STERIPLUS 40

$0.00

Shipped From Abroad

INTEGRATED INFECTIOUS WASTE PRE-SHREDDING AND STEAM STERILIZATION SYSTEM

Tesalys STERIPLUS ™ systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED ™ shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at heart.

Click here to download Catalogue

Delivery & Availability:

Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF103356013097-2
Brands:: Tesalys

Description

STERIPLUS  40
On-site infectious risk waste treatment solution

Features

Easy handling

The STERIPLUS™ 40 has a very ergonomic design, for easy handling and use, within everyone’s reach.

Quick installation

It is easy to install and can be quickly deployed on site.

Efficient and fast

The STERIPLUS™ 40 enables rapid on-site processing, with cycles of 30 to 50 minutes, eliminating storage issues.

Technical Data
LOADING CHAMBER CAPACITY 40 L
LOADING CHAMBER USEFUL DIMENSIONS (W x D x H) 320 x 247 x 520 mm
LOADING CAPACITY (containers) 1 X TESABOX  40 or 2 X TESABOX  20
TOTAL CYCLE TIME (NF X30-503-1 standard) (1) 30 to 35 min
TOTAL CYCLE TIME in working conditions (2) 30 to 50 min.
LOADING CAPACITY (KG/CYCLE) 3,2 to 4,8 kg/cycle – Based on an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 4,8 to 8 kg/cycle – Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste
TREATMENT CAPACITY (KG/H) (3) 4 to 6 kg/h – Based on an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 6 to 10 kg/h – Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste
MAX QUANTITY OF LIQUID RECOMMENDED PER CYCLE (4) 12 L
EXTERNAL DIMENSIONS (w x d x h) 1300 x 895 x 1450 mm
NET WEIGHT 580 kg
LOADING CHAMBER Stainless steel with PTFE coating
TREATMENT CHAMBER AISI 304L stainless steel
STEAM GENERATOR AISI 304L stainless steel (chamber) & Highly corrosion-resistant Hastelloy®
WATER SOFTENER Built-in
WATER BOOSTER PUMP AND AIR COMPRESSOR Built-in
WASTER SHREDDER Structure: AISI 304L stainless steel & Blades: High-strength steel
PIPING Stainless steel/PTFE flexible hosing
CHASSIS Painted steel
BODYWORK Composite material / Painted steel
CYCLE TRACEABILITY – THROUGH PRINTOUT Built-in
USB PORT Built-in
Use Data
WATER
Requirements Softened water (4-8°TH)
Consumption 10 liters / cycle
ELECTRICITY
Requirements 380-400 V III N, 50Hz/60Hz, 15 kW
Consumption 1,5 kW/h / cycle
DRAIN ø 32 mm internal (heat-resistant)
STEAM/COMPRESSED AIR Produced by the integrated steam generator and air compressor; no external connection required.
Accessories

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reviews

There are no reviews yet.

Be the first to review “STERIPLUS 40”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSTERIPLUS 40 removeADE M501660 Wheelchair Scale removeKeewell Gel Warmer KGW-2 removeIBIS Neeo R9 Digital Surgical C-Arm removeKeewell FT-1800 Blood & Infusion Warmer removeGenoray ZEN-7000 Surgical Mobile C-Arm remove
NameSTERIPLUS 40 removeADE M501660 Wheelchair Scale removeKeewell Gel Warmer KGW-2 removeIBIS Neeo R9 Digital Surgical C-Arm removeKeewell FT-1800 Blood & Infusion Warmer removeGenoray ZEN-7000 Surgical Mobile C-Arm remove
ImageIBIS Neeo R9 Digital Surgical C-Arm
SKUSF103356013097-2SF1033560099SF1033560086SF1033560011-1SF1033560076SF1033560088
Rating
Price

