Anaesthesia Machine Model 50

$0.00

Shipped From Abroad

The Anesthesia Workstation Model 30 is an advanced medical device featuring precise ventilation control, integrated vaporizers, safety alarms, and a user-friendly interface for efficient anesthesia delivery in surgical environments.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Brands:: Medovo

Description

Features
  • Contains Output interface for Anesthesia information management system.
  • Complete with backup battery for working more than 120 minutes.
  • Built-in 10.4” color anesthesia ventilator

  • Traditional CO₂ absorber (autoclavable, Patent)

  • Dual high-end precise vaporizers (Volume > 280ml)

  • Three gas sources system (O₂/N₂O/Air)

  • Continuous FiO₂ monitoring & bain circuit interface

  • Electronic tidal volume (Innovation)

  • Battery backup for all systems over 60 mins

  • Optional: Backup Yoke system (O₂, N₂O)

  • Optional: Anesthesia gas scavenging system

  • Optional: Anesthesia gas modular patient monitor

  • Structure made of ABS

  • Large pressure gauges for easy reading

  • CO₂ absorber with easy changeover system

  • Optional: Yoke system for backup 1×O₂, 1×N₂O A-Type cylinder

Safety Features
  • Gases interlocking system with hypoxy guard

  • Oxygen exhaust alarm

  • Blow-off valve in top circuit

 

Technical Specification

Anaesthesia main unit

  • High resolution 10.4″ color TFT LCD screen

  • Dual-end pressure flow sensor, the unit can monitor Tidal Volume, Respiratory frequency, airway pressure, pressure-time wave, flow-time wave (two-way), High Pressure limitation, Low Pressure limitation, Apnea, Oxygen concentration under both two operating modes (Auto, Manual)

  • Respiration loop function

  • Close, semi-close, semi-open

  • Application: Adult, Pediatric

  • Low gas alarming: It gives an alarm if it lasts more than 7 seconds.

  • High pressure Limitation: Whenever airway pressure exceeds the pre-set High pressure, the ventilator offers automatic protection to ensure patient safety.

  • Low pressure protection: Once O₂ pressure is less than 0.1MPa, N₂O gas supply stops automatically.

  • Power failure alarming, power extendable function

  • O₂ flush: 25 ~ 75L/min

  • Gas Pressure:

    • O₂: 0.3 ~ 0.5MPa

    • N₂O: 0.3 ~ 0.5MPa

    • AIR: 0.3 ~ 0.5MPa

  • Power: 220V±10%, 50Hz±1%; Backup USP Battery.

  • Optional: Yoke system for backup O₂, N₂O cylinders

Flow meter

  • O₂, N₂O, AIR – six tubes (0.05 ~ 1 L/min, 1 ~ 10L/min)

  • O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

  • Adult, Pediatric bellows 1 set each

  • Pneumatic-driven electric control

  • Monitor Parameters: Tidal volume, Respiratory frequency, I:E rate, M.V., FiO₂, Apnea, Peak airway pressure, airway pressure waves (P-T, F-T) etc.

  • Working mode: Manual, Auto (IPPV, SIMV, A/C, SIGH, PCV, PSV, Demo.)

  • Tidal volume: 50 ~ 1500 mL

  • Respiratory frequency: 4 ~ 99 bpm

  • I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

  • Synchronizer trigger Pressure: -2 ~ 0 kPa

  • High pressure limitation: 2 ~ 6 kPa

  • Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

  • Consolidated compact CO₂ absorber (autoclavable).

Vaporizer

  • High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

  • Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

  • Sevoflurane adjustable range: 0.5 ~ 8% VOL

  • Automatic compensation function – flow, pressure, temperature

  • Self-lock function & inter-lock function

  • Volume: >280 ml

Reviews

There are no reviews yet.

