Blueford Split Electric Tilt Table

The Blueford Split Electric Tilt Table is designed for rehabilitation, orthopaedic recovery, and physical therapy. Its electric lift-and-tilt system allows patients to move safely from a horizontal to an upright position, supporting balance training and mobility therapy. The stable steel frame, padded surface, and wide safety straps ensure both comfort and security during treatment. With options such as adjustable footplate, foot or hand controllers, arm supports, and castor wheels, it adapts easily to different therapeutic needs and patient conditions.

Features

• Electric lift and tilt mechanism up to 90°

• Split-top design for flexible positioning

• Strong, stable steel structure

• Thick memory-foam padding

• Multiple safety straps for secure patient support

• Adjustable footboard and optional foot/hand controls

• Optional arm supports and chest pads

• Castor wheels for easy movement

• Suitable for physiotherapy, rehabilitation, neurology, and mobility training

Advantages

• Enhanced versatility for multiple treatment types

• Better patient comfort and safety

• Improved ergonomics for practitioners

• Flexible customisation as practice needs change

• Mobility and easy repositioning

3 Table-Top Models

1. Single-section / flat top

2. Multi-section top (2- or 3-section)

3. Split or divided-leg / segmented top

3 Methods of Electricity Control

1. Hand-held remote / controller

2. Foot switch/pedal

3. Base-integrated / central switch

Optional Configurations

• Adjustable footboard/footrest

• Safety harnesses/body, knee, and leg straps

• Castor wheels (lockable/retractable)

• Headrest / multi-section top

• Detachable or adjustable accessories (arm supports, chest supports, removable cushions)

• Padding options (soft or firm foam, memory foam, ergonomic face cushions)

Steps to Install Lateral Support

1. Prepare the Components

• Unpack the lateral support(s) and any included hardware: screws, bolts, washers, and mounting brackets.

• Ensure you have the correct tools (typically an Allen wrench, screwdriver, or small socket wrench).

• Clear the area around the table to avoid obstruction.

2. Identify Mounting Points

• Locate the pre-drilled holes or slots on the side of the table where the lateral supports attach.

• Some tables have adjustable height brackets; ensure you choose the correct position for your patient’s body size.

3. Attach Mounting Bracket (if separate)

• If the lateral support uses a separate bracket, align it with the pre-drilled holes.

• Secure it loosely first, using bolts/washers to allow slight adjustment.

4. Insert the Lateral Support

• Slide the lateral support rod or pad into the bracket or mount.

• Ensure it is fully seated and aligned parallel to the table.

• Check that the pad or arm is oriented correctly: the cushion should face the patient, flat side toward the table.

5. Tighten the Bolts

• Once the lateral support is in the correct position, tighten all bolts securely.

• Avoid over-tightening to prevent stripping threads or damaging the support.

6. Test Adjustability

• If the support is adjustable (height or angle), move it through its full range to ensure smooth operation.

• Confirm it locks securely at each position and doesn’t wobble.

7. Safety Check

• Press lightly on the support to verify stability.

• Make sure it doesn’t interfere with table tilt, footplates, or patient entry/exit.

• Check all bolts periodically during use, especially before sessions.

Technical Specifications

• Length: approx. 197 cm

• Width: approx. 65 cm

• Height range: approx. 47–87 cm

• Tilt angle: 0° to 90° (upright positioning)

• Footboard angle: approx. –20° to +20°

• Working / load capacity: up to 250 kg

• Upholstery: memory-foam padded surface

• Mobility: optional lockable wheels

• The cabinet is made of cold-rolled armor plate
• Upper cabinet is a mobile and adjustable partition
• The base is made of stainless steel, anti-aging, anti-rust, erosion-resistant
• Size: 960 x 400 x 1750mm
• upper part with 2 glass door with lock, opened front,inner with adjustable shelves
• lower part with a small cupboard , with lock

• Seat Height:  16.5 in. (41.91 cm.)
• Maximum Seat Height:  21.75 in. (55.25 cm.)
• Seat Diameter:  16 in. (40.64 cm.)
• Weight Capacity:  250 lbs. (113.40 kg.)

ETJ-10A Bedside Cabinet

This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Technical Specifications:

• Table top dimension: length 1900mm, width 610mm
• Min.& Max. table height: 660mm~910mm
• Trendelenburg & reverse trendelenburg: reverse trend ≥ 10°, trend ≥15°
• Back section turning: -10°~75°
• Assist platform dimension: length 550mm, width 550mm
• Arm rest swing out: ≥ 90°
• Filth basin dimension:468×338×125mm(can be equipped with soft pipe)
• Power: AC 220V 50HZ

• Waterproof cushion - 1 set
• Waist grab handle - 1 pair
• Leg holder - 1 pair
• Filth basin - 1 piece
• Arm rest - 1 pair
• Foot switch - 1 piece
• Clamp - 1 pair