$0.00

$0.00

$175.00

$0.00

$781.00

$0.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad
INTEGRATED INFECTIOUS WASTE PRE-SHREDDING AND STEAM STERILIZATION SYSTEM
Tesalys STERIPLUS ™ systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED ™ shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at heart.
Click here to download Catalogue
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Electronic wheelchair scale with integrated ramps on both sides. Two handgrips and transport castors allow an easy handling of the scale. The all steel construction provides extra stability and takes weight up to 300 kg. Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
A typical complaint in ultrasound procedures is the cold ultrasound gel. This device can safely heat the ultrasound gel to the body temperature. By this way it can remove the uncomfortable cold feeling of the patients, help the patients more relaxation to the diagnosis. At the same time, it can also improve the performance of the ultrasound gel, increase the image and signal quality. Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad Our Neeo “C” arms are easy to place, use and are specifically designed to be used in orthopedics, traumatology, abdominal surgery, urology, cardiology and operating rooms. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped From Abroad
Safety system:
Permanent running self-tests, 24 hours continuous operating Double independent over-heating protections and automatic cut off Visual and acoustic alarm for high temperature / low temperature/sensor fault
Advance Dry Heating Technology:
Quick Warming up and effective heating 
Heating up to the patient: 
IV tube is completely wrapped in, no heat loss
User friendly interface:
Big LED screen showing set temp., actual temp., heating time and fault situation
  Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Fluoroscopy Powerful, Light and Versatile Performance with the 9″ high-resolution image intensifier and million pixel (1K x 1K) high-definition camera, the Zen-7000 supports clear images without distortion to provide the best diagnostic imaging environment possible. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
STERIPLUS  40
On-site infectious risk waste treatment solution
https://youtu.be/ahPvNNrzIMk?si=wKjqSCpjrLN8JjvQ
Features

Easy handling

The STERIPLUS™ 40 has a very ergonomic design, for easy handling and use, within everyone's reach.

Quick installation

It is easy to install and can be quickly deployed on site.

Efficient and fast

The STERIPLUS™ 40 enables rapid on-site processing, with cycles of 30 to 50 minutes, eliminating storage issues.
Technical Data
LOADING CHAMBER CAPACITY 40 L
LOADING CHAMBER USEFUL DIMENSIONS (W x D x H) 320 x 247 x 520 mm
LOADING CAPACITY (containers) 1 X TESABOX  40 or 2 X TESABOX  20
TOTAL CYCLE TIME (NF X30-503-1 standard) (1) 30 to 35 min
TOTAL CYCLE TIME in working conditions (2) 30 to 50 min.
LOADING CAPACITY (KG/CYCLE) 3,2 to 4,8 kg/cycle - Based on an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 4,8 to 8 kg/cycle - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste
TREATMENT CAPACITY (KG/H) (3) 4 to 6 kg/h - Based on an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 6 to 10 kg/h - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste
MAX QUANTITY OF LIQUID RECOMMENDED PER CYCLE (4) 12 L
EXTERNAL DIMENSIONS (w x d x h) 1300 x 895 x 1450 mm
NET WEIGHT 580 kg
LOADING CHAMBER Stainless steel with PTFE coating
TREATMENT CHAMBER AISI 304L stainless steel
STEAM GENERATOR AISI 304L stainless steel (chamber) & Highly corrosion-resistant Hastelloy®
WATER SOFTENER Built-in
WATER BOOSTER PUMP AND AIR COMPRESSOR Built-in
WASTER SHREDDER Structure: AISI 304L stainless steel & Blades: High-strength steel
PIPING Stainless steel/PTFE flexible hosing
CHASSIS Painted steel
BODYWORK Composite material / Painted steel
CYCLE TRACEABILITY - THROUGH PRINTOUT Built-in
USB PORT Built-in
Use Data
WATER
Requirements Softened water (4-8°TH)
Consumption 10 liters / cycle
ELECTRICITY
Requirements 380-400 V III N, 50Hz/60Hz, 15 kW
Consumption 1,5 kW/h / cycle
DRAIN ø 32 mm internal (heat-resistant)
STEAM/COMPRESSED AIR Produced by the integrated steam generator and air compressor; no external connection required.
Accessories
                                                   
