Sidestream Multigas Module AneSure-S

Brands: Kingst

~~$0.00~~

Shipped From Abroad

Side stream Anesthesia Multi-Gas sensor can simultaneously measure the concentration waveform and data of CO2, N2O, anesthetic gases, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane, and desflurane. The user can manually select the type of anesthetic gas.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Brands:: Kingst

Description
Reviews (0)

Description

Features of Anesthesia Multi-gas Detector AneSure™-S

Reliable multi-gas OEM solution

Reliable multi-gas OEM solution. Equipped With Oxygen Battery. Compatible with a variety of protocols, so that your products can be quickly upgraded and assembled.

Side Stream Mode

Can simultaneously measure the concentration waveform and data of CO2, N2O， Anesthetic gas, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane, and desflurane. The user can manually select the type of anesthetic gas.

Plug And Play

The host does not need an internal circuit, just a serial port. The sampling pump with super long service life can measure data within 4 seconds after power on. Suitable for adults, children and newborns. Advanced filter, can also be used in heavy humidity environment for a long time, reducing the cost of use.

Automatic Pressure Compensation

There is a built-in atmospheric pressure sensor, which is suitable for various altitude ranges.

High-precision

Careful selection of infrared devices, hardware design, and software algorithm, to achieve a high signal-to-noise ratio, to ensure the measurement accuracy for a temperature range of – 5-50 °C and in the range of 0 – 20%.

Specifications of Anesthesia Multi-gas Detector AneSure-S

Working condition	5°C to 50°C, 10 to 90% RH, non-condensing
Circumstance pressure	55-115kpa
Power consumption	＜180 mA
Interface	RS-232/Standard E-8-1, 38.4 kBaud,10 ms data interval (KM) or customization
EtCO2, FiCO2 measurement	Range:0-150 mmHg, 0-20 kPa, 0-19.7% Accuracy:±2mmHg for CO2 range 0 – 40mmHg ±5% for CO2 range from 41 – 70mmHg ±8% for CO2 range from 71 – 100mmHg ±10% Over 100mmHg
Respiration rate	Range: 3-150 BPM Accuracy: ±1% of reading or ±1 rpm whichever is greater
FiN2O, EtN2O measurement	Range: 0-100% Accuracy: ± (2 vol% + 2% of reading
FiHAL/EtHAL, FiENF/EtENF, FiISO/EtISO measurement	Range: 0-12% Accuracy: 0-8%: ± (0.15 vol% + 5% of reading) 8-12%: unspecified
FiSEV, EtSEV measurement	Range: 0-15% Accuracy: 0-10%: ± (0.15 vol% + 5% of reading) 10-15%: unspecified
FiDES, EtDES measurement	Range:0-25% Accuracy: 0-18%: ± (0.15 vol% + 5% of reading) 18-25%: unspecified
Gas compensation	O2 (HOST supplied), or automatic compensation if O2 equipped
Barometric Pressure	Having a barometric pressure sensor and automatic compensation
Warm-up time	10 seconds reach the designed deviation of 97%, 20 seconds reach the designed deviation.
Rise times (t10- 90 %)	CO2：<200ms N2O, AGENT: <300ms
Flow control	Range: 50-250ml/min adjustable Accuracy: <±20%
Calibration	No need to calibrate
Zero	Implement when the gas value’s offset is observed, or when any unspecified accuracy message is displayed

Application Scenarios of Anesthesia Multi-gas Detector AneSure™-S

Reliable multi-gas OEM solution. Equipped with Oxygen battery. Compatible with a variety of protocols, so that your products can be quickly upgraded and assembled.
Side stream mode can simultaneously measure the concentration waveform and data of CO2, N2O anesthetic gas, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane, and desflurane. The user can manually select the type of anesthetic gas.
Plug and play, the host does not need an internal circuit, just a serial port. The sampling pump with super long service life can measure data within 4 seconds after power on. Suitable for adults, children, and newborns. Advanced filters, can also be used in heavy humidity environments for a long time, reducing the cost of use.
There is a built-in atmospheric pressure sensor, which is suitable for various altitude ranges.
High-precision. Careful selection of infrared devices, hardware design, and software algorithm, to achieve a high signal-to-noise ratio, to ensure measurement accuracy for a temperature range of – 5-50 °C and in the range of 0 – 20%.

