F&A DUACEM

$0.00

F&A MerFill DUACEM is a dual-cure universal resin cement designed for strong and reliable dental bonding. It ensures excellent adhesion to various restorative materials, high mechanical strength, and long-term stability, making it ideal for permanent cementation procedures in dentistry.

Brands:: F&A Medical

Description

Universal polymeric strengthened adhesive cement of double curing.

It is intended for cementing inlays and onlays, and is also used as a basis for the erection of a composite stump. F&A Duacem is also recommended for fixing fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.

 

INDICATIONS FOR USE:

  • Cementation of inlays and onlays.
  • Cementation of fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.
  • Fixation of indirect restorations.
  • As a basis for the construction of composite stump.
  • Cementation of stump inlays.
  • Fixation of adhesive bridges.

PRODUCT BENEFITS:

  • Insoluble in oral fluids.
  • Contains fluorides.
  • Radio contrast material.
  • Thixotropic with excellent flow characteristics.
  • Possesses extremely small film thickness (less than 8 microns) and a high filler content.
  • Possesses excellent adhesion to dental tissues, metal and ceramics.
  • Universal shade CHM (Chameleon).
  • System: paste/paste.

METHOD OF USING:

  • During bonding procedures, careful control of oral fluids is needed to prevent contamination of the prepared are and of light-cured cement. Good result s can be achieved by using cofferdam, retraction of the gums by threads and cotton rollers in combination with the evacuation system (saliva ejector).
  • Place equal amount of Paste A and Paste B on a mixing pad.
  • Mix two Pastes for about 20 seconds until a homogeneous mixture is obtained.’
  • If a clinical case requires only chemical curing, then the material’s working time at a temperature of 23 °C is 120 seconds. Full curing of the material occurs after 6 – 8 minutes. In the case of light curing, the cement reaches strength after 20-30 seconds of irradiation.
  • Apply a thin layer of the mixed paste on the restoration  and on the surface of the cavity and place the restoration into the cavity. Avoid applying excess material onto the restoration as well as onto the walls of the cavity.
  • Remove excess material with an appropriate tool. Avoid excessive removal of the material especially at the border of restoration and cavity. A slight excess of material may be left, if necessary.
  • Cure the material with a curing lamp in places where it is possible. While fixing ceramic or composite restorations, cure F&A Duacem by directing the lamp light through the restoration.
  • During the fixation of restoration in this way a longer exposure time is required. The exposure time depends on the thickness of the restoration
  • To prevent the formation of the layer inhibited by oxygen use  a barrier gel.

Reviews

There are no reviews yet.

Be the first to review “F&A DUACEM”

Your email address will not be published. Required fields are marked *

Quick Comparison

F&A DUACEM removeDurable Dental Chair Unit removeCryoIQ Pro with LED Light for 16 Gram Gas, & Gas cartridge 25 Gram No2 with Valve removeOVO Paper Points For 02 taper 04 Taper 06 Taper removeStarX Pro Intraoral Imaging removeUltrasonic scaler remove
NameF&A DUACEM removeDurable Dental Chair Unit removeCryoIQ Pro with LED Light for 16 Gram Gas, & Gas cartridge 25 Gram No2 with Valve removeOVO Paper Points For 02 taper 04 Taper 06 Taper removeStarX Pro Intraoral Imaging removeUltrasonic scaler remove
ImageCryoIQ Pro
SKUSF1033560067SF1033560096-6SF103356013096-5SF103356013092-4SF10335601306
Rating
Price

$0.00

$0.00

$0.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

Description

F&A MerFill DUACEM is a dual-cure universal resin cement designed for strong and reliable dental bonding. It ensures excellent adhesion to various restorative materials, high mechanical strength, and long-term stability, making it ideal for permanent cementation procedures in dentistry.

Shipped From Abroad
Feature: 1. All controlled by the electric valve 2. DC Motor.(2000N) 3. Automatic thermostatic water supply system 4. Handpiece tubing with standard fittings (3sets), 5.Three way syringe (one for hot, one for cold)(2sets), 6.Water suction and saliva ejector (with switch)(1set), 7. Powerful suction apparatus (1set each) 8. Easy cleaning Integral and turn able toughened glass spittoon
Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad CryoIQ® PRO Contact is based on our contact freezing system (closed gold plated metal contact tips with diameters of 1, 3, 5, or 7 mm). It provides precise treatment of the affected skin areas only in the size of the contact applicator without damage to the surrounding healthy tissue.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
OVO paper points  are paper cones used during endodontic therapy to dry in the root canal.
Drying the root canal after irrigation to filling is a mandatory step of endodontic treatment.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad

Brilliant images for instant diagnosis

StarX PRO sensors are the new Xline Intraoral sensors built with the latest technologies to deliver perfect images at every shot. Thanks to the USB direct connection, StarX PRO provides brilliant and real-time images with a simple and effective plug and play solution.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
VRN-A8 Wireless control scaler with auto-water supply Function: Scaling, Perio, Endo irrigation Water supply: Auto-water supply Wireless control foot switch Handpiece: Metal Detachable handpiece Color: White Input: AC100~240V 47~63Hz Main unit input: DC30V 1.5A Foot switch battery: 1.5V× 2 Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
ContentUniversal polymeric strengthened adhesive cement of double curing. It is intended for cementing inlays and onlays, and is also used as a basis for the erection of a composite stump. F&A Duacem is also recommended for fixing fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.   INDICATIONS FOR USE:
  • Cementation of inlays and onlays.
  • Cementation of fiber splinting systems, metal, fiberglass and carbon fiber pins and veneers.
  • Fixation of indirect restorations.
  • As a basis for the construction of composite stump.
  • Cementation of stump inlays.
  • Fixation of adhesive bridges.
PRODUCT BENEFITS:
  • Insoluble in oral fluids.
  • Contains fluorides.
  • Radio contrast material.
  • Thixotropic with excellent flow characteristics.
  • Possesses extremely small film thickness (less than 8 microns) and a high filler content.
  • Possesses excellent adhesion to dental tissues, metal and ceramics.
  • Universal shade CHM (Chameleon).
  • System: paste/paste.
METHOD OF USING:
  • During bonding procedures, careful control of oral fluids is needed to prevent contamination of the prepared are and of light-cured cement. Good result s can be achieved by using cofferdam, retraction of the gums by threads and cotton rollers in combination with the evacuation system (saliva ejector).
  • Place equal amount of Paste A and Paste B on a mixing pad.
  • Mix two Pastes for about 20 seconds until a homogeneous mixture is obtained.'
  • If a clinical case requires only chemical curing, then the material’s working time at a temperature of 23 °C is 120 seconds. Full curing of the material occurs after 6 - 8 minutes. In the case of light curing, the cement reaches strength after 20-30 seconds of irradiation.
  • Apply a thin layer of the mixed paste on the restoration  and on the surface of the cavity and place the restoration into the cavity. Avoid applying excess material onto the restoration as well as onto the walls of the cavity.
  • Remove excess material with an appropriate tool. Avoid excessive removal of the material especially at the border of restoration and cavity. A slight excess of material may be left, if necessary.
  • Cure the material with a curing lamp in places where it is possible. While fixing ceramic or composite restorations, cure F&A Duacem by directing the lamp light through the restoration.
  • During the fixation of restoration in this way a longer exposure time is required. The exposure time depends on the thickness of the restoration
  • To prevent the formation of the layer inhibited by oxygen use  a barrier gel.
Feature: 1. All controlled by the electric valve 2. DC Motor.(2000N) 3. Automatic thermostatic water supply system 4. Handpiece tubing with standard fittings (3sets), 5.Three way syringe (one for hot, one for cold)(2sets), 6.Water suction and saliva ejector (with switch)(1set), 7. Powerful suction apparatus (1set each) 8. Easy cleaning Integral and turn able toughened glass spittoon 9. Strong and weak dual-purpose operation light (1set), 10. X-film viewer (1 set) 11. Spirit lock tight Equilibrium device 12. Suitable for adult and children headrest. 13. Doctor stool (1set), 14. Foot pedal (1set) Specifications:
Voltage: 110V-240V,50Hz/60Hz
Air pressure: 0.55MPa
Water pressure: 0.2MPa-0.4MPa
Highest position: 860mm
Lowest position: 440mm
Highest smallest: Angle of dental chair (5)
Lowest smallest: Angle of dental chair (85)
Width: 52cm
Length: 185cm max
Net weight: 200kg
Gross weight: 250kg
Packing size: 138*100*120cm
Options Accessories 1.High speed air turbine Handpiece (2sets) 2. Low speed air motor Handpiece. (1 set) 3.Fiber optic system for high speed Handpiece (1set) 4. Fiber optic Handpiece.(2sets) 5.Bui It-in LED Curing Light (1set) 6.Built-in Ultrasonic scaler (1 set) 7.Endoscope equipment (1 set) 8.0il-less medical air compressor (1 set) 9.Vacuum pump for suction (1 set) 10.Massage function (1 set)
Click To Download Catalogue
CryoIQ® PRO Contact is based on our contact freezing system (closed gold plated metal contact tips with diameters of 1, 3, 5, or 7 mm). It provides precise treatment of the affected skin areas only in the size of the contact applicator without damage to the surrounding healthy tissue. The most versatile model for contact freezing treatment of warts and common skin lesions. Its unique construction with a built-in non-return valve prevents gas leakage, thus giving maximum use of the gas content. With the new PRO model, you now have the possibility to change the tip for different areas of application, such as dermatology, dentistry, podiatry, gynecology/urology, and veterinary. Features:
  • Simple pencil type grip for easy use and accurate application
  • A broad range of applicators
  • Freezing temperature
    • Liquid freezing, -89°C / -128°C
    • Contact freezing, -80°C / -112°C
  • The level of cold generated is adjusted by the rate at which the metering lever is depressed
  • CE marked according to Medical Device II
Technical Specifications:
Name: CryoIQ® PRO Contact
Order.no: CIQ-P-C
Delivered in: Plastic case
Included in delivery: 1 gas cartridge (16 gram) with valve
Weight: 82 gram (including 16-gram cartridge)
Dimensions: Diameter: 22 mm / Length: 130 mm
Freezing temperature: “Liquid freezing”, -89 °C / -128 °F
“Contact freezing”, -80 °C / -112 °F
Contact surface for CIQ-P-C: Diameter: 1, 3 or 5 mm
Material: Gold plated metal
Patented: Yes
CE marked: According to medical device IIA
Warranty: 1 year (2 years after Product registration)
Gas cartridge: 16 or 25 gram
Nitrous Oxide Gas (N2O)
Medical sterile
Built-in filter (5 µm)
 
