F&A DUACEM

$0.00

F&A MerFill DUACEM is a dual-cure universal resin cement designed for strong and reliable dental bonding. It ensures excellent adhesion to various restorative materials, high mechanical strength, and long-term stability, making it ideal for permanent cementation procedures in dentistry.

Brands:: F&A Medical

Description

Universal polymeric strengthened adhesive cement of double curing.

It is intended for cementing inlays and onlays, and is also used as a basis for the erection of a composite stump. F&A Duacem is also recommended for fixing fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.

 

INDICATIONS FOR USE:

  • Cementation of inlays and onlays.
  • Cementation of fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.
  • Fixation of indirect restorations.
  • As a basis for the construction of composite stump.
  • Cementation of stump inlays.
  • Fixation of adhesive bridges.

PRODUCT BENEFITS:

  • Insoluble in oral fluids.
  • Contains fluorides.
  • Radio contrast material.
  • Thixotropic with excellent flow characteristics.
  • Possesses extremely small film thickness (less than 8 microns) and a high filler content.
  • Possesses excellent adhesion to dental tissues, metal and ceramics.
  • Universal shade CHM (Chameleon).
  • System: paste/paste.

METHOD OF USING:

  • During bonding procedures, careful control of oral fluids is needed to prevent contamination of the prepared are and of light-cured cement. Good result s can be achieved by using cofferdam, retraction of the gums by threads and cotton rollers in combination with the evacuation system (saliva ejector).
  • Place equal amount of Paste A and Paste B on a mixing pad.
  • Mix two Pastes for about 20 seconds until a homogeneous mixture is obtained.’
  • If a clinical case requires only chemical curing, then the material’s working time at a temperature of 23 °C is 120 seconds. Full curing of the material occurs after 6 – 8 minutes. In the case of light curing, the cement reaches strength after 20-30 seconds of irradiation.
  • Apply a thin layer of the mixed paste on the restoration  and on the surface of the cavity and place the restoration into the cavity. Avoid applying excess material onto the restoration as well as onto the walls of the cavity.
  • Remove excess material with an appropriate tool. Avoid excessive removal of the material especially at the border of restoration and cavity. A slight excess of material may be left, if necessary.
  • Cure the material with a curing lamp in places where it is possible. While fixing ceramic or composite restorations, cure F&A Duacem by directing the lamp light through the restoration.
  • During the fixation of restoration in this way a longer exposure time is required. The exposure time depends on the thickness of the restoration
  • To prevent the formation of the layer inhibited by oxygen use  a barrier gel.

Reviews

There are no reviews yet.

Be the first to review “F&A DUACEM”

Your email address will not be published. Required fields are marked *

Quick Comparison

F&A DUACEM removeWall Mounted Sphygmomanometer Aneroid removeOVO Obturation Pen removeDurable Dental Chair Unit removeOVO Gutta Cutter removeMobile Dental X-ray Unit with Chair remove
NameF&A DUACEM removeWall Mounted Sphygmomanometer Aneroid removeOVO Obturation Pen removeDurable Dental Chair Unit removeOVO Gutta Cutter removeMobile Dental X-ray Unit with Chair remove
Image
SKUSF103356013047SF103356013096-1SF1033560067SF103356013096-2SF1033560069
Rating
Price

$0.00

$0.00

$0.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

Description

F&A MerFill DUACEM is a dual-cure universal resin cement designed for strong and reliable dental bonding. It ensures excellent adhesion to various restorative materials, high mechanical strength, and long-term stability, making it ideal for permanent cementation procedures in dentistry.

In Stock
The Six Inch range of sphygmomanometers provide clinicians with amazing quality at affordable prices. A modern solution for all locations with innovative and practical features included. Delivery & Availability: Typically 4-12 Working Days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
OVO Obturation Pen is a cordless warm vertical compaction device that uses heat to cut, soften, downpack,
and compact root canal filling material (gutta percha).
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Feature: 1. All controlled by the electric valve 2. DC Motor.(2000N) 3. Automatic thermostatic water supply system 4. Handpiece tubing with standard fittings (3sets), 5.Three way syringe (one for hot, one for cold)(2sets), 6.Water suction and saliva ejector (with switch)(1set), 7. Powerful suction apparatus (1set each) 8. Easy cleaning Integral and turn able toughened glass spittoon
Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Product Description
Cutting of gutta percha.
The Cutter has a flexible and ergonomic design, this makes it convenient to operate and enhances the ease of use.
The use of this device can greatly reduce the time taken to complete the final stages of endodontic treatment.
Fast heating in a very short time.
Inclusion of 4 heating tips of different shapes, makes the use of this device versatile.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
 
