View cart “Bunsen Burner” has been added to your cart.

Chemistry-Experiments / Health Education

Ax60+ Kiosk

Brands: Analox

~~$0.00~~

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130141-6

Brands:: Analox

Description
Reviews (0)

Description

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped.

The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA – 5,000ppm (0.5%) AL1 – 5,000ppm (0.5%) AL2 – 15,000ppm (1.5%) AL3 – 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA – 5,000ppm (0.5%) AL1 – 15,000ppm (1.5%) CO2 – 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Reviews

There are no reviews yet.

Be the first to review “Ax60+ Kiosk”

Quick Comparison

Ax60+ Kiosk remove Bunsen Burner remove Pilot-RO Water Purification System remove DISSUB ANALYSER remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove CARBON MONOXIDE MONITORING SYSTEM (AX60+ CO) remove

Name Ax60+ Kiosk remove Bunsen Burner remove Pilot-RO Water Purification System remove DISSUB ANALYSER remove PERSONAL CO2/O2 MONITOR-SUB-ASPIDA remove CARBON MONOXIDE MONITORING SYSTEM (AX60+ CO) remove

Image

SKU SF1033560130141-6 SF1033560084-155 SF1033560130126-2 SF1033560130141-17 SF1033560130141-13 SF1033560130141-1

Rating

Price

~~$0.00~~

$4.25

~~$0.00~~

~~$0.00~~

~~$0.00~~

~~$0.00~~

Stock

Availability

Add to cart

Description

Shipped From Abroad

Key Features

Low maintenance
Quick Connect System
Pre-wired, ready to go
Can support up to 4 alarm units
Push button for unit testing

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key Features

Proven hyperbaric sensing capability
You have the ability to change sensors and maintain the unit in the dockyard, reducing costs and downtime
Backlit display for low/no light situations
Portable and lightweight making it easy to use around the submarine
Externally accessible batteries making for more convenient and safer changing
MODBUS RTU over RS485 digital communications, allowing for easy incorporation into your existing platform management system, including JANUS enabled underwater communication networks

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Key features

It is the only portable monitor to be pressure corrected ensuring no false readings are given
The Sub Aspida is compact in size (127 x 44 x 90mm LxDxW)
The oxygen (O2) sensor can be calibrated on air, reducing costly gas requirements and making you self sufficient in the maintenance of the sensor
The carbon dioxide (CO2) sensor only needs calibrating every 12 months
OLED (Organic Light Emitting Diode) display
Pressure compensated CO2 & O2 sensors
Rechargeable battery-operated (NiMH)
Datalogging
Man-down alarm
Can offer continuous monitoring or spot checking
Audio, visual and vibration alarms
TWA (Time Weighted Average) Alarm
User maintainable
Can be worn on the belt or clipped to a panel
Pressure range of 700-1200mbara
Maintenance reminders as standard

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

The Ax60+ CO protects users in plant rooms, parking garages and anywhere that carbon monoxide can collect. The Ax60+ CO also can be used for online cylinder filling, to protect divers from compressed air contaminated with carbon monoxide related to compressor maintenance or contamination at the compressor inlet.

The Ax60+ CO benefits from the ability to operate as a single sensor and alarm or as part of a system of up to 4 sensors. Each system can also be composed of Ax60+: O2 sensors and Ax60+ CO2 sensors so it can fulfil multiple application needs.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

CO2 MONITOR & ALARM DESIGNED FOR KIOSKS

The Ax60+ Kiosk is a CO2 monitor and alarm specifically designed by Analox to alert personnel to a build up/leak of CO2 using a state-of-the-art infrared sensor. The alarm provides both audio and visual alerts in the case of increased levels of carbon dioxide (CO2). Up to four alarms can be added as needed and the unit does not need periodic calibration.

CO2 monitoring with the AX60+ Kiosk

The Ax60+ Kiosk is a smaller version of the popular Ax60+ carbon dioxide (CO2) monitor. It is simple to wall mount in the area where carbon dioxide (CO2) is stored or piped. The Ax60+ Kiosk sensor needs to be installed at a height of 12-18 inches (305-457mm) above the floor – this is because the carbon dioxide (CO₂) that leaks from a gas cylinder is denser than ambient air and can collect at low levels. The alarm should be located above the sensor at about head height or at the entrance to the kiosk.

Technical Specification

Sensor Unit


Gas detected	Carbon Dioxide (CO2)
Sensor technology	Infrared
Range	0.1% to 5%
Default alarm set-points	USA regulations (NFPA 55, IFC, NBIC, OSHA and NIOSH): TWA - 5,000ppm (0.5%) AL1 - 5,000ppm (0.5%) AL2 - 15,000ppm (1.5%) AL3 - 30,000ppm (3%) International/European regulations (EH40) (DIN 6653-2:2015-06 compliant, assessed by TUV): TWA - 5,000ppm (0.5%) AL1 - 15,000ppm (1.5%) CO2 - 30,000ppm (3%)
Warm up time	40 Seconds
Resolution	0.01%
Accuracy	±2.5% of the alarm levels
Response Time	30 seconds to T90
IP Rating	IP55
LED indicators	Green = Power

Alarm Unit


Strobe	White LED strobe, with an option to change to blue, red or amber filter.
Sounder	min 80 dBA @3 m (9.8 feet)
IP Rating	IP55
LED indicators	Green = Power, Amber = Fault
Cable	2m included

Item: Bunsen Burner
Btu Output: 800 - 1200
Overall Height: 6-1/8"
Fuel Type: Natural
Barb Size: 7/16"

