AGA- Phlebology table
$0.00
Shipped From Abroad
Phlebology tables with a 3-piece tabletop, also for use as an examination chair
The 3-piece phlebology tables AGA-PHLEBO-LIFT and AGA-PHLEBO-MAT from AGA Sanitätsartikel can be used not only in phlebology and dermatology. They can be converted into a gynaecology, rectoscopy or proctology examination chair in just a few seconds. The 3-piece vein treatment tables are also equipped with an electric motor for tilt adjustment as standard. On the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, there is a second electric motor for height adjustment in addition to the electric motor for tilt adjustment.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
- If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
- The stability and robustness is achieved by the gusset plates in the frame corners.
- The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
- The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
- The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
- The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
- The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
- The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
- The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
- Cutouts are incorporated into the seat and foot sections.
Technical data
| AGA-PHLEBO-LIFT | AGA-PHLEBO-MAT | |
|---|---|---|
| Article number | VEKO-1060/3EE | VEKO-1062/3E |
| Frame | Lacquered | |
| Length Back/seat/foot sections |
1,900 mm 1,020 / 365 / 465 mm |
|
| Width | 620 mm (680 mm with standard rails) |
|
| Height adjustment | 730 – 930 mm (electric motor) | – |
| Height | – | 930 mm |
| Tilt adjustment | -20º / +74º (electric motor) | |
| Upholstery segments | 3 sections | |
| Upholstery thickness | 64 mm | |
| Back section adjustment | +30º (gas pressure spring) | |
| Load capacity | 150 kg | |
| Leg section adjustment | Folding down using locking pins | |
The standard configuration includes:
- A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
- A pair of black ring armrests, including fastening clamps for standard surgical rails.
- A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
- The foot switch(es).
- A safety support rod that can be pulled out from the floor frame.
- A cutout at the foot of the leg section for easier getting on and off.
- A floor frame with levelling feet.
- A neck roll with two straps, fixed to the back cushion.
- A cutout in the seat cushion for gynaecological examinations.
- A safety limit switch to avoid damage caused by the folded leg section.
Accessories & additional options
| Article No. | Description |
|---|---|
| A-2047 | Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail. |
| FR-60 | Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs. Retrofitting is not possible. |
| LR/Z-50 | Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible. |
| P-2065/A | Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame. |
| PEF-1043 | Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours. |
| PG-220 | Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours. |
| VA-40/V | Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible. |
Quick Comparison
| AGA- Phlebology table remove | Conical Glass Flask 500ml remove | Glass Measuring Cylinder 500ml remove | 3B Scientific Flexible Human Skeleton Model Fred - 3B Smart Anatomy remove | Chemical Weighing Balance remove | Tripod Stand remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | AGA- Phlebology table remove | Conical Glass Flask 500ml remove | Glass Measuring Cylinder 500ml remove | 3B Scientific Flexible Human Skeleton Model Fred - 3B Smart Anatomy remove | Chemical Weighing Balance remove | Tripod Stand remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image | |  |  |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | SF1033560130137-16 | SF1033560084-159 | SF1033560084-163 | SF1033560099-4 | SF1033560084-190 | SF1033560084-186 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Shipped From Abroad
Phlebology tables with a 3-piece tabletop, also for use as an examination chairDelivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| In stock
| In stock
| Ship from abroad
Fred offers all the advantages of a 3B Scientific® skeleton. Fred's bendy spine can copy almost any human movement too. Once bent, Fred will remain in that position, to show correct and incorrect postures as well as any pathological malalignments
| In stock
This is a 210g/0.001g Analytical electronic chemical balance for industrial and scientific field.
| In stock
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content |
Technical data
The standard configuration includes:
Accessories & additional options
|
|
| Fred offers all the advantages of a 3B Scientific® skeleton. Fred's bendy spine can copy almost any human movement too. Once bent, Fred will remain in that position, to show correct and incorrect postures as well as any pathological malalignments. All skull movements can be shown on the head joints. Protruding spinal nerves and vertebral arteries are also shown on this skeleton, as well as a dorsolateral slipped disc between the 3rd and 4th lumbar vertebrae. Now available on a stable metal stand with 5 casters! Here are Fred's other advantages: • Top quality, life-size natural casting • Made from a durable, unbreakable synthetic material • 3-part assembled skull with individually inserted teeth • Close to the realistic weight of around 200 bones • Easy to remove limbs • On a stable metal stand with 5 casters (painted white) • Exceptional value for money • Final assembly carried out by hand • 3 year guarantee Comes with metal stand and transparent dust cover. | This is a 210g/0.001g Analytical electronic chemical balance for industrial and scientific field.
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reviews
There are no reviews yet.