Electronic wheelchair scale with integrated ramps on both sides. Two handgrips and transport castors allow an easy handling of the scale. The all steel construction provides extra stability and takes weight up to 300 kg. Features:
  • Unit switch kg/lbs
  • Automatic zero setting
  • Tare
  • Pre-tare
  • Hold function
  • BMI function
  • Low battery indication
  • Auto switch off
  • RS232 interface
  • Power supply: Mains and rechargeable batteries
Technical Specification:
Capacity
300 kg
Graduation
100 g
Units
kg, lbs
Dimensions weighing platform
800 x 800 mm
Dimensions overall
1070 x 1050 x 70 mm
Weight 45 kg
  A typical complaint in ultrasound procedures is the cold ultrasound gel. This device can safely heat the ultrasound gel to the body temperature. By this way it can remove the uncomfortable cold feeling of the patients, help the patients more relaxation to the diagnosis. At the same time, it can also improve the performance of the ultrasound gel, increase the image and signal quality. FEATURES: High bright LED display Adjustable temperature control range 34-40℃ Programmable timer to switch on and switch off 360 degree surround heater unit Digital temperature control technology High energy efficiency Ergonomic design Built-in durable waIl mountable construction STANDARDS CONFORMED TO: EN 55014-1: 2006+A1:2009 EN 55014-2: 1997+A2:2008 EN 61000-3-2: 2006+A2:2009 EN 61000-3-3: 2008 EN 60335-1: 2002+A1:2004+A11:2004+A12:2006+A2:2006+A13:2008+A14:2010 EN 62233:2008 SPECIFICATIONS: Power Supply:  AC100-240V, 50/60Hz, 30VA; DC12V, 2A Operating Ambient Temperature:  0-40℃ Operating Relative Humidity:  30-90% Temperature Control Range:  34-40℃ Temperature Control Accuracy:  ± 1℃ (After Heat Balance) Auto Switch On Timer:  00:00-23:59 Auto Switch Off Timer:  00:00-23:59Our Neeo “C” arms are easy to place, use and are specifically designed to be used in orthopedics, traumatology, abdominal surgery, urology, cardiology and operating rooms. Using Neeo with the RTP (Real Time Processing) option it is possible to perform vascular, urological and cardiological diagnostics. One of the main functions, digital image subtraction, allows to see, as an example, the passage of contrast liquids in a tissue or in a venous or arterial duct; thanks to the possibility of looping, the acquired video can be reproduced several times to monitor more accurately the passage of the fluid within the area in question. Angiographic measurement is another useful function in the vascular field (QA Quantitative Angiography) that allows the measurement of stenoses. Finally, fluoroscopy allows the correct positioning of stents or expanders. Neeo is used in various interventional and diagnostic procedures in traumatology and orthopedics wards and operating rooms as well. Thanks to low-dose fluoroscopy, it is possible to use the device for positioning bone or subcutaneous grafts, inserting K-wire (Kirschner wire) for stabilization of bone fragments or for the correct positioning of prostheses. The low dose emitted ensures safe use for both the patient and the surgeon or doctor on the operating field. On the control panel there is a large touch screen display that allows to adjust the basic functions of the equipment. From this display it is possible to select and adjust the fluoroscopic data for the examination, activate or deactivate the laser pointer, select between pulsed, one shot or standard fluoroscopy, rotate the image and perform all operations on collimator. The four side buttons on the display offer the possibility to move the bow vertically thanks to an extremely silent motor. Neeo has two 19 “medical grade monitors that can be positioned according to the needs of the medical practitioner. Work monitors and feedback monitors are separated to be managed independently. The possible movements are: rotation, revolution, tilting and possibility of height adjustment. Features:
  • Continuous fluoroscopy
  • Pulsed fluorography
  • One Shot fluoroscopy
  • Low dose fluoroscopy
  • Radiography with cassette (up to 5KW)
  • 110,000 images of memory (Standard)
  • 19 ″ Medical Flat Monitor (X2)
  • Touch control panel
  • Image Processing – 1K X 1K, 16 bit
  • DAP-Dose Area Meter
  • DSA Road Mapping
  • Laser Marker
Technical Specification:
  • Power: 5KW
  • kV Range (kV): 40 - 120
  • mAs Range (mAs): 1 - 250
  • SID (mm): 1000
  • Free Space (mm): 730
DICOM Feature:
  • RTP-SW DSA
  • RTP-SW QA
  • RTP-SW Worklist
  • RTP-SW Print
  • RTP-SW CD DVD Saving
  • RTP-SW MPPS
  • RTP-SW Query/Retrieve
  • RTP-SW HCF
  • RTP-SW BASE
  • RTP-SW STCOMMIT
Configuration: C-Arm Structure, Trolley for Monitor, Collimator, Monoblock, Toshiba 12” Image Intensifier, 19″ Philips Medical Flat Monitor (X2), Camera CD1030CA 1KX1K, Sony Printer UP-X898MD, Cassette Holder
Click Here To Download Catalogue
Features:
Safety system:
Permanent running self-tests, 24 hours continuous operating Double independent over-heating protections and automatic cut off Visual and acoustic alarm for high temperature / low temperature/sensor fault
Advance Dry Heating Technology:
Quick Warming up and effective heating 
Heating up to the patient: 
IV tube is completely wrapped in, no heat loss
User friendly interface:
Big LED screen showing set temp., actual temp., heating time and fault situation Easy and quick to set up, ready to use within minutes.
Open system:
Accepts standard IV tube, no special disposables needed The most economical warming solution without extra consumable costs TECHNICAL SPECIFICATIONS Model: FT1800  Temperature setting: 33˚C - 41˚C  Power supply: a.c.100~240V/50~60Hz  Power consumption: Max. 120VA  Type of protection against electric shock: Class I  Degree of protection against electric shock: BF Applied part;  Defibrillation-protected  Degree of protection against ingress of liquids: IPX2  Temperature accuracy: ±1.0˚C  Overheat protection: 42˚C/43˚C  Low temperature alarm 32˚C  Warming up time: From 20˚C to 36˚C approx. 2 min.  Operating mode: Continuous  Dimension (W*D*H): 85×65×175mm  Net Weight: 1.2kg  Warming profile: - length 1400mm  - compatible IV tube 3.5-5.0mm O.D.  
Click Here To Download Catalogue 

Fluoroscopy Powerful, Light and Versatile Performance with the 9″ high-resolution image intensifier and million pixel (1K x 1K) high-definition camera, the Zen-7000 supports clear images without distortion to provide the best diagnostic imaging environment possible.

Exceptional Image Quality
  • 9" or 12” image intensifier
  • 1K x 1K High resolution CCD Camera
  • Wide FOV (Field-of-View)
  • Low Dose, Low Noise
  • High-Definition
  • High Contrast
  • Rotating Anode Tube
X-Ray Dose Management
  • Low Dose Mode
  • Auto / Virtual Collimator
Iris Collimator Compact & Intelligent Design
  • Lightweight Architecture
  • Intelligent operation
  • Compact, Hybrid Body
  • 7" Touch Screen LCD Monitor
19-inch LCD Two Monitor Powerful Software
  • Image Management
  • DICOM 3.0
  • Database Management
  • Approved Format
Air Cooling
  • High Performance
Protection from Overheating and Damage
Click Here To Download Catalogue
 
WeightN/AN/A50 kgN/AN/AN/A
DimensionsN/AN/A120 × 350 × 150 cmN/AN/AN/A
Additional information
Weight 50 kg
Dimensions 120 × 350 × 150 cm
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare