Abbott i-STAT Handheld Blood Gas Analyzer

• Lab-quality results fast: Only four steps needed to get important results in less time and at less cost
• Simple to use: Clear and comprehensive instructions help operator through testing process
• Broad test menu: Single-use i-STAT test cartridges cover a large menu of testing options in one platform

• technical support ensures that the i-STAT System is supported at all times

• Reduce potential for errors
• Promote collaboration among clinical teams, allowing for consultation with colleagues to make immediate treatment decisions at the bedside
• Quickly respond to any need or change in a patient’s condition
• Interact with the patient’s family, without leaving the patient’s side and increase family involvement and confidence
• As a result, the i-STAT System can enhance patient satisfaction by minimising wait times and length of stay

Click To Download Catalogue

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

• Ease of use in application and maintenance
• Designed with sample and reagent ID-barcode reading, in-tip dilution reducing consumable costs
• Intuitive and highly flexible open software with complete data reduction and LIS interfaces
• Integrated PC and touchscreen eliminates the need for an external workstation
• Smart time-management allows processing up to 3 microplates simultaneously

• Photometric range: 0 to 3.0 OD
• Spectral range: 400 nm to 700 nm (up to 8 filters)
• Read time: < 15 sec single, < 30 sec dual
• Precision: 1% CV at 1.0 OD
• Accuracy: ±0.005 OD or 2.5 % (whichever is greater)
• Linearity: 0 to 2.000 OD ±1 %

• Min / max. volumes: 10 µl to 300 µl with 300 µl tip, 301 µl to 1000 µl with 1100 µl tip
• Precision (single dispense): < 3 % CV at 20 µl, < 3 % CV at 100 µl
• Precision (multi dispense): < 10 % CV at 16 x 20 µl, < 3 % CV at 8 x 100 µl
• Features: Pipetting pressure monitoring, capacitive liquid level detection, tip detection, mixing, multiple dilution steps, archiving

• Sample and reagent capacity: Up to 192 samples (Flexible: e.g. 144 samples + 8 reagents + 16 controls)

• Temperature range: Up to 45 °C
• Temperature uniformity: ±1.5 °C (with in-process temperature uniformity monitoring)
• Shaking: 20 Hz

• Precision: 10% CV at 300 µl
• Residual volume: <2.5 µl in U-bottom (mean), <4 µl in flat bottom (mean)
• Wash buffer capacity: 3 wash buffers
• Modes: Sweep mode, soak, top and bottom wash, variable pump speed

• Width x Depth x Height: 125 cm x 65 cm (without waste bag) x 75 cm with closed cover (49” x 26” x 30”)

Click Here To Download Catalogue

• The device is used to heat chemicals used in laboratories without being exposed to open flame.
• Glass wool is used as insulation material in the device.
• Since there is no heater or pump in the chamber, there is no loss in net volume.
• The device provides precise temperature measurement thanks to its microprocessor control.
• Additional security measures have been taken against overheating with the safety thermostat that can be adjusted between 30-90 degrees.
• There is a drainage system for the discharge of excess water in the device.
• The inner chamber is made of monoblock stainless steel with rounded corners to reduce the risk of contamination in the device.
• The outer body is stainless steel made of electrostatic painted galvanized sheet.
• The device offers the user the opportunity to program between 0 and 99.99 hours.
• The device provides wide usage opportunity with delayed start and indefinite operating mode.
• Emsaş A.Ş. All medical devices manufactured by us are guaranteed for 2 years.

• Parameters: Na+,K+,Cl-, iCa++ / Li
• It works on ISE principle
• Sample Type: Whole blood, Serum, Plasma, Urine
• Low reagent consumption
• Sample requirement is only 90ul
• 60 samples per hour
• Automatic two point calibration after 4hrs and one point calibration with each sample analysis
• Air bubble detection
• Track reagents consumption and provides alerts
• For low reagent volume
• Precision testing facility to get CV and SD
• Trilevel Quality Control with LJ plots of last 30days
• Low aspiration volume
• Fast sample processing
• Accurate and Precise results

Click Here To Download Catalogue

• Outside Dia.: 87mm
• Material of Construction: Glass
• Capacity: 500mL
• Labware Outside Dia. - English: 3.4"
• Labware Capacity - English: 16.9 oz.
• Graduation Range: 100 to 500mL
• Height: 118mm
• Disposable/ Reusable: Reusable
• Labware Body Color: Clear
• Graduation Subdivisions: 100ml
• Beaker Type: Low Form
• Labware Outside Dia. - Metric: 87mm
• Series: Hauler 4x4 Crew Diesel
• Special Features: Pouring Spout
• Labware Inside Dia. - English: 3.2"
• Sterile/Non-Sterile: Non-Sterile
• Labware Inside Dia. - Metric: 81mm
• Labware Body Material: Glass
• Color: Clear
• Labware Height - English: 4.6"
• Labware Height - Metric: 118mm
• Labware Basic Material: Glass
• Item: Low Form Beaker
• Glassware Class: Not Rated
• Graduations: Yes
• Labware Capacity - Metric: 500mL
• Autoclavable: Yes