Product Description:
  1. The microprocessor-controlled timer brings high-tech X-ray imaging at your fingertips.
  2. The control panel allows an accurate and fast exposure time selection while protecting the head during X-ray examinations.
  3. Fitted with 70KV 8mA tube with preheating grid, the machine has been specially designed for intraoral dental diagnosis applications
Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
ContentUniversal polymeric strengthened adhesive cement of double curing. It is intended for cementing inlays and onlays, and is also used as a basis for the erection of a composite stump. F&A Duacem is also recommended for fixing fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.   INDICATIONS FOR USE:
  • Cementation of inlays and onlays.
  • Cementation of fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.
  • Fixation of indirect restorations.
  • As a basis for the construction of composite stump.
  • Cementation of stump inlays.
  • Fixation of adhesive bridges.
PRODUCT BENEFITS:
  • Insoluble in oral fluids.
  • Contains fluorides.
  • Radio contrast material.
  • Thixotropic with excellent flow characteristics.
  • Possesses extremely small film thickness (less than 8 microns) and a high filler content.
  • Possesses excellent adhesion to dental tissues, metal and ceramics.
  • Universal shade CHM (Chameleon).
  • System: paste/paste.
METHOD OF USING:
  • During bonding procedures, careful control of oral fluids is needed to prevent contamination of the prepared are and of light-cured cement. Good result s can be achieved by using cofferdam, retraction of the gums by threads and cotton rollers in combination with the evacuation system (saliva ejector).
  • Place equal amount of Paste A and Paste B on a mixing pad.
  • Mix two Pastes for about 20 seconds until a homogeneous mixture is obtained.'
  • If a clinical case requires only chemical curing, then the material’s working time at a temperature of 23 °C is 120 seconds. Full curing of the material occurs after 6 - 8 minutes. In the case of light curing, the cement reaches strength after 20-30 seconds of irradiation.
  • Apply a thin layer of the mixed paste on the restoration  and on the surface of the cavity and place the restoration into the cavity. Avoid applying excess material onto the restoration as well as onto the walls of the cavity.
  • Remove excess material with an appropriate tool. Avoid excessive removal of the material especially at the border of restoration and cavity. A slight excess of material may be left, if necessary.
  • Cure the material with a curing lamp in places where it is possible. While fixing ceramic or composite restorations, cure F&A Duacem by directing the lamp light through the restoration.
  • During the fixation of restoration in this way a longer exposure time is required. The exposure time depends on the thickness of the restoration
  • To prevent the formation of the layer inhibited by oxygen use  a barrier gel.
Wall Mounted Sphygmomanometer Aneroid The Six Inch range of sphygmomanometers provide clinicians with amazing quality at affordable prices. A modern solution for all locations with innovative and practical features included. The precision mechanism ensures smooth and reliable performance and gives immediate response to changes in cuff pressure. The wall model features a swivel wall bracket for easy viewing and cuff storage is included behind the gauge  Features of Wall Mounted Sphygmomanometer Aneroid:
  • Made in UK and guaranteed accurate to ISO 81060-1
  • Range 0–300mmHg, with the scale graduations starting at zero
  • Clear white face with sharp black scale
  • New flexible shock mount resists any damage to the gauge
  • Fine red pointer gives precise indication
  • Smaller, lighter and easily portable
  • Fitted with your choice of Velcro or Ambidex cuff
  • Tough bright white ABS construction with built in carrying handle
  • Lightweight ABS cuff container which is very easy to clean
.
Product Details:
1.Effectively and tightly compacts and seals gutta percha
2.Cordless and lightweight. Easy to hold, clean, and store
3.Quick heating tip reaches the highest level of temperature within one (1) second to save treatment time
4.two sizes heating condensers are available
(#55/06, #55/08) for choose
5.Simple operation with two buttons
Technical Specifications
Name OVO Obturation Pen
Power 10W
Battery DC1.2V/2000mAh
Temperature 200℃
Feature: 1. All controlled by the electric valve 2. DC Motor.(2000N) 3. Automatic thermostatic water supply system 4. Handpiece tubing with standard fittings (3sets), 5.Three way syringe (one for hot, one for cold)(2sets), 6.Water suction and saliva ejector (with switch)(1set), 7. Powerful suction apparatus (1set each) 8. Easy cleaning Integral and turn able toughened glass spittoon 9. Strong and weak dual-purpose operation light (1set), 10. X-film viewer (1 set) 11. Spirit lock tight Equilibrium device 12. Suitable for adult and children headrest. 13. Doctor stool (1set), 14. Foot pedal (1set) Specifications:
Voltage: 110V-240V,50Hz/60Hz
Air pressure: 0.55MPa
Water pressure: 0.2MPa-0.4MPa
Highest position: 860mm
Lowest position: 440mm
Highest smallest: Angle of dental chair (5)
Lowest smallest: Angle of dental chair (85)
Width: 52cm
Length: 185cm max
Net weight: 200kg
Gross weight: 250kg
Packing size: 138*100*120cm
Options Accessories 1.High speed air turbine Handpiece (2sets) 2. Low speed air motor Handpiece. (1 set) 3.Fiber optic system for high speed Handpiece (1set) 4. Fiber optic Handpiece.(2sets) 5.Bui It-in LED Curing Light (1set) 6.Built-in Ultrasonic scaler (1 set) 7.Endoscope equipment (1 set) 8.0il-less medical air compressor (1 set) 9.Vacuum pump for suction (1 set) 10.Massage function (1 set)
Click To Download Catalogue
Product Details:
1.Wireless, flexible convenient to operate.
2.Fast heating upto 260 degree.
3.Rechargeable battery.
4.With 4 different shapes of heating tips.The heating tips can be autoclaved, sterilized.
Technical Specifications
Name OVO Gutta Cutter
Material Metel
Battery 1.2V,2400mAh,2.5W
Charger input voltage 110v /220-240v,50-60Hz
Product Description:
  1. The microprocessor-controlled timer brings high-tech X-ray imaging at your fingertips.
  2. The control panel allows an accurate and fast exposure time selection while protecting the head during X-ray examinations.
  3. Fitted with 70KV 8mA tube with preheating grid, the machine has been specially designed for intraoral dental diagnosis applications.
Technical Specification: Tube voltage: 60kVp Tube current: 8mA Focus size: 1.5mm Total filtration:  2.5mmAL Exposure time:  0.2 - 4sec Leak Radiation: Outside one meter ≤ 0.002mGy/h Power supply: AC 220V±10%, 50Hz,1KVA
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare