New

Anesthesia Workstation Model 30

$0.00

Shipped From Abroad

Advanced Anesthesia Workstation Model 30 with LCD ventilator, precise vaporizers, dual gas system, and safety features.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Brands:: Medovo

Description

Features
  • Built in 8” color LCD anaesthesia ventilator

  • Traditional CO₂ absorber (autoclavable, Patent)

  • Dual high end precise vaporizers (Volume > 280ml)

  • Dual gas sources system (O₂/N₂O)

  • Continuous FiO₂ monitoring & bain circuit interface

  • Optional: Electronic tidal volume setting

  • Optional: Anaesthesia gas modular patient monitor

  • Optional: Anaesthesia gas scavenging system

  • Optional: Yoke system & EtCO₂ monitoring function

  • Optional: UPS battery backup system

Technical Specification

Anaesthesia main unit

  • High resolution 8” color TFT LCD screen

  • Built with airway pressure sensor, FiO₂ sensor & flow sensor. The unit can monitor:

    • Tidal volume, Respiratory frequency, I:E rate, Airway pressure, Pressure-time wave, Flow-time wave, High pressure limitation, Low pressure limitation, MV, Apnea, FiO₂, Oxygen concentration under both two operating modes (Auto, Manual)

  • Close, semi-close, semi-open system, open (bain circuit)

  • Application: Adult, Pediatric

  • Low gas alarming: Low O₂ gas pressure, it will give alarm for more than 7 seconds.

  • High pressure limitation: Whenever airway pressure exceeds the pre-set high pressure, the ventilator offers protection automatically to ensure airway pressure does not increase further, ensuring patient safety.

  • Low pressure protection: Once O₂ pressure is less than 0.1 MPa, N₂O gas supply will stop automatically.

  • Power failure alarming, power extendable function

  • O₂ flush: 25 ~ 75L/min

  • Gas pressure:

    • O₂: 0.3 ~ 0.5 MPa

    • N₂O: 0.3 ~ 0.5 MPa

  • Power: 220V±10%, 50Hz±1%

Flow meter

  • O₂/N₂O – double tubes (0.1 ~ 10 L/min)

  • O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

  • Adult or Pediatric bellow 1 set

  • Pneumatic driven electric control

  • Monitor Parameters:

    • Tidal volume, Respiratory frequency, I:E rate, FiO₂,

    • Peak airway pressure, airway pressure wave (P-T, F-T), Minute volume

  • Working mode: Manual, Auto (IPPV, SIMV, SIPPV, Demo, Optional PCV, PSV)

  • Tidal volume: 50 ~ 1500 mL

  • Respiratory frequency: 4 ~ 99 bpm

  • I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

  • Synchronizer trigger Pressure: -2 ~ 0 kPa

  • High pressure limitation: 2 ~ 6 kPa

  • Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

  • Consolidated CO₂ absorber (autoclavable)

Vaporizer

  • High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

  • Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

  • Sevoflurane adjustable range: 0.5 ~ 8% VOL

  • Automatic compensation function – flow, pressure, temperature

  • Self-lock function & inter-lock function

  • Volume: >280 ml

Reviews

There are no reviews yet.

Be the first to review “Anesthesia Workstation Model 30”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAnesthesia Workstation Model 30 removeKIT FOR THORACENTESIS & PARACENTESIS removeLab/Ward Coat removeSiare Morpheus LT Anaesthetic Machine removeElastomeric Pump (Disposable Infusion Pump) with PCA removeBistos BT-770-12.1" Touchscreen Patient Monitor remove
NameAnesthesia Workstation Model 30 removeKIT FOR THORACENTESIS & PARACENTESIS removeLab/Ward Coat removeSiare Morpheus LT Anaesthetic Machine removeElastomeric Pump (Disposable Infusion Pump) with PCA removeBistos BT-770-12.1" Touchscreen Patient Monitor remove
ImageBistos BT-770-12.1" Touchscreen Patient Monitor
SKUSF1033560130101-5SF1033560084-222SF1033560101- 3SF1033560084-18SF1033560059-1
Rating
Price