Reviews

There are no reviews yet.

Be the first to review “Sidestream Multigas Module AneSure-S”

Quick Comparison

Settings Sidestream Multigas Module AneSure-S remove Render SD-M2000C+ Anesthetic Machine remove MediPlus Bain Circuit (Adult) remove Hersill Genesis Anaesthetic Machine remove Anesthetic Face Mask remove Spinal Epidural Pack remove

Name Sidestream Multigas Module AneSure-S remove Render SD-M2000C+ Anesthetic Machine remove MediPlus Bain Circuit (Adult) remove Hersill Genesis Anaesthetic Machine remove Anesthetic Face Mask remove Spinal Epidural Pack remove

Image

SKU SF1033560011-11 SF1033560084-21 SF1033560450-1 SF1033560084-141 SF1033560084-25

Rating

Price

~~$0.00~~

$4,070.00

$28.00

~~$0.00~~

$8.00

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad Side stream Anesthesia Multi-Gas sensor can simultaneously measure the concentration waveform and data of CO2, N2O, anesthetic gases, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane, and desflurane. The user can manually select the type of anesthetic gas.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad

5.5" monochrome TFT LCD screen
Built in Anesthesia ventilator
Updated 2 high precise vaporizers ZF-3000 (Volume > 250ml)
Updated high brightness LED lamp
Compact CO2 absorber (autoclavable)
Optional: Continuous FIO2 monitoring
Optional: Anaesthesia gas scavenging system
Optional: Yoke system for 5L O2/N2O cylinders
Optional: Integrated suction unit on air

Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In Stock

Provided with 22mm Corrugated tube of length 1.6m
APL Valve
2 L Antistatic Rebreathing bag
6mm Green PVC tube of length 1.6m

Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad The Genesis anaesthesia workstations meet your most ambitious requirements. They stand out for their lung protective ventilation. Application Field: Neonates, Pediatrics & Adults Ventilation Modes: Volume controlled (VC), Pressure controlled (PC), Adaptive Pressure with Volume Guaranteed (APVG) & Pressure Support Ventilation (PSV) Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock Four sizes from small adult to extra large adult. A range of color-coded economy anesthetic face masks for single patient use to prevent the possibility of cross infection.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In Stock It is for performing spinal/epidural or combined spinal/epidural or never-block loco-regional anaesthesia on patinet in clinical surgery.

Delivery & Availability:

Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Features of Anesthesia Multi-gas Detector AneSure™-S

Reliable multi-gas OEM solution

Reliable multi-gas OEM solution. Equipped With Oxygen Battery. Compatible with a variety of protocols, so that your products can be quickly upgraded and assembled.

Side Stream Mode

Plug And Play

Automatic Pressure Compensation

There is a built-in atmospheric pressure sensor, which is suitable for various altitude ranges.

High-precision

Specifications of Anesthesia Multi-gas Detector AneSure-S

Working condition	5°C to 50°C, 10 to 90% RH, non-condensing
Circumstance pressure	55-115kpa
Power consumption	＜180 mA
Interface	RS-232/Standard E-8-1, 38.4 kBaud,10 ms data interval (KM) or customization
EtCO2, FiCO2 measurement	Range:0-150 mmHg, 0-20 kPa, 0-19.7% Accuracy:±2mmHg for CO2 range 0 - 40mmHg ±5% for CO2 range from 41 - 70mmHg ±8% for CO2 range from 71 - 100mmHg ±10% Over 100mmHg
Respiration rate	Range: 3-150 BPM Accuracy: ±1% of reading or ±1 rpm whichever is greater
FiN2O, EtN2O measurement	Range: 0-100% Accuracy: ± (2 vol% + 2% of reading
FiHAL/EtHAL, FiENF/EtENF, FiISO/EtISO measurement	Range: 0-12% Accuracy: 0-8%: ± (0.15 vol% + 5% of reading) 8-12%: unspecified
FiSEV, EtSEV measurement	Range: 0-15% Accuracy: 0-10%: ± (0.15 vol% + 5% of reading) 10-15%: unspecified
FiDES, EtDES measurement	Range:0-25% Accuracy: 0-18%: ± (0.15 vol% + 5% of reading) 18-25%: unspecified
Gas compensation	O2 (HOST supplied), or automatic compensation if O2 equipped
Barometric Pressure	Having a barometric pressure sensor and automatic compensation
Warm-up time	10 seconds reach the designed deviation of 97%, 20 seconds reach the designed deviation.
Rise times (t10- 90 %)	CO2：<200ms N2O, AGENT: <300ms
Flow control	Range: 50-250ml/min adjustable Accuracy: <±20%
Calibration	No need to calibrate
Zero	Implement when the gas value's offset is observed, or when any unspecified accuracy message is displayed

Application Scenarios of Anesthesia Multi-gas Detector AneSure™-S

Reliable multi-gas OEM solution. Equipped with Oxygen battery. Compatible with a variety of protocols, so that your products can be quickly upgraded and assembled.
Side stream mode can simultaneously measure the concentration waveform and data of CO2, N2O anesthetic gas, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane, and desflurane. The user can manually select the type of anesthetic gas.
Plug and play, the host does not need an internal circuit, just a serial port. The sampling pump with super long service life can measure data within 4 seconds after power on. Suitable for adults, children, and newborns. Advanced filters, can also be used in heavy humidity environments for a long time, reducing the cost of use.
There is a built-in atmospheric pressure sensor, which is suitable for various altitude ranges.
High-precision. Careful selection of infrared devices, hardware design, and software algorithm, to achieve a high signal-to-noise ratio, to ensure measurement accuracy for a temperature range of - 5-50 °C and in the range of 0 - 20%.

5.5" monochrome TFT LCD screen
Built in Anesthesia ventilator
Updated 2 high precise vaporizers ZF-3000 (Volume > 250ml)
Updated high brightness LED lamp
Compact CO2 absorber (autoclavable)
Optional: Continuous FIO2 monitoring
Optional: Anaesthesia gas scavenging system
Optional: Yoke system for 5L O2/N2O cylinders
Optional: Integrated suction unit on air

Click Here To Download Catalogue

Provided with 22mm Corrugated tube of length 1.6m
APL Valve
2 L Antistatic Rebreathing bag
6mm Green PVC tube of length 1.6m

The Genesis anaesthesia workstations meet your most ambitious requirements. They stand out for their lung protective ventilation, accuracy and performance, cost saving, design and ergonomics, safety and versatility. TECHNICAL SPECIFICATION OPERATING DATA

Weight - 105 kg
Dimensions - 92 cm Wide x 68 cm Deep x 139 cm High (93 cm to the table surface)
Packaging Dimensions - 105 cm Wide x 75 cm Deep x 160 cm High
Operating voltage supply - 110 to 240 V~, 47 to 63 Hz (12 to 6 A)
Power input - 120 W typically (max. 1.2 kW with auxiliary outlets used)
Battery autonomy - 90 min typically
Auxiliary power outlets - 4, with automatic protection
O₂, N₂O and Air supply - 2.7 to 6.9 bar (39.1 to 100 psi)
Screen - TFT 18.5" (47 cm) projected capacitive touchscreen
Protection class - Class I, gas analyser type BF defibrillation proof
Classification - Class II b
Storage - One front drawer with self-brake system and two back cabinets with door
Lighting - LED bar below the screen controlled from the touchscreen
Auxiliary integrated systems - Auxiliary 02 flow meter (0-15 L/min), Auxiliary 02 suppy valve (NF standard) and Suction device
Communication ports - 1 x RS-232, 2 x USB, 1 x LAN Ethernet

Fresh Gases (02, N20 and Air, electronically controlled)

Fresh gas flow - 0 and 0.1 to 18 L/min 02/N20/Air
Accuracy - 0.1 to 0.5 L/min = ±0.05 L/min; 0.5 to 18 L/min = ±10 %
02 concentration - 21 to 100% vol. with Air, 25 to 100% with N20 (minimum 200 ml/min 02)
02 Safety fresh gas (backup) - 0-0.2-0.4-0.7-1-1.5- 2- 3- 4- 6- 8-10-12-15 L/min 02
02 flush (+02) - 40 L/min standard (adjustable 25 - 75 L/min upon requirement)

Breathing System (CABS)

Autoclavable - 134 °C
Weight of breathing system - 9.8 kg
C02 absorber volume - 1.5 L
Leakage - < 150 mL/min (at 30 hPa)
Pressure limiting valve APL - 0 to 70 hPa
Pressure relief valve - 125 hPa
Vacuum safety valve - 0.3 hPa
resistance at 60L/min - 5.80 hPa
resistance at 60L/min - 2.90 hPa
resistance at 30L/min - 3.55 hPa
resistance at 30L/min - 0.89 hPa
Internal Compliance at 30 hPa - 15 mL

VENTILATOR Operation / Ventilation Modes Volume controlled (VC) modes:

Volume Controlled Ventilation (VCV)
VC Synchronized Intermittent Mandatory Ventilation (VC-SIMV)
VC-SIMV with Pressure Support (VC-SIMV-PS) *

Pressure controlled (PC) modes:

Pressure Controlled Ventilation (PCV)
PC Synchronized Intermittent Mandatory (PC-SIMV)
PC-SIMV with Pressure Support (PC-SIMV-PS) *

Adaptive Pressure with Volume Guaranteed (APVG) modes (other trade names: Autoflow,PCVR, PRVC, AVAPS, VC+)

Adaptive Pressure with Volume Guaranteed (APVG) *
APVG Synchronized Intermittent Mandatory (APVG-SIMV) *
APVG -SIMV with Pressure Support (APVG-SIMV-PS) *

Pressure Support Ventilation (PSV) *

(other trade names: PS, ASB, SPS, IPS)

Non-mechanical Operation / Ventilation Modes

Manual ventilation through the CABS system (Auto/Manual software controlled)
Spontaneous ventilation either through the bellows (auto mode) or through the bag
(manual mode) Manual ventilation through the external fresh gas outlet for non-rebreathing systems (Bain, Mapleson, ...)

Application field: Neonates, Pediatrics & Adults

Tidal volume - 5 to 1500 mL
Inspiratory pressure - 0 to 68 hPa
Ventilation frequency - 3 to 120/min
Inspiratory time - 0.05 to 16.6s
l:E ratio - 5:1 to 1:8
Inspiratory pause - 0 to 60%
Inspiratory flow - max. 150 L/min
PEEP - 0 to 30 hPa
Flow trigger - 0.2 to 15 L/min
Pressure support - 5 to 50 hPa
Ramp time - 0.1 to 2 s
Maximum pressure - 0 to 68 hPa

MONITORING

5" (47 cm) projected capacitive touchscreen, supported on a 360° rotating and 2 axis tilting arm.
Measurements displayed: Peak pressure; Plateau pressure; Mean pressure; Expiratory minute ventilation; Expiratory tidal volume; Inspiratory tidal volume; Expiratory volumeter; Breathing rate; Compliance and Resistance (in VC modes); Patient info (age, weight, MAC, Class ASA); Connected sensors; Battery status; Power supply status; Gases supply pressures for 02, N20 and Air; Inspiratory and expiratory concentration of 02, N20, C02 and Anaesthetic gas*
Parametres charted as curves (up to 3 simultaneously): Airway pressure; Expiratory flow; Inspiratory flow; Volume; Fresh gases (Rotstyle); Concentration of 02, N20, C02 and Anaesthetic gas*; Trends: Minute volume, MAC and gases (02, N20, C02 and Anaesthetic gas).
Display for the performance of the hospital Anaesthetic Gas Scavenging System (AGSS).
Configurable interface: bright/dark, multi-language.
Loops (up to 2 simultaneously): Volume-Pressure, Flow-Volume, Pressure-Flow, C02-Volume.
Fresh gas virtual rotameters for 02, N20, Air. * C02, N20 and Anaesthetic gas monitoring with the accessory multigas analyzer main-stream or side-stream; 02 real-time monitoring via paramagnetic

Click Here To Download Catalogue

Four sizes from small adult to extra large adult. A range of color-coded economy anesthetic face masks for single patient use to prevent the possibility of cross infection. Features: