AGA-UNI-MED-Multi-Function Examination Table

• The height and tilt adjustments are controlled by an electric motor. Precision double square guides are installed in the height adjustment mechanism of the AGA-UNI-MED.
• The maintenance-free and extremely quiet electric drives used in the AGA-UNI-MED are controlled by foot switches (alternatively - at no extra charge - by hand switches). The adjustment systems are equipped with key locks. Motor connection values (each): 230V, 50/60 Hz, 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
• The two lifting columns (low-voltage electric drives) of the AGA-DUO-LIFTO-MED, which are characterized by their smooth running, are made of anodized light metal. They are controlled by a transformer and operated by a handset with six buttons. The hand control is multitasking, allowing simultaneous height and tilt adjustment. Motor connection values (each): 230V, 50/60Hz, 6.0A, 240W, IPX6, v=16mm/s, 2 x 1,000N.
• Adjustment of Trendelenburg and anti-Trendelenburg positions.
• The stability and robustness is achieved by the gusset plates in the frame corners.
• A high level of stability is ensured by the wide projection of the base frame, which is fitted with levelling feet.
• The upholstered frame is chrome-plated. The base frame of the AGA-UNI-MED is also chrome-plated and that of the AGA-DUO-LIFTO-MED is lacquered blank steel.
• A pair of standard rails, made of stainless steel, dimensions 25 x 10 mm, length 1,720 mm, are attached to the side of the upholstered frame to hold accessory components.
• The thickness of each of the three upholstery segments (head, middle and foot sections) is 64 mm.
• There are cutouts in the upholstery and upholstery frame at the foot end, where the stainless steel tray included in the scope of delivery, dimensions 300 x 200 x 65 mm (L x W x H) is located.
• Adjustment of the head, middle and foot sections is continuous. They are locked in place using clamping handles with clamping rod mechanisms.

• A pair of standard rails attached to the side of the upholstered frame.
• A pair of leg holders with plastic shells.
• A pair of fastening clamps.
• Cutouts in the foot section and upholstery frame.
• A stainless steel tray with holder.
• A paper roll holder attached to the head end of the upholstered frame.
• A floor frame with levelling feet.
• The foot or hand switches.

• Made of high-strength ABS material
• One-piece ABS plastic top board with raised-edge design, covered transparent soft plastic glass.
• With five drawers: two small size, two middle size and one big size, each inner with partitions which can be organized freely
• One central lock or disposable seal for all drawers
• With transfusion hooks on top and medical equipment holding board
• ABS Medical Crash Cart with CPR Board for Patient with acute stroke
• Pull-out silding typed writing shelf makes efficiency of space application
• Four luxurious noiseless casters, two with brakes

This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Technical Specifications:

• Table top dimension: length 1900mm, width 610mm
• Min.& Max. table height: 660mm~910mm
• Trendelenburg & reverse trendelenburg: reverse trend ≥ 10°, trend ≥15°
• Back section turning: -10°~75°
• Assist platform dimension: length 550mm, width 550mm
• Arm rest swing out: ≥ 90°
• Filth basin dimension:468×338×125mm(can be equipped with soft pipe)
• Power: AC 220V 50HZ

• Waterproof cushion - 1 set
• Waist grab handle - 1 pair
• Leg holder - 1 pair
• Filth basin - 1 piece
• Arm rest - 1 pair
• Foot switch - 1 piece
• Clamp - 1 pair