$0.00

$0.00

$11.00

$0.00

$0.00

$902.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad Advanced Anesthesia Workstation Model 30 with LCD ventilator, precise vaporizers, dual gas system, and safety features.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad he Morpheus LT is an anesthetic machine suitable for treatment of adults, children and new-borns. lt is provided with a mechanical 3-gas flowmeters group and a group tor rapid connection of two vaporizers in line and it is supplied with an advanced manual ventilation system, APL system, or AUX system with traditional To-and-Fro valve switched on and off automatically by ventilator. The unit frame is made tor 30% of light alloy and for 70% of fullyrecyclable plastic materiai. Thanks to the materiai used, the Morpheus has a total weight of less than 80 kgs. Delivery & Availability: Typically 15 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In Stock This product make the tension of silicon capsule as the driving force to control the flow by micro porous tube, it was pre-selected by doctor base on patients'situation, and then and then handed over to the patients ' self- management “to relieve or ease the pain

Delivery & Availability:

Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad The Bistos BT-770 patient monitor is equipped with a 12.1" touchscreen display, which allows for an easy operation and readability with a powerful rechargeable battery guaranteeing a continuous operation of 5 hours to monitor ECG, SpO2, NIBP, temperature and respiration Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • Built in 8” color LCD anaesthesia ventilator

  • Traditional CO₂ absorber (autoclavable, Patent)

  • Dual high end precise vaporizers (Volume > 280ml)

  • Dual gas sources system (O₂/N₂O)

  • Continuous FiO₂ monitoring & bain circuit interface

  • Optional: Electronic tidal volume setting

  • Optional: Anaesthesia gas modular patient monitor

  • Optional: Anaesthesia gas scavenging system

  • Optional: Yoke system & EtCO₂ monitoring function

  • Optional: UPS battery backup system

Technical Specification

Anaesthesia main unit

  • High resolution 8” color TFT LCD screen

  • Built with airway pressure sensor, FiO₂ sensor & flow sensor. The unit can monitor:

    • Tidal volume, Respiratory frequency, I:E rate, Airway pressure, Pressure-time wave, Flow-time wave, High pressure limitation, Low pressure limitation, MV, Apnea, FiO₂, Oxygen concentration under both two operating modes (Auto, Manual)

  • Close, semi-close, semi-open system, open (bain circuit)

  • Application: Adult, Pediatric

  • Low gas alarming: Low O₂ gas pressure, it will give alarm for more than 7 seconds.

  • High pressure limitation: Whenever airway pressure exceeds the pre-set high pressure, the ventilator offers protection automatically to ensure airway pressure does not increase further, ensuring patient safety.

  • Low pressure protection: Once O₂ pressure is less than 0.1 MPa, N₂O gas supply will stop automatically.

  • Power failure alarming, power extendable function

  • O₂ flush: 25 ~ 75L/min

  • Gas pressure:

    • O₂: 0.3 ~ 0.5 MPa

    • N₂O: 0.3 ~ 0.5 MPa

  • Power: 220V±10%, 50Hz±1%

Flow meter

  • O₂/N₂O – double tubes (0.1 ~ 10 L/min)

  • O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

  • Adult or Pediatric bellow 1 set

  • Pneumatic driven electric control

  • Monitor Parameters:

    • Tidal volume, Respiratory frequency, I:E rate, FiO₂,

    • Peak airway pressure, airway pressure wave (P-T, F-T), Minute volume

  • Working mode: Manual, Auto (IPPV, SIMV, SIPPV, Demo, Optional PCV, PSV)

  • Tidal volume: 50 ~ 1500 mL

  • Respiratory frequency: 4 ~ 99 bpm

  • I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

  • Synchronizer trigger Pressure: -2 ~ 0 kPa

  • High pressure limitation: 2 ~ 6 kPa

  • Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

  • Consolidated CO₂ absorber (autoclavable)

Vaporizer

  • High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

  • Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

  • Sevoflurane adjustable range: 0.5 ~ 8% VOL

  • Automatic compensation function – flow, pressure, temperature

  • Self-lock function & inter-lock function

  • Volume: >280 ml

KIT FOR THORACENTESIS & PARACENTESIS

The device is used to drain ascitic fluid and pleural liquid, it contains everything necessary for performing thoracentesis and paracentesis procedure (needles  syringe and collection bag). Products are customized upon request.  
Reference Description Qty per box
H92000E TORASET 1-55 30 pcs
H92010E TORASET 1-80 30 pcs
H92020E TORASET 1-VER 30 pcs
H92030E TORASET2-55 30 pcs
H92040E TORASET 2-80 30 pcs
H92050E TORASET 2-VER 30 pcs
H92001E TORAMATIC 1-55 30 pcs
H92011E TORAMATIC 1-80 30 pcs
H92021E TORAMATIC 1-VER 30 pcs
H92120E PARASET 2 30 pcs
H92160E PARASET 5 20 pcs
H92200E PARASET 8 20 pcs
H92240E PARASET 12 15 pcs
 
Click here to download Catalogue
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
The Morpheus LT is an anesthetic machine suitable for treatment of adults, children and new-borns. lt is provided with a mechanical 3-gas flowmeters group and a group tor rapid connection of two vaporizers in line and it is supplied with an advanced manual ventilation system, APL system, or AUX system with traditional To-and-Fro valve switched on and off automatically by ventilator. The unit frame is made tor 30% of light alloy and for 70% of fullyrecyclable plastic materiai. Thanks to the materiai used, the Morpheus has a total weight of less than 80 kgs. LUNG VENTILATOR The ventilator works by a microprocessor electronic control system with a simple and intuitive interface, which allows the anesthetist to operate in a clear and safe way. The system is provided with 3 dedicated software to have automatically the default settings for adult and paediatric patients and new-borns. lt is provided with the automatic compensation of dead space, the leakages calculation and the automatic calibration of Fi02. Operative Modes: MAN VC-VC PCV-APCV APCV P -SIMV V- SIMV Measured parameters: PAW RATE VM - VTE T INSP Fi02 MANUAL VENTILATION SYSTEM The Morpheus is equipped with an advanced manual ventilation system that can be switched on and off automatically by the ventilator; the operator can select the APL system or the AUX system with traditional T-and-Fro valve and 02 by pass safety system. BREATHING SYSTEM The patient group of Morpheus LT is compact, lightweight for manual removal and fully autoclavable. The patient circuit group is supplied with an automatic heating system avoiding humidity with possibility to use reusable and rechargeable CO, absorbers (TOP SPECIAL) of 1 kg. Absorber is with quick-release enabling replacement also during anaesthesia. The group is supplied with an exposed bellow that can be manually inspected. The MorpheusLT is equipped with 3 wide and large drawers and a large work-shelf to facilitate operating rooms procedures.
Click Here To Download Catalogue
This product make the tension of silicon capsule as the driving force to control the flow by micro porous tube, it was pre-selected by doctor base on patients'situation, and then and then handed over to the patients ' self- management “to relieve or ease the pain Product Components: one-way valve medicated device, elastic liquid storage device, liquid medicine filter, current limiting device, automatic liquid feeding device ( CBI & PCA ), pipe and the external connector; Product Features: 1. The continued to liquid (CBI) make the drug-stored sac mechanical stretch as a driving force, limited the flow through the micro porous tube to the patient safely, effectively, slightly, continuous uniform injection of liquid to analgesic effect; extrusion pump body does not affect the liquid normal velocity; liquid filtering device which can control the particles enter the body better; 2. Continued to liquid + self control to liquid ( CBI+PCA ) make the drug-stored sac mechanical stretch as a driving force, limited the flow through the micro porous tube to the patient safely, effectively, slightly, continuous uniform injection of liquid to analgesic effect; Automatic medicated function is the patients can medicate according to pain independently. Extrusion pump body does not affect the liquid normal velocity; liquid filtering device which can control the particles enter the body better; How to use: 1. Get analgesia pump out from sterile packaging, removing the cap of medicine inlet and outlet; pour the analgesic liquid in the liquid storage device, draw out the air from the liquid storage. 2. Finish medicating, waiting for the liquid outflow from the medicine outlet; please clamp tightly to stop flowing for preparation. 3. Control keys (PCA key) is a function key to add the medicine base on continue to medicated by patients' self-controlled. So the patients can self-control the PCA key under the guidance of doctors, according to the needs while they are in treatment. At the same time, doctor should fill in PCA treatment card, so that they can analyze the condition from PCA additional times.
Bistos BT-770 is a 12.1" touchscreen patient monitor designed for easy operations. SPECIFICATIONS
  • 12.1“ color TFT touch screen
  • ECG, Resp., SpO2, NIBP, Temp., CO2, IBP, Multi-gas, C.O., Masimo SpO2
  • Precise ECG measurement with pacemaker detection ST segment and 16 types of arrhythmia analysis Double overpressure protection for NIBP Intelligent cuff inflation pressure adjustment
  • Smart Hook/Stand design, provide multiple placement modes Plug & Play Modular IBP& C.O., Modular Printer Multiple configuration options: 4-channel IBP, CO2, invasive C.O., Multi-gas Over 5 hours continuous working on battery 12-15V wide range DC input, suitable for ambulance Capable to connect with central monitoring system HL7 export to clinical information systems (option)
 
Click Here To Download Catalogue
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare