Bullet Ice Maker

Bullet Ice Maker Features:

1. Featuring a elegant all-stainless steel design, surface is easy to clean, and resists oil sticking.
2. Advanced micro-computer control system, operates intelligently and automatically throughout the entire ice-making process.
3. Designed with energy-saving, boasts high efficiency and stability. It produces and removes ice faster, saving time and water while using one-third less electricity than similar products.
4. Bullet ice maker equipped with a scientifically configured condensation and temperature system, can operate effectively in a variety of ambient temperatures.
5. Long-term ice-making performance testing and monitoring before the factory, to ensure excellent product performance.

1. High-efficiency insulation is lower, the ice storage space uses food-grade standard PP material, ice consumption more assured!
2. The ice making machine has an indication of operation, water shortage, ice full, fault indicates. In the event of water shortage, ice full, and malfunctioning conditions, it will automatically stop working. More securely and with confidence.
3. Strict manufacturing process, original imported spare parts, lower failure rate, longer service life.
4. Long-term ice-making performance testing and monitoring before the factory, to ensure excellent product performance.

Product Data

• Ice Type : Cylindrical block ice
• Ice Making Capacity (kg/24h) : 25 / 50 / 80 / 120
• Ice Storage(kg) : 7 / 14 / 25 / 50
• Consumption (W) : 240 / 380 / 580 / 760

Bullet Ice Maker Specifications:

• Mechanic gas mixing system
• Electronic lung ventilator with 12” TFT colour display
• Valves group: open, semi-closed, closed, heated, with soda lime absorber (