Product Details
1.Hand rolled for extra absorbency, rolled firmly to hold shape.
2.Rigid enough to insert in canals without curling or bending.
3.Solutions to successful obturation. because they are highly absorbent and have an accurate size of tip and taper.
Technical Specifications
Name OVO Paper Points
Material rubber
Taper 02, 04, 06
Designed for dental clinics seeking fast, high-quality intra-oral imaging, the StarX PRO uses CMOS technology with a Cesium Iodide (CSI) scintillator. Available in two sensor sizes (Size 1 and Size 2), it features rounded edges for patient comfort and a slim profile for easier placement in the oral cavity. Connectivity is via USB for immediate image acquisition, integrating with the OrisWin DG Suite software and supporting DICOM export for clinic workflow. Compatible with both AC and DC intra-oral X-ray generators (60-70 kV), it is waterproof, dust-resistant, and built for clinical durability.b Wide active sensitive area The slim outline and space-saving packaging facilitate the positioning and the visibility of the region of interest while positioning. Long-lasting life Flexible and resistant cable to grant a long sensor life. Plug-and-play solution Thanks to the USB direct connection, StarX PRO is easy to install and always provides brilliant and real-time images.
Product Features
Waterproof The sensors are waterproof and dust resistant, easy to disinfect, clean and store. Full mouth Series and compatibility Multiple functionalities, including the Full Mouth Series, are compatible with the majority of the Patient Management Software on the market and with the entire Xline digital imaging product range. OrisWin DG Suite will integrate perfectly into your existing dental clinic network. Dicom Format The DICOM image format and the multiple filter choices are key features for a customized workflow and a perfect diagnosis. Dedicated positioners A dedicated set of positioners and a tailored sensor holder are available for always perfect positioning, image exposure, and clinic workflow.
Technical Specifications
Sensor sizes 1,2
Measured resolution 20 lp/mm
Theoretical resolution 25 lp/mm
Technology CMOS with CSI scintillator
Pixel Size 20 _m
Sensor Shape Round edges for patient comfort
Sensor activation Plug & play solution, always ready to acquire
Sensor cable length 2 m
Connectivity USB 2.0
Dimensions Size 1: 35,4x28,1x5,3mm; size 2: 39x25x5,6mm
Active area dimensions Size 1: 20x30mm, size 2: 26x34mm
Software OrisWin DG Suite
Operating System Support Windows 10, Windows 8, Windows 7
Licenses Up to 10 workstations running simultaneously with one license
DICOM support Yes
Compatibility with Intraoral Generators Yes, both AC and DC technology, 60-70kV
Click here to download Catalogue
Ultrasonic scaler Features/Specification: VRN-A8 Wireless control scaler with auto-water supply Function: Scaling, Perio, Endo irrigation Water supply: Auto-water supply Wireless control foot switch Handpiece: Metal Detachable handpiece Color: White Input: AC100~240V 47~63Hz Main unit input: DC30V 1.5A Foot switch battery: 1.5V× 2 Receiving sensitivity: -114Db Power: 30VA~48VA Vibration frequency of the tip: 25~31KHz Primary vibration excursion of the tip: ≤ 100μm Output half-excursion: < 2N Ultrasonic output power: 3W~20W Water pressure: 0.01MPa~0.05MPa Weight of main unit: 1.10kg Weight of adapter: 0.25kg
 
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare