Anesthesia Workstation Model 30

$0.00

Shipped From Abroad

Advanced Anesthesia Workstation Model 30 with LCD ventilator, precise vaporizers, dual gas system, and safety features.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Brands:: Medovo

Description

Features
  • Built in 8” color LCD anaesthesia ventilator

  • Traditional CO₂ absorber (autoclavable, Patent)

  • Dual high end precise vaporizers (Volume > 280ml)

  • Dual gas sources system (O₂/N₂O)

  • Continuous FiO₂ monitoring & bain circuit interface

  • Optional: Electronic tidal volume setting

  • Optional: Anaesthesia gas modular patient monitor

  • Optional: Anaesthesia gas scavenging system

  • Optional: Yoke system & EtCO₂ monitoring function

  • Optional: UPS battery backup system

Technical Specification

Anaesthesia main unit

  • High resolution 8” color TFT LCD screen

  • Built with airway pressure sensor, FiO₂ sensor & flow sensor. The unit can monitor:

    • Tidal volume, Respiratory frequency, I:E rate, Airway pressure, Pressure-time wave, Flow-time wave, High pressure limitation, Low pressure limitation, MV, Apnea, FiO₂, Oxygen concentration under both two operating modes (Auto, Manual)

  • Close, semi-close, semi-open system, open (bain circuit)

  • Application: Adult, Pediatric

  • Low gas alarming: Low O₂ gas pressure, it will give alarm for more than 7 seconds.

  • High pressure limitation: Whenever airway pressure exceeds the pre-set high pressure, the ventilator offers protection automatically to ensure airway pressure does not increase further, ensuring patient safety.

  • Low pressure protection: Once O₂ pressure is less than 0.1 MPa, N₂O gas supply will stop automatically.

  • Power failure alarming, power extendable function

  • O₂ flush: 25 ~ 75L/min

  • Gas pressure:

    • O₂: 0.3 ~ 0.5 MPa

    • N₂O: 0.3 ~ 0.5 MPa

  • Power: 220V±10%, 50Hz±1%

Flow meter

  • O₂/N₂O – double tubes (0.1 ~ 10 L/min)

  • O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

  • Adult or Pediatric bellow 1 set

  • Pneumatic driven electric control

  • Monitor Parameters:

    • Tidal volume, Respiratory frequency, I:E rate, FiO₂,

    • Peak airway pressure, airway pressure wave (P-T, F-T), Minute volume

  • Working mode: Manual, Auto (IPPV, SIMV, SIPPV, Demo, Optional PCV, PSV)

  • Tidal volume: 50 ~ 1500 mL

  • Respiratory frequency: 4 ~ 99 bpm

  • I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

  • Synchronizer trigger Pressure: -2 ~ 0 kPa

  • High pressure limitation: 2 ~ 6 kPa

  • Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

  • Consolidated CO₂ absorber (autoclavable)

Vaporizer

  • High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

  • Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

  • Sevoflurane adjustable range: 0.5 ~ 8% VOL

  • Automatic compensation function – flow, pressure, temperature

  • Self-lock function & inter-lock function

  • Volume: >280 ml

Reviews

There are no reviews yet.

Be the first to review “Anesthesia Workstation Model 30”

Your email address will not be published. Required fields are marked *

Quick Comparison

Anesthesia Workstation Model 30 removeOxygen Concentrator 3Ltr. removeRender SD-M2000C+ Anesthetic Machine removeBistos BT-770-12.1" Touchscreen Patient Monitor removeDrip Stand removeLab/Ward Coat remove
NameAnesthesia Workstation Model 30 removeOxygen Concentrator 3Ltr. removeRender SD-M2000C+ Anesthetic Machine removeBistos BT-770-12.1" Touchscreen Patient Monitor removeDrip Stand removeLab/Ward Coat remove
ImageBistos BT-770-12.1" Touchscreen Patient Monitor
SKUSF1033560084-40SF1033560011-11SF1033560059-1SF1033560084-67SF1033560084-222
Rating
Price

$0.00

$273.00

$4,070.00

$902.00

$27.00

$11.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad Advanced Anesthesia Workstation Model 30 with LCD ventilator, precise vaporizers, dual gas system, and safety features.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T, PayPal
Customized: Customized
Certification: CE, FDA, ISO13485
Scale: Medium
Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad
  • 5.5" monochrome TFT LCD screen
  • Built in Anesthesia ventilator
  • Updated 2 high precise vaporizers ZF-3000 (Volume > 250ml)
  • Updated high brightness LED lamp
  • Compact CO2 absorber (autoclavable)
  • Optional: Continuous FIO2 monitoring
  • Optional: Anaesthesia gas scavenging system
  • Optional: Yoke system for 5L O2/N2O cylinders
  • Optional: Integrated suction unit on air
Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad The Bistos BT-770 patient monitor is equipped with a 12.1" touchscreen display, which allows for an easy operation and readability with a powerful rechargeable battery guaranteeing a continuous operation of 5 hours to monitor ECG, SpO2, NIBP, temperature and respiration Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In stock Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In stock
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • Built in 8” color LCD anaesthesia ventilator

