Nebulizer Mask With Swivel Connector

Features

• The star lumen tubing can ensure oxygen flow even if the tube is kinked, different length of thetubing is available
• Atomization rate is about 0.4ml/min.
• Drive gas flow is about 4 to 8 L/min.
• Atomization particle
• Easy-seal, threaded cap and 6cc/8cc capacity jar.
• Anti-spill design prevents loss of medication in any position.
• Jet stays in place unless intentionally removed.
• 360 rotation connector.
• Adjustable nose clip assures comfortable fit
• The turn up rim ensure comfortable fit with good seal.

Specifications

• Measurement range: 32.0 to 43.0°C
• Accuracy: ± 0.1°C
• Sensor: Thermistor
• Readout: Three digit LCD with indication of out-of-range high or low temperature and low battery
• Sampling rate: Two per second
• Power source: Silver oxide cell type SR41W or equivalent giving 200 hours life (three years of normal use approx)
• Power switch: Manual on/off button
• Automatic switch-off: Ten minutes after last indication
• Dimensions: L130 x W18 x H9mm overall
• Probe tip diameter: 3mm
• Mass: 7g
• Supplied fitted with silver oxide cell SR41W.

• Spirometer cardboard paper mouth piece are suitable for use with the  spirometer.
• Significantly reduces the risk of cross-infection between patients.
• Essential Spirometry Consumables.
• The mouthpiece used in spirometric testing may vary from instrument to instrument.
• It is essential that the patient puts it between the teeth with the lips around it, so that the air can pass freely and the mouthpiece is sealed firmly by the lips.
• Dentures are best left in place because they provide essential support to cheeks and lips; however, if they fit poorly and obstruct airflow during the maneuvers it is better to remove them from the mouth.