Heating mantle PE-4100M (0.5L) analogue

Purpose: 

the heating mantle is intended for heating liquids in round-bottomed flasks with the volume of 500 ml within the temperature range from the ambient one to 450°С

Advantages: - two-zone heating with the possibility of switching off the heating of the top zone - the heating mantle is equipped with electronic temperature controller - heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device - automatic break of the device in case of overheating (the operation returns to normal when the temperature reaches allowable limit) - metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion

Technical specifications: - Housing material: steel covered with powder paint resistant to chemical action - Heating element: fabric fiberglass with nichrome wire - Maximum heater temperature, °С – 450 - Flask volume, ml – 500 - Weight, kg – 3.3 - Dimensions (LхWхH) - 220х325х120 - Power supply voltage (50/60Hz), V - 220-230 - Power consumption, W – 230

• Outside Dia.: 87mm
• Material of Construction: Glass
• Capacity: 500mL
• Labware Outside Dia. - English: 3.4"
• Labware Capacity - English: 16.9 oz.
• Graduation Range: 100 to 500mL
• Height: 118mm
• Disposable/ Reusable: Reusable
• Labware Body Color: Clear
• Graduation Subdivisions: 100ml
• Beaker Type: Low Form
• Labware Outside Dia. - Metric: 87mm
• Series: Hauler 4x4 Crew Diesel
• Special Features: Pouring Spout
• Labware Inside Dia. - English: 3.2"
• Sterile/Non-Sterile: Non-Sterile
• Labware Inside Dia. - Metric: 81mm
• Labware Body Material: Glass
• Color: Clear
• Labware Height - English: 4.6"
• Labware Height - Metric: 118mm
• Labware Basic Material: Glass
• Item: Low Form Beaker
• Glassware Class: Not Rated
• Graduations: Yes
• Labware Capacity - Metric: 500mL
• Autoclavable: Yes

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

• Speed: 11,800rpm with 24- place rotor
• RCF: 14,000g with 24-place rotor
• Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
• Brake: Automatic
• Noise: 62dB running with 24-place rotor
• Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
• Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
• Weight: 5.1Kg net (without rotor)
• Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
• Construction: Aluminium casing with a steel lid
• Finish: Body cream white baked enamel, with matt black baked enamel lid

Click Here To Download Catalogue

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Pad Size: Unfolded: 30 x 60 mm (other size can be request ).
• Folded: 30x30 mm, 30 x 35mm,can be 2ply or 4ply ( other size, ply can be request ).
• Aluminum Package: 60 x 50 mm , 50 x 50mm approximate ( other size can be request ).
• Packing: 100/200 pcs per inner box, 50/ 100 boxes per carton(packing can be request).

• For cleaning prior to injection or to disinfect the hurted skin for family and medical treatment organization use.
• For preparation and immediate disinfection of skin, wound area orr Instrument and utensil.

• Not for eyes;
• keep out of reach of children;
• For external use only;
• please stop using if you feel allergic or amyctic