An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments

Technical Parameters

Product Model	Pilot-RO45	Pilot-RO63	Pilot-RO90	Pilot-RO120	Pilot-RO180
Pure water output*	45L/Hour	63L/Hour	90L/Hour	120L/Hour	180L/Hour
RO reverse osmosis water indicators
Ion retention rate	98%-99% (when using new RO membrane)
Organic matter retention rate	>99%, when MW>200 Daltons
Particle and bacteria retention	>99%
bacteria	<0.01 cfu/ml (optional 0.2μm imported PES terminal filter)
Particles (>0.2μm)	<1/ml (optional (0.2μm imported PES terminal filter)
Raw water requirements	Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ ^cm2
Size and weight	Length × width × height: 640 × 540 × 1110mm; Weight: about 70Kg
Electrical requirements	220V, 50/Hz
power	120W	120W	240W	240W	240W
System Configuration	Main unit (including 1 set of purification column) + 2 built-in 15L pressure water buckets + TDS/conductivity test pen + accessory bag

Description

The Sub Mk3P Continuous Gas Monitor from Analox is designed specifically to monitor life support gasses aboard a submarine in the event of a distressed submarine (DISSUB) situation.

Portable and lightweight, the Sub Mk3P monitor provides crucial information to the senior survivor about the state of the atmosphere inside the submarine during a time of crisis. This information helps that officer make one of the most challenging decisions any submariner ever has to make – attempt to escape the submarine or wait for rescue teams.

Technical Specification

Temperature & Humidity Sensor

Main Unit


Battery power	4 x ‘D’ alkaline cells (Hyperbaric)
External power	24V dc (9-36V dc), <0.5A
Backup batteries	2 x LR43 alkaline manganese cells
Displays	6 x 4 character LCD, with symbols and LED backlights
Operating temperature	-5 to 50°C
Storage temperature	-5 to 50°C
Operating pressure	0.7 to 10barA
Operating humidity	0 to 100%RH (Non-condensing)
Standards/ compliance	NATO STANAG 1476:2014 ANEP/MNEP 85 & 86 (2014) DEF STAN 59-411:2014 (EMC) IACs E10:2014 (MarED) type tested IP65 CE marked (RoHS)"
Dimensions (W, H, D)	240mm x 198mm x 127mm
Weight	2kg with batteries installed

O2 Sensor


Range	0 to 2000mbar pO2
Accuracy	±10mbar (0 to 300mbar pO2) ±50mbar (300 to 2000mbar pO2)
Response time (t90)	20s
Detection mode	Electro-chemical
Shelf life (in sealed packaging)	6 months
Expected life (in air)	12 months

CO2 Sensor


Range	0 to 100mbar pCO2
Accuracy	±10mbar
Response time (t90)	60s
Detection mode	Infrared
Expected life (in air)	5 years

Pressure Sensor

Range	0.7 to 10barA (-3 to 90MSW or -10 to 300FSW)
Accuracy (including annual drift)	-0.07bar +0.04bar
Response time (t90)	<1s
Detection mode	Piezoresistive
Expected life (in air)	>12 months (Replaced as a part of the O2sensor)

Click here to download Data Sheet

Click here to download Technical Manual

Description

The Sub Aspida is a personal, portable monitor which is used to detect levels of carbon dioxide (CO2) and oxygen (O2) in pressurized environments.

CO2 monitoring & O2 monitoring with the Sub Aspida

Unlike industrial sensing monitors, the Sub Aspida was designed with pressure corrected sensors, giving you 100% confidence in your readings. The Sub Aspida has been upgraded to support those who work at high altitude. Pressure tested to 10,000 ft or 700 MB, the Sub Aspida will remain accurate and reliable when monitoring CO2 and O2 in the atmosphere, meaning you can concentrate on the job at hand!

Technical Specification

SUB-ASPIDA

Operating temperature	0°C to +50°C
Operating pressure	700 to 1200 mbara
Humidity Range	0 to 99% RH
Display	High-visibility, Organic Light Emitting Diode (OLED) display
Alarm horn	95dB @ 30cm
LED indicators	1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
Internal data log	1 log every 30 seconds for at least 7 days of continuous use
Batteries	2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
Battery discharge time	12 hours under normal operation (Passive atmospheric monitoring, minimal user interaction, no alarms)
Battery lifespan	2 years
Battery charge time	4.5 hours (from flat)
Charge power supply rating	9 V DC - 0.55A, DC jack 5.5x12.0x2.1mm centre +ve
Electronics warranty	2 years
IP rating	IP65
Dimensions	127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (LxDxW)
Weight	335g/11.8oz , O2 350g/12.3oz, CO2 335g/11.8oz

SENSORS

CO2 Sensor Unit	O2 Sensor Unit
Sensor type	Analox infrared MIR	Electrochemical
Accuracy (at standard temperature and pressure)	±(1% of full scale + 2% of reading)	±1% of full scale (For best performance, calibrate the Sub Aspida while on battery power only.)
Range	0.01 to 50.0 mbar ppCO2 (0.01 to 5% at 1000 mbara)	0.1 to 2000.0 mbar ppO2 (0.1 to 100% O2 at 1000 mbara)
Response time	T90 <60 seconds	T90 <30 seconds
Sensor life span	5 years	1 year (expected)

https://youtu.be/--wsZFTYVWs?si=nI8q1AThpkBD4yNv https://youtu.be/Bi7CmSLIIbA?si=dVXlyZaRw893no_T

Key Features

Ambient CO monitoring
Online CO monitoring
Can be used with Nitrogen (N2) background gasses or, with calibration, can be used with Helium (He) background gasses
Has up to 3 user configurable alarms
Can operate as a stand alone sensor or as part of a larger system
Compatible with the rest of the Ax60+ range

Click here to download Quick Start Guide

Click here to download Manual

Click here to download Service Manual

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Click outside to hide the comparison bar

Compare