| Content | Features
The Spenco RX Orthotic Arch Supports help control, stabilize, and balance the foot. The full length design provides heel to toe comfort. This insole provides firm arch support to reduce pronation and supination for improved stability. Ideal for use in casual and athletic shoes, including boots, the Spenco RX Orthotic Arch Supports come in a variety of sizes for correct arch placement to improve overall fit and comfort. Spencore material offers an cushioning layer that absorbs shock and impact while providing additional comfort. A 4-way stretch fabric with Silpure antimicrobial technology helps prevent blisters as it controls odor. Flexible plastic allows you to mold the insole to fit your foot for the perfect fit. Hand wash and air dry as needed.
- Full Length provides complete heel-to-toe comfort.
- SpenCore Material cushioning layer absorbs shock and impact to provide comfort.
- Moldable Arch Insert The flexible plastic arch insert helps support and control the foot.
- 7 Sizes for correct arch placement for better overall fit, comfort and performance.
- 4-way Stretch Fabric with Silpure Antimicrobial helps prevent blisters while controlling odor.
Specifications
| Weight |
0.4 |
| Body Part |
Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee |
| Condition |
Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain |
| Activity |
Golf, Running, Hiking, Sports, Office, Casual, Walking, Cross Training, Prolonged Standing |
| Insole Length |
Full |
| Shoe Type |
Run, Walk, Sport Specific, Work, Boots, Dress |
| Arch Type |
Medium |
| Features
Choose Total Support Original Insoles for moderate physical activities and most sports. Most rigid replacement insoles offer some motion control and stability but that where the similarity ends: Spenco Total Support Insoles feature our patented 3-POD Modulation System: By positioning pods with varying degrees of hardness beneath key areas of the foot, Total Support Insoles change the ground forces reaching the foot during activity. This tunes the ride for increased performance and superior comfort while helping to reduce overpronation, a common problem that causes foot, leg and back pain. Spenco Total Support Insoles are unconditionally guaranteed for one year. Total Support Technology aids in the relief of symptoms caused by Plantar Fasciitis.
- 3-POD System promotes healthy biomechanics, absorbs shock and provides cushioning through multi-density impact zones: - Stiffer Red POD counters over-pronation - Softer Blue PODS help guide the stride
- Semi-Rigid Stability Cradle provides advanced arch support, deep heel cupping and comfort through the stride
- Custom EVA Layer conforms with normal wear to match the contours of the foot
- Low-Friction Antimicrobial Top Cloth helps prevent blisters and control odor
- Metatarsal Arch Support offloads pressure from the ball-of-foot.
- Grooved PU Forefoot Crash Pad aligns with the metatarsal heads to provide premium cushioning and support to the ball-of-foot
- First Ray Drop Zone allows for more efficient, natural toe-off promoting a healthy stride
- Forefoot Perforations increase flexibility and airflow for lasting comfort
Specifications
| Weight |
0.4 |
| Body Part |
Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee |
| Condition |
Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain |
| Activity |
Golf, Running, Hiking, Sports, Walking, Cross Training, Prolonged Standing |
| Insole Length |
Full |
| Shoe Type |
Run, Walk, Sport Specific, Work, Boots |
| Arch Type |
High |
| Features
All the features of our Total Support in a thinner, ultra-light gel insole. TPR Gel pods and forefoot pad are perfect for low-volume or minimal running shoes. Spenco Gel Total Support Insoles feature our patented 3-POD Modulation System. By positioning pods with varying degrees of hardness beneath key areas of the foot, Spenco Gel Total Support change the ground forces reaching the foot during activity. This allows for performance and comfort, while helping to reduce over-pronation. To use Spenco Gel Total Support Insoles, carefully remove the existing shoe insole. Insert the Spenco Gel Total Support insole into the shoe. Trim the front of the insole with scissors if necessary. Hand wash and air dry as needed. Spenco Gel Total Support Insoles are guaranteed for one year.
- TPR Comfort Gel- Thermoplastic Rubber combines cushioning and energy return for comfort
- 3-POD System promotes healthy biomechanics, absorbs shock and provides cushioning through multi-density impact zones
- Metatarsal Arch Support relieves pressure from the ball of the foot
- Stability Cradle supports the arch and heel for greater comfort
Specifications
More Information
| SKU |
4630002 |
| Weight |
0.66 |
| Body Part |
Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee |
| Condition |
Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain |
| Activity |
Golf, Running, Hiking, Sports, Casual, Walking, Cross Training, Prolonged Standing |
| Insole Length |
Full |
| Shoe Type |
Run, Walk, Sport Specific, Work, Boots |
| Arch Type |
High |
|
- In order to avoid rocking and swinging movements of the lying surfaces, the therapy tables are manufactured with precision double square profiles.
- The manual height adjustment is done with a hand crank using maintenance-free gear with an optimal transmission ratio (i = 10mm/rev) for smooth, quick and easy operation, without much effort, even with heavier patients (up to 150 kg). After use, the crank handle can be pushed back under the tabletop.
- The hydraulic height adjustment is operated via the centrally built-in foot pump. The height adjustment of the therapy table can of course also be done with heavier patients (up to 150 kg) without any major effort. In order to be able to operate the hydraulics from both sides, it is possible to install an additional foot lever. This is available for an additional charge (Article No.: FPH-10).
- The electric motor height adjustment is controlled via a hand switch (alternatively - at no extra charge - via a foot switch) and can of course also be carried out with heavy patients (up to 150 kg). The electric drive used is maintenance-free and extremely quiet. The adjustment system is equipped with a key lock. Motor connection values: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
- The wide extension of the substructure, which is equipped with a mobile base on retractable castors ensures a high level of stability, even under stress load.
- With the retractable castors system, the universal therapy table is lifted onto castors (Ø 75 mm) using foot control or lowered onto feet for standing.
- The thickness of the seven upholstery segments (armrests, head, back, seat and leg sections) is 64 mm each.
|
Therapy tables AGA-THERA |
| Article number |
TH-1065/H |
TH-1065/Y |
TH-1065/E |
| Frame |
Lacquered |
| Length
Head/back/seat/foot sections |
1,920 mm
430 / 515 / 455 / 505 mm |
| Width |
620 mm |
| Height adjustment |
650 - 850 mm
(hand crank) |
650 - 850 mm
(hydraulics) |
650 - 850 mm
(electric motor) |
| Upholstery segments |
7 sections |
| Upholstrey thickness |
64 mm |
| Head section adjustment |
+20° (grid) |
| Armrests |
-140 mm (clamping) |
| Seat/backrest adjustments |
+/-20° (gas pressure spring) |
| Leg section adjustments |
+/-30° (clamping rods) |
| Trendelenburg adjustment |
20° (gas pressure spring) |
| Anti-Trendelenburg adjustment |
20° (gas pressure spring) |
| Load capacity |
150 kg |
The standard configuration includes:
- Mobile base on retractable castors, swivel castors Ø 75 mm.
- Floor protectors (clip-on caps) on the four adjustable feet.
Accessories & additional options
| Article No. |
Description |
| FPH-10 |
Foot pedal, with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides. |
| HRM-14 |
Semi-circular roll, foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours. |
| KKM-16 |
Head wedge, foam filling, dimensions 450 x 400 x 80 / 10 mm (L x W x H), sewn from synthetic leather, with zipper, see upholstery colours. |
| RLM-20
RM-12 |
Knee roll, dimensions Ø 180 x 560 mm.
Neck roll, dimensions Ø 140 x 400 mm.
Round roll, foam filling, sewn from synthetic leather, with zipper. |
|
- The therapy tilt tables can be adjusted by electric motors from the vertical position (90°) to the horizontal position (0°). The tilting is controlled using a hand switch (alternatively, at no extra charge, with a foot switch).
- The electromotive height adjustment (520 – 960 mm, measured in the horizontal upholstery position) is controlled via a foot switch (alternatively, at no extra charge, via a hand switch).
- The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
- The wide support frame, which is equipped with a mobile base on retractable castors, ensures a high level of stability, even under stress.
- The mobile base on retractable castors, swivel castors Ø 75 mm, locked in place using pedals are by pedals at the head and foot ends (step twice).
- The thickness of the two upholstered segments (headrest and main surface) on the tilt tables are:
- Article No.: KT-1080/EE, each 64 mm,
- Article No.: KT-10100/EE, each 67 mm.
- The headrest can adjusted up to +35° using a grid with 13 locking steps.
|
Therapy tilt tables |
| Article number |
KT-1080/EE |
KT-10100/EE |
| Frame |
Lacquered |
| LengthHeadrest/main section |
1,900 mm
500 / 1,400 mm |
| Width |
800 mm
(860 mm with standard rails) |
1,000 mm
(1,060 mm with standard rails) |
| Height adjustment |
520 - 960 mm (electric motor) |
| Tilt adjustment |
0º / +90º (electric motor) |
| Upholstery segments |
2 sections |
| Upholstery thickness |
64 mm |
67 mm |
| Headrest adjustment |
+35°(grid) |
| Load capacity |
130 kg |
The standard configuration includes:
- A pair of side-mounted surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 1,560 mm.
- A removable footboard, dimensions 800 / 1,000 x 320 mm (W x D), frame plastic-coated, tread covered with synthetic leather.
- The hand and foot switches.
- A cutout at the foot of the main section to make getting on and off easier.
- Substructure as a mobile base on retractable castors, swivel castors Ø 75 mm.
- Floor protectors (clip-on caps) on the four adjustable feet.
- An integrated protractor.
Accessories & additional options
| Article No. |
Description |
| A-2047 |
Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail. |
| P-2080/A
P-20100/A |
Paper roll holder, for table width 800 mm.
Paper roll holder, for table width 1,000 mm.
With mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder rod (length 795 / 995 mm, Ø 20 x 1 mm), for mounting on the upholstery frame. |
| PG-260 |
Patient belt, dimensions 2,600 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps)
|
|
The Bobath gymnastics tables are an aid in the “Bobath concept”, which is used successfully worldwide and is used to rehabilitate people with diseases of the central nervous system. These are often accompanied by movement disorders, symptoms of paralysis and spasticity. A special table makes the treatments and therapeutic measures easier.
In order to simplify these individual and everyday therapeutic activities for patients and users, the Bobath tables from AGA Sanitätsartikel are all equipped with a height adjustment mechanism as follows:
- Manual (hand crank), Article No.: H-Bobath/H 110,
- Hydraulics, Article No.: H-Bobath/Y 110, H-Bobath/Y 120 and H-Bobath/Y 160,
- Electric motor, Article No.: H-Bobath/E 110, H-Bobath/E 120 and H-Bobath/E 160.
In addition, the Bobath gymnastics tables are available in three widths, 1,040 mm, 1,200 mm and 1,600 mm.
Features
- In order to avoid rocking and swinging movements of the lying surface, the gymnastics tables are manufactured with a 200 mm stroke and precision double square profiles.
- The Bobath tables with scissor adjustment mechanisms are characterized by the large adjustment range (420 mm) and the resulting low entry height (525 mm).
- The manual height adjustment is done with a hand crank using maintenance-free gear with an optimal transmission ratio (i = 10mm/rev) for smooth, quick and easy operation, without much effort, even with heavier patients (up to 200 kg). After use, the crank handle can be pushed back under the tabletop.
- The hydraulic height adjustment is operated via the built-in foot pump. The height adjustment can of course also be carried out with heavier patients (up to 200 kg) without any major effort. In order to be able to operate the hydraulics from both sides, it is possible to install an additional foot lever. This is available for an additional charge (Article No.: FPH-10).
- The electric motor height adjustment is controlled via a foot switch (alternatively - at no extra charge - via a hand switch) and can of course also be done with heavier patients (up to 200 kg). The electric drive used is maintenance-free and extremely quiet. The adjustment system is equipped with a key lock. Motor connection values: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
- The stability and robustness is achieved by the gusset plates in the frame corners.
- The 70 mm thick, one-piece and continuous comfort padding offers the patient a high level of comfort. As standard, it is equipped with 2-layer foam cuts with different thicknesses in terms of density - which also enclose the wooden support panel on the side (20 mm thick) - and is covered with high-quality synthetic leather.
- The 1,600 mm wide Bobath gymnastics have a seam in the middle of the upholstered cover.
|
Bobath tables with precision double square profiles |
| Article number |
H-Bobath/H 110 |
H-Bobath/Y 110 |
H-Bobath/E 110 |
| Frame |
Lacquered |
| Length |
1,940 mm |
| Width |
1,040 mm |
| Height adjustment |
650 - 850 mm
(hand crank) |
650 - 850 mm
(hydraulics) |
650 - 850 mm
(electric motor) |
| Upholstery segments |
1 section |
| Upholstery thickness |
70 mm |
| Load capacity |
200 kg |
|
Bobath tables with scissor adjustments |
| Article number |
H-Bobath/Y 120 |
H-Bobath/Y 160 |
H-Bobath/E 120 |
H-Bobath/E 160 |
| Frame |
Lacquered |
| Length |
1,940 mm |
| Width |
1,200 mm |
1,600 mm |
1,200 mm |
1,600 mm |
| Height adjustment |
525 – 945 mm
(hydraulics) |
525 – 945 mm
(electric motor) |
| Upholstery segments |
1 section |
| Upholstery thickness |
70 mm |
| Load capacity |
200 kg |
The standard configuration includes:
- Levelling feet on the chrome-plated crossbars of the Bobath tables with precision double square profiles.
- Floor protectors (clip-on caps) on the four adjustable feet of the Bobath tables with scissor adjustments.
Accessories & additional options
| Article No. |
Description |
| FPH-10 |
Foot pedal, with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides. |
| HRM-14 |
Semi-circular roll, foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours. |
| KKM-16 |
Head wedge, foam filling, dimensions 450 x 400 x 80 / 10 mm (L x W x H), sewn from synthetic leather, with zipper, see upholstery colours. |
| LR/Z-125 |
Central locking castor system, double swivel castors Ø 125 mm, all four castors offer excellent rolling properties and are connected to each other by rods, foot pedals are arranged diagonally at the head and foot end, easy to operate and with coloured markings (green = table ready for moving, red = table locked in place). Retrofitting is not possible. |
| RLM-20
RM-12 |
Knee roll, dimensions Ø 180 x 560 mm.
Neck roll, dimensions Ø 140 x 400 mm.
Round roll, foam filling, sewn from synthetic leather, with zipper, see upholstery colours. |
|
Reviews
There are no reviews yet.