Be the first to review “Anaesthesia Machine Model 50”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAnaesthesia Machine Model 50 removeSiare Morpheus M Anaesthetic Machine removeTimesco Jumper Fingertip Pulse Oximeter removeElastomeric Pump (Disposable Infusion Pump) with PCA removeDrip Stand removeAgary I.V. Cannula remove
NameAnaesthesia Machine Model 50 removeSiare Morpheus M Anaesthetic Machine removeTimesco Jumper Fingertip Pulse Oximeter removeElastomeric Pump (Disposable Infusion Pump) with PCA removeDrip Stand removeAgary I.V. Cannula remove
ImageFingertip Pulse Oximeter
SKUSF1033560101-2SF1033560084-2SF1033560084-18SF1033560084-67SF1033560084-221
Rating
Price

$0.00

$0.00

$17.00

$0.00

$27.00

$7.10

Stock
Availability
Add to cart

DescriptionShipped From Abroad The Anesthesia Workstation Model 30 is an advanced medical device featuring precise ventilation control, integrated vaporizers, safety alarms, and a user-friendly interface for efficient anesthesia delivery in surgical environments.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad The MORPHEUS M is an anaesthesia machine and it can be used on adult, children and newborn patients. The MORPHEUS M is suitable for administration of Oxygen – Air – Nitrous Oxide – Halothane – Enflurane – Isoflurane – Sevoflurane – Desflurane mixtures. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In Stock Integrated with SPO2 probe and processing display module. Small in volume、light in weight and convenient in carrying. Operation of the product is simple ,low power consumption. SPO2 , PR and Ridisplay,. Pulse rate value display, bar graph display. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage. Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe. Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In Stock This product make the tension of silicon capsule as the driving force to control the flow by micro porous tube, it was pre-selected by doctor base on patients'situation, and then and then handed over to the patients ' self- management “to relieve or ease the pain

Delivery & Availability:

Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In stock I.V Cannula with wings & injection port 24G/19mm, 0.70mm/20ml/min Injection port with unidirectional valve for facilitating extra medication and preventing back flow. Specially engineered recessed plug with protective ring to avoid risk of contamination. Angle & grooved wings for easy cannulation and to prevent rolling of cannula over patient body. Colour coded cap for easy identification of guage size.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • Contains Output interface for Anesthesia information management system.
  • Complete with backup battery for working more than 120 minutes.
  • Built-in 10.4” color anesthesia ventilator

  • Traditional CO₂ absorber (autoclavable, Patent)

  • Dual high-end precise vaporizers (Volume > 280ml)

  • Three gas sources system (O₂/N₂O/Air)

  • Continuous FiO₂ monitoring & bain circuit interface

  • Electronic tidal volume (Innovation)

  • Battery backup for all systems over 60 mins

  • Optional: Backup Yoke system (O₂, N₂O)

  • Optional: Anesthesia gas scavenging system

  • Optional: Anesthesia gas modular patient monitor

  • Structure made of ABS

  • Large pressure gauges for easy reading

  • CO₂ absorber with easy changeover system

  • Optional: Yoke system for backup 1×O₂, 1×N₂O A-Type cylinder

Safety Features
  • Gases interlocking system with hypoxy guard

  • Oxygen exhaust alarm

  • Blow-off valve in top circuit

 
Technical Specification

Anaesthesia main unit

  • High resolution 10.4" color TFT LCD screen

  • Dual-end pressure flow sensor, the unit can monitor Tidal Volume, Respiratory frequency, airway pressure, pressure-time wave, flow-time wave (two-way), High Pressure limitation, Low Pressure limitation, Apnea, Oxygen concentration under both two operating modes (Auto, Manual)

  • Respiration loop function

  • Close, semi-close, semi-open

  • Application: Adult, Pediatric

  • Low gas alarming: It gives an alarm if it lasts more than 7 seconds.

  • High pressure Limitation: Whenever airway pressure exceeds the pre-set High pressure, the ventilator offers automatic protection to ensure patient safety.

  • Low pressure protection: Once O₂ pressure is less than 0.1MPa, N₂O gas supply stops automatically.

  • Power failure alarming, power extendable function

  • O₂ flush: 25 ~ 75L/min

  • Gas Pressure:

    • O₂: 0.3 ~ 0.5MPa

    • N₂O: 0.3 ~ 0.5MPa

    • AIR: 0.3 ~ 0.5MPa

  • Power: 220V±10%, 50Hz±1%; Backup USP Battery.

  • Optional: Yoke system for backup O₂, N₂O cylinders

Flow meter

  • O₂, N₂O, AIR – six tubes (0.05 ~ 1 L/min, 1 ~ 10L/min)

  • O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

  • Adult, Pediatric bellows 1 set each

  • Pneumatic-driven electric control

  • Monitor Parameters: Tidal volume, Respiratory frequency, I:E rate, M.V., FiO₂, Apnea, Peak airway pressure, airway pressure waves (P-T, F-T) etc.

  • Working mode: Manual, Auto (IPPV, SIMV, A/C, SIGH, PCV, PSV, Demo.)

  • Tidal volume: 50 ~ 1500 mL

  • Respiratory frequency: 4 ~ 99 bpm

  • I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

  • Synchronizer trigger Pressure: -2 ~ 0 kPa

  • High pressure limitation: 2 ~ 6 kPa

  • Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

  • Consolidated compact CO₂ absorber (autoclavable).

