AVE-766 Urine Formed Elements Analyzer

Parameters Detected

• All types of Urine Formed Elements are classified and counted, with automatic erythrocytes morphological analysis available  and real images and statistical diagrams displayable and printable;
• It is connectable to Automatic Urine Analyzers and a comprehensive report is generated;
• Urine physical indexes are reportable;
• Extensible tests of Hydrothoax, Cerebrospinal Fluid etc. can be don as well.

Work Principle

Product Features

• Made strictly according to ISLH Recommended Reference Procedure for the Enumeration of Particles in Urine;
• Double microscope works simultaneously to improve throughput sharply up to 200 tests / hour;
• Un-centrifuged urine samples at cutoff concentration level of 3-5cell/µl are detectable;
• Automatic sampling system with liquid level detection;
• Automatic recognition, classification and quantitation of urine formed elements;
• Precise erythrocytes morphological analysis helps to determine the source of hematuria;
• Real whole view-field microscopic images of urine formed elements are presented;
• Automatic notice of verification and on-screen verification, no additional microscopic review needed;
• Characteristic parameters of urine formed elements are available for further clinical research;
• Standardized and confirmatory analysis report with both images and diagrams available;
• Self-learning ability continuously improves the recognition accuracy;
• Unique morphological quality control available;
• Unidirectional or bidirectional interface with LIS/HIS;
• Software and language upgrades by USB stick;
• Combinable with automatic urine analyzers.

Technical Parameters

• Auto-detected Urine Formed Elements: Normal red blood cells (NRBC), Abnormal red blood cells (ARBC), White blood cells (WBC), Casts (CAST), Epithelial cells( EPI), Yeast (YST), Crystals (CRYS), Mucus (MUC) and Bacteria (BAC). Further sub-classification is available with manual on-screen verification!
• Magnification: Standard 10X & 40X images
• Memory: Min. 200,000 results (including all images captured)
• Min. Sample volume: 2.0 ml
• Sample level detection: Yes
• Max. Sample loading number: 6 racks of 10 tubes
• Throughput: Up to 200 tests / hour
• Built-in Barcode reader: Yes
• Printer: Laser, external, optional
• Interfaces: USB, RS232, LAN
• Dimensions (main unit): 825 x 650 x 545mm (L x D x H)
• Weight (main unit): 79kg
• Power (main unit): 100-240V~50/60Hz, 450VA

• HbA1C
• CRP
• Lipid Panel (TC,TG, HDL, LDL#)
• Lipid Plus Panel (Glu,TC,TG, HDL, LDL#)

Main Specification

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

• Results in 20 Seconds

• 100µL sample drawn directly from primary EDTA tube

• Fully automated, walk-away operation

• Random access

• Positive patient identification via internal barcode reader

• Compatible with pediatric tube

   

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.