  • Traditional CO₂ absorber (autoclavable, Patent)

  • Dual high end precise vaporizers (Volume > 280ml)

  • Dual gas sources system (O₂/N₂O)

  • Continuous FiO₂ monitoring & bain circuit interface

  • Optional: Electronic tidal volume setting

  • Optional: Anaesthesia gas modular patient monitor

  • Optional: Anaesthesia gas scavenging system

  • Optional: Yoke system & EtCO₂ monitoring function

  • Optional: UPS battery backup system

Technical Specification

Anaesthesia main unit

  • High resolution 8” color TFT LCD screen

  • Built with airway pressure sensor, FiO₂ sensor & flow sensor. The unit can monitor:

    • Tidal volume, Respiratory frequency, I:E rate, Airway pressure, Pressure-time wave, Flow-time wave, High pressure limitation, Low pressure limitation, MV, Apnea, FiO₂, Oxygen concentration under both two operating modes (Auto, Manual)

  • Close, semi-close, semi-open system, open (bain circuit)

  • Application: Adult, Pediatric

  • Low gas alarming: Low O₂ gas pressure, it will give alarm for more than 7 seconds.

  • High pressure limitation: Whenever airway pressure exceeds the pre-set high pressure, the ventilator offers protection automatically to ensure airway pressure does not increase further, ensuring patient safety.

  • Low pressure protection: Once O₂ pressure is less than 0.1 MPa, N₂O gas supply will stop automatically.

  • Power failure alarming, power extendable function

  • O₂ flush: 25 ~ 75L/min

  • Gas pressure:

    • O₂: 0.3 ~ 0.5 MPa

    • N₂O: 0.3 ~ 0.5 MPa

  • Power: 220V±10%, 50Hz±1%

Flow meter

  • O₂/N₂O – double tubes (0.1 ~ 10 L/min)

  • O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

  • Adult or Pediatric bellow 1 set

  • Pneumatic driven electric control

  • Monitor Parameters:

    • Tidal volume, Respiratory frequency, I:E rate, FiO₂,

    • Peak airway pressure, airway pressure wave (P-T, F-T), Minute volume

  • Working mode: Manual, Auto (IPPV, SIMV, SIPPV, Demo, Optional PCV, PSV)

  • Tidal volume: 50 ~ 1500 mL

  • Respiratory frequency: 4 ~ 99 bpm

  • I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

  • Synchronizer trigger Pressure: -2 ~ 0 kPa

  • High pressure limitation: 2 ~ 6 kPa

  • Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

  • Consolidated CO₂ absorber (autoclavable)

Vaporizer

  • High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

  • Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

  • Sevoflurane adjustable range: 0.5 ~ 8% VOL

  • Automatic compensation function – flow, pressure, temperature

  • Self-lock function & inter-lock function

  • Volume: >280 ml

Our anesthesia system is a precision crafted, life-sustaining device. When moving to an O2 concentrator from tanks, you should expect the same attention to detail. A full 8lpm O2 flowrate capability - gives better performance at lower flow rates 20psi pressure output - your anesthesia system was designed to work from pressure O2 concentrations average 93% +/- 3% Built-in Low O2 Concentration Alarm Small footprint of 15"x15"x22" Remarkably quiet Save money over time vs. tanks Eliminate contamination hazards of tanks coming and going in your facility Works with ALL manufacturer's brands of anesthesia systems
    • .
   
  • 5.5" monochrome TFT LCD screen
  • Built in Anesthesia ventilator
  • Updated 2 high precise vaporizers ZF-3000 (Volume > 250ml)
  • Updated high brightness LED lamp
  • Compact CO2 absorber (autoclavable)
  • Optional: Continuous FIO2 monitoring
  • Optional: Anaesthesia gas scavenging system
  • Optional: Yoke system for 5L O2/N2O cylinders
  • Optional: Integrated suction unit on air
 
Click Here To Download Catalogue
   
 
Bistos BT-770 is a 12.1" touchscreen patient monitor designed for easy operations. SPECIFICATIONS
  • 12.1“ color TFT touch screen
  • ECG, Resp., SpO2, NIBP, Temp., CO2, IBP, Multi-gas, C.O., Masimo SpO2
  • Precise ECG measurement with pacemaker detection ST segment and 16 types of arrhythmia analysis Double overpressure protection for NIBP Intelligent cuff inflation pressure adjustment
  • Smart Hook/Stand design, provide multiple placement modes Plug & Play Modular IBP& C.O., Modular Printer Multiple configuration options: 4-channel IBP, CO2, invasive C.O., Multi-gas Over 5 hours continuous working on battery 12-15V wide range DC input, suitable for ambulance Capable to connect with central monitoring system HL7 export to clinical information systems (option)
 
Click Here To Download Catalogue
Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Use : Bedridden patients, Senior citizen care, Patients in coma Advantages :
  • High quality stainless steel construction
  • Properly electroplated for anti rust finish
  • Ball shaped castors for smooth movement
  • Provided with an infusion stand
  • Attached 4 pcs hook
  • Maximum load strength
  • Screw safety height adjustment
  • Light weight
   
  • This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
  • This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
  • Easy to wash.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare