LTS-T1000- Specific protein Analyzer

The LTS-T1000 Specific Protein Analyzer offers automated quantification of a wide range of biomarkers, including immunoglobulins, complements, and acute-phase proteins, using nephelometry. It supports various sample types (serum, plasma, urine, whole blood), and is designed for use in immunology, nephrology, rheumatology, and general clinical laboratories. The instrument features automated sample processing and calibration routines to enhance throughput, reproducibility, and standardisation in busy diagnostic settings.

Key Features

• Nephelometric immunoassay technology for high-sensitivity protein measurement

• Supports multiple specimen types: serum, plasma, urine, whole blood

• Wide biomarker panel including immunoglobulins (IgG, IgM, IgA), complements (C3, C4) and acute-phase proteins (CRP, etc)

• Automated workflow: sample handling, calibration, and quality control built in

• Suitable for clinical labs: immunology, pathology, nephrology

• Real-time test, results in 20 seconds to 3 minutes
• Calibration by swiping a card is an easy and flexible operation
• Four channels simultaneously detect different parameters without interference

Technical Specifications

• Total Volume: 60mL.
• Specimen Container, Leak-proof, Ideal for Pathology/Histology/Cytology reagent pre-filling sample preparation.
• Made of premium PP material, it is durable for usage.
• Some measurements can be used to not only use urine samples, it can also be used for other liquids.

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

Click Here To Download Catalogue

• Ease of use in application and maintenance
• Designed with sample and reagent ID-barcode reading, in-tip dilution reducing consumable costs
• Intuitive and highly flexible open software with complete data reduction and LIS interfaces
• Integrated PC and touchscreen eliminates the need for an external workstation
• Smart time-management allows processing up to 3 microplates simultaneously

• Photometric range: 0 to 3.0 OD
• Spectral range: 400 nm to 700 nm (up to 8 filters)
• Read time: < 15 sec single, < 30 sec dual
• Precision: 1% CV at 1.0 OD
• Accuracy: ±0.005 OD or 2.5 % (whichever is greater)
• Linearity: 0 to 2.000 OD ±1 %

• Min / max. volumes: 10 µl to 300 µl with 300 µl tip, 301 µl to 1000 µl with 1100 µl tip
• Precision (single dispense): < 3 % CV at 20 µl, < 3 % CV at 100 µl
• Precision (multi dispense): < 10 % CV at 16 x 20 µl, < 3 % CV at 8 x 100 µl
• Features: Pipetting pressure monitoring, capacitive liquid level detection, tip detection, mixing, multiple dilution steps, archiving

• Sample and reagent capacity: Up to 192 samples (Flexible: e.g. 144 samples + 8 reagents + 16 controls)

• Temperature range: Up to 45 °C
• Temperature uniformity: ±1.5 °C (with in-process temperature uniformity monitoring)
• Shaking: 20 Hz

• Precision: 10% CV at 300 µl
• Residual volume: <2.5 µl in U-bottom (mean), <4 µl in flat bottom (mean)
• Wash buffer capacity: 3 wash buffers
• Modes: Sweep mode, soak, top and bottom wash, variable pump speed

• Width x Depth x Height: 125 cm x 65 cm (without waste bag) x 75 cm with closed cover (49” x 26” x 30”)

Click Here To Download Catalogue