Vaporizer

  • High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

  • Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

  • Sevoflurane adjustable range: 0.5 ~ 8% VOL

  • Automatic compensation function – flow, pressure, temperature

  • Self-lock function & inter-lock function

  • Volume: >280 ml

The MORPHEUS M is an anaesthesia machine and it can be used on adult, children and newborn patients. The MORPHEUS M is suitable for administration of Oxygen – Air – Nitrous Oxide – Halothane – Enflurane – Isoflurane – Sevoflurane – Desflurane mixtures. Features:
  • Mechanic gas mixing system
  • Electronic lung ventilator with 12” TFT colour display
  • Valves group: open, semi-closed, closed, heated, with soda lime absorber (1,5 Kg)
  • SIARETEX rapid connection device, Selectatec compatible for 2 vaporizers
  • Gas supply group
  • Ventilation modalities: APCV-PCV; APCV-TV; PSV; APNEA BACK-UP; VC-VAC; VC-VAC BABY; SIMV+PS (volumetric); SPONT; MANUAL.
  • Measured parameters: PAW; PEEP; Vte; ExpMV; Rate; I:E; FiO2, Pmax; Pmean; Pause; Vti; FLOWi; FLOWe; Tinsp; Tesp; Tpause; Cs; Ri
  • Displayed ventilation curves: Paw, Flow, Volume, Loop (Volume/Paw ; Volume/Flow)
  • Adjustable parameters: – O2 built-in Mixer device from 21% to 99% – I:E Adjustable Ratio: 1:1-1:2-1:3-1:4-2:1-3:1 – Inspiratory Flow – PEEP – Breathing Rate – Minute Volume; – Tidal Volume – Inspiratory Pressure Limit – Inspiratory Pause – Inspiratory Time – Trigger
  • Mechanic flowmeter module: 3-flow mechanical flow meter (O2 – N2O – AIR) with 5 flow meters for low flows. Equipped with safety systems (MIX-LIFE, CUT-OFF, flow meter protection valve).
  • Breathing system: The breathing system of Morpheus guarantees to the user an absolute flexibility and easy handling thanks to the noble construction materials employed. The valves group can be drawn-up and it’s totally autoclavable at 121°C and all its parts are manually dismountable, with no need of special tools.The breathing system is made of; Calibrated APL valve, Fresh gas collecting bag, O2 cell for reading of FiO2, Removable 1 kg soda lime canister, Manually inspectionable bellows jar, Safety valve for ambience air suction in case of fresh gas failure, Flow transducer inside the group located on the expiratory line.
Optional accessories 11054 AIRPAK 54 stand-alone medical air compressor 100150/IDF Isoflurane Vaporizer 100148/IDF Fluo-Halotane Vaporizer 100145/IDF Sevoflurane Vaporizer 100151/IDF Desflurane Vaporizer A57.049-800601 gas analysis module (5 AA – CO2 – N2O – O2 – MAC) ric.auto  
Click Here To Download Catalogue
                              )
Integrated with SPO2 probe and processing display module • Small in volume, light in weight, convenient in carrying • Simple operation, lower power consumption • OLED screen display • SPO2, PR, bar graph of pulse, plethysmogram, blood perfusion index, battery indication display • 4 directions display, 6 display models, large fonts display • Brightness control, Demo mode, Setup menu • Movement interference • Alarm function and adjustable alarm parameters • Can be connected to mobile phones through Bluetooth; can support Android and iOS client • Auto power-off when no signal after 10s • Powered by 2*AAA alkaline batteries Specification: • Size: 62 x 37 x 32mm • Peak wavelength range of the light emitted from the probe: red light 660nm±3; infrared light 905nm±5 • Maximum optical output power of the probe: 1.2mW for infrared light (905nm) • Bluetooth module: 4.0 (single-mode) • Working temperature: 5℃ to 40℃ (41°F to 104°F) • Relative humidity: 15% to 80%, non-condensing • Atmospheric pressure: 70kPa to 106kPa • Rated voltage: DC 3V Package included: • 1 x JUMPER JPD-500F Bluetooth Fingertip Pulse Oximeter • 2 x AAA Batteries • 1 x Carry Case • 1 x Lanyard • 1 x English User ManualThis product make the tension of silicon capsule as the driving force to control the flow by micro porous tube, it was pre-selected by doctor base on patients'situation, and then and then handed over to the patients ' self- management “to relieve or ease the pain Product Components: one-way valve medicated device, elastic liquid storage device, liquid medicine filter, current limiting device, automatic liquid feeding device ( CBI & PCA ), pipe and the external connector; Product Features: 1. The continued to liquid (CBI) make the drug-stored sac mechanical stretch as a driving force, limited the flow through the micro porous tube to the patient safely, effectively, slightly, continuous uniform injection of liquid to analgesic effect; extrusion pump body does not affect the liquid normal velocity; liquid filtering device which can control the particles enter the body better; 2. Continued to liquid + self control to liquid ( CBI+PCA ) make the drug-stored sac mechanical stretch as a driving force, limited the flow through the micro porous tube to the patient safely, effectively, slightly, continuous uniform injection of liquid to analgesic effect; Automatic medicated function is the patients can medicate according to pain independently. Extrusion pump body does not affect the liquid normal velocity; liquid filtering device which can control the particles enter the body better; How to use: 1. Get analgesia pump out from sterile packaging, removing the cap of medicine inlet and outlet; pour the analgesic liquid in the liquid storage device, draw out the air from the liquid storage. 2. Finish medicating, waiting for the liquid outflow from the medicine outlet; please clamp tightly to stop flowing for preparation. 3. Control keys (PCA key) is a function key to add the medicine base on continue to medicated by patients' self-controlled. So the patients can self-control the PCA key under the guidance of doctors, according to the needs while they are in treatment. At the same time, doctor should fill in PCA treatment card, so that they can analyze the condition from PCA additional times.
Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Use : Bedridden patients, Senior citizen care, Patients in coma Advantages :
  • High quality stainless steel construction
  • Properly electroplated for anti rust finish
  • Ball shaped castors for smooth movement
  • Provided with an infusion stand
  • Attached 4 pcs hook
  • Maximum load strength
  • Screw safety height adjustment
  • Light weight
   
I.V Cannula with wings & injection port 24G/19mm, 0.70mm/20ml/min Injection port with unidirectional valve for facilitating extra medication and preventing back flow. Specially engineered recessed plug with protective ring to avoid risk of contamination. Angle & grooved wings for easy cannulation and to prevent rolling of cannula over patient body. Colour coded cap for easy identification of guage size.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare