Multi-Angle Projection(MAP) Yes
7.27 3D Reconstruction Yes
7.28 Multi-planar Reconstruction(MPR) Yes
7.29 Multi-Artifacts Eliminating technology Yes
7.30 Checking with Part Metal Implant Yes
7.31 Online Image Filtration Yes
7.32 Online Post Procession Yes
7.33 3D Scout Yes
7.34 Scanning Protocol Preset Yes
7.35 Scanning Protocol Queue Waiting Yes
7.36 Advanced Image Post Processing Yes
7.37 Image Fusion Technology of Vascular Yes
7.38 Image Fusion Technology of Spine Yes
 
Click Here To Download Catalogue
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
DrGem GXR-SD 400mA Floor Mounted Digital X-ray system matches with a radiographic room which perfectly fits your workow and can be easily upgraded to DR system with the help of DR interface and PC interface in GXR generator as well as Bucky suitable to Flat Panel Detector. GXR X-ray system is equipped with a high frequency X-ray generator which consistently produces high quality radiograph in favor of high quality X-ray output with a very small kV ripple and accurate mA and mAs. GXR X-ray system is designed to provide convenience to operator and comfort to patient Features of DrGem GXR-SD 400mA Floor Mounted Digital X-ray:
  • PBT-6 is a 4 way Motorized Tabletop with Elevating feature (66cm). A large tabletop with extended travel enables all radiography studies with minimal patient movement. Fully fat tabletop without a frame on the edge makes cleanliness and odors free
  • Automatic Stitching - GXR-SD system provides outstanding automatic stitching function with Source tilting method
  • Digital Flat Panel Detector (FPD) – Wireless 17X14 (Csl, 4336W) with Auto Exposure Detection (AED) function, there is no DR trigger cable between detector and generator.
  • Full Featured Imaging Software & Excellent Digital Image Processing:
  1. Provides convenient user interface and easy operation
  2. Anatomical view-based digital image processing automatically optimizes and enhances the quality of the captured image for the pictured anatomy.
  3. Radiographic stand & automatic collimator control function
  4. DICOM 3.0 networking interface includes Worklist, Print, Store, Query for integration with any PACS or RIS
  • Included – Software, HP Laptop Computer
  1. CPU≥3.2GHz
  2. Memory capacity:≥4GB
  3. Hard drive capacity :≥500 GB
  4. Resolution: 1280 x 1024
  5. Display size: 21 inch color LCD screen
  6. 64 bit Windows 10 operation system
  7. Core: i5
  Technical Specifications of DrGem GXR-SD 400mA Floor Mounted Digital X-ray:
  • Power Rating - 32KW
  • Generator - GXR-32S
  • Rotor - Dual Speed Starter(DSS)
  • Input Power - 400/480VAC, Three phase
  • Line Frequency - 50/60Hz
  • X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU)
  • Tube Voltage - 40 to 150kV, 1kV Step
  • Tube Current – 10 to 640mA
  • Output - 640mA@81kV,  500mA@104kV, 400mA@130kV, 320mA@150kV
  • Time Range - 1ms to 10s
  • mAs Range - 0.1 to 800mAs
  • Reproducibility - Coe­cient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01
  • Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs)
  • Linearity - Coe­cient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs
 
Click Here To Download Catalogue
Our Neeo “C” arms are easy to place, use and are specifically designed to be used in orthopedics, traumatology, abdominal surgery, urology, cardiology and operating rooms. Using Neeo with the RTP (Real Time Processing) option it is possible to perform vascular, urological and cardiological diagnostics. One of the main functions, digital image subtraction, allows to see, as an example, the passage of contrast liquids in a tissue or in a venous or arterial duct; thanks to the possibility of looping, the acquired video can be reproduced several times to monitor more accurately the passage of the fluid within the area in question. Angiographic measurement is another useful function in the vascular field (QA Quantitative Angiography) that allows the measurement of stenoses. Finally, fluoroscopy allows the correct positioning of stents or expanders. Neeo is used in various interventional and diagnostic procedures in traumatology and orthopedics wards and operating rooms as well. Thanks to low-dose fluoroscopy, it is possible to use the device for positioning bone or subcutaneous grafts, inserting K-wire (Kirschner wire) for stabilization of bone fragments or for the correct positioning of prostheses. The low dose emitted ensures safe use for both the patient and the surgeon or doctor on the operating field. On the control panel there is a large touch screen display that allows to adjust the basic functions of the equipment. From this display it is possible to select and adjust the fluoroscopic data for the examination, activate or deactivate the laser pointer, select between pulsed, one shot or standard fluoroscopy, rotate the image and perform all operations on collimator. The four side buttons on the display offer the possibility to move the bow vertically thanks to an extremely silent motor. Neeo has two 19 “medical grade monitors that can be positioned according to the needs of the medical practitioner. Work monitors and feedback monitors are separated to be managed independently. The possible movements are: rotation, revolution, tilting and possibility of height adjustment. Features:
  • Continuous fluoroscopy
  • Pulsed fluorography
  • One Shot fluoroscopy
  • Low dose fluoroscopy
  • Radiography with cassette (up to 5KW)
  • 110,000 images of memory (Standard)
  • 19 ″ Medical Flat Monitor (X2)
  • Touch control panel
  • Image Processing – 1K X 1K, 16 bit
  • DAP-Dose Area Meter
  • DSA Road Mapping
  • Laser Marker
Technical Specification:
  • Power: 5KW
  • kV Range (kV): 40 - 120
  • mAs Range (mAs): 1 - 250
  • SID (mm): 1000
  • Free Space (mm): 730
DICOM Feature:
  • RTP-SW DSA
  • RTP-SW QA
  • RTP-SW Worklist
  • RTP-SW Print
  • RTP-SW CD DVD Saving
  • RTP-SW MPPS
  • RTP-SW Query/Retrieve
  • RTP-SW HCF
  • RTP-SW BASE
  • RTP-SW STCOMMIT
Configuration: C-Arm Structure, Trolley for Monitor, Collimator, Monoblock, Toshiba 12” Image Intensifier, 19″ Philips Medical Flat Monitor (X2), Camera CD1030CA 1KX1K, Sony Printer UP-X898MD, Cassette Holder
Click Here To Download Catalogue
  • Length: 355 mm
  • Height: 560 mm
  • Diameter: 150 mm
  • Power: 30 w
  • Scattering diffusion: Greater than 0.9
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

Advanced, Advanced Plus, Basic, Smart

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare