PSU-100 Electrosurgical Unit

The PSU-100 Electrosurgical Unit is designed for safe and reliable surgical performance, supporting monopolar cut, blend, coagulation, and bipolar coagulation modes. Operating at 500 kHz, it provides a stable high-frequency output with adjustable power up to 100W. Its return electrode monitoring (REM) system enhances patient safety by preventing burns, while automatic power termination prevents misoperation. Compact and lightweight, the PSU-100 ensures precision, minimal tissue sticking, and reduced carbonization, making it ideal for general surgery, gynecology, and other clinical applications.

Features

• Excellent monopolar cautery machine with smart & light design.
• Max 4 work modes: Pure/Blend, Standard/Spray.
• Return electrode monitoring system to avoid any burns and damage to the patient.
• Clear working modes indication and easy power control.
• Minimal sticking & carbonization, reducing the surgery damage.
• Auto-terminate the power output after 5s to avoid misoperation.
• Different & Adjustable operation sounds in case of misoperation.
• High-frequency 500 kHz stable output
• Monopolar and bipolar modes for diverse surgical needs
• Power adjustment in fine 5W increments

Technical Specifications

• Standard Lead Wires: These are the basic cables that come with most electrotherapy units.
• Bifurcation Cables: These cables allow you to connect multiple electrodes to a single channel, effectively doubling the number of electrodes you can use.
• Extended Length Cables: These are longer cables that provide more flexibility in positioning the electrodes.

Features

• Effective smoke removal: Captures toxic gases and vapors.
• Compact and portable: Weighs 3.5 kg with a trolley cart for easy mobility.
• Quiet operation: Works at 55 dB.
• High efficiency: Processes 3.5-4.2 cubic meters of smoke per hour.
• Automatic startup: Can be activated by an internal sensor or foot switch

Features

Disposable ECG Electrodes are pre-gelled, non-sterile, single use disposable electrocardiographic electrodes which are intended for use as an accessory to ECG equipment for ECG monitoring , diagnostic procedures and can used for stress test & holter.

1. Clean the skin area where the electrode will stick on. Make sure the skin area for sticking is intact (uninjured). 2. Connect the leadwire with the electrode. Make sure it is fastened and in good contact. 3. Tear off the release film from the bottom (the part away from metal stud) of electrode. 4. Press lightly when stick the electrodes to the skin and make sure the conductive gel and adhesive backing stick on the skin tightly. Caution

• Don’t peel the release film from the metal stud of the electrode. It may break the structure and affect the function of electrodes.
• ECG electrodes should only be used by or in consultation with a healthcare provider familiar with their proper placement and use.
• ECG electrodes may damage the skin if removed carelessly.
• ECG electrodes should be applied only to intact, clean skin (e.g., not over open wounds, lesions, or infected, or inflamed areas).
• Do not reuse this device. It may cause infection and affect the performance of the reuse of this device.