KEDEE KD-RS Fully Automated Tissue Stainer

• Integrated imported high-quality LCD touchscreen with intuitive software offers clear display, prompt response, high efficiency, and simple operation
• Unique ergonomic design of the staining protocol meets different users’ needs.
• Low noise, wear-resistant flexible transmission system using imported high-quality materials and elements to ensure reliable performance
• Intelligent automatic water influx/efflux/drainage system ensures the cleanness of water used in each step and improves water efficiency
• Special staining basket allows prompt staining of dozens of slides, which is a safe, reliable and green process
• Slides are rinsed and cleaned with circulating water, and it has the drying function.
• Technical Specifications: number of Processing Cups: 14 (12 cups for reagents, the one at the 8^th station for washout, and the one at the 1^st station for drying)
• Length of Processing Time for each station: Adjustable within 0 min 0 s – 59 min 59 s for each station
• Capacity of Single Cup: 1500ml.
• Number of slides to be processed at same time: 72pcs
• Working Voltage: AC 220V±10% 50Hz (standard model); AC110V±10% 60Hz
• Power Requirements: 500W
• Dimensions: 1180×420×470 mm (W×D×H)
• Net weight: 70kg

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

• Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
• Max. speed: 14,100 x g (14,500 rpm)
• Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
• Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
• Rotor can be autoclaved at 121°C for 20 minutes
• Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
• Eliminate costly repairs with the low maintenance drive
• Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Click Here To Download Catalogue

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Total Volume: 60mL.
• Specimen Container, Leak-proof, Ideal for Pathology/Histology/Cytology reagent pre-filling sample preparation.
• Made of premium PP material, it is durable for usage.
• Some measurements can be used to not only use urine samples, it can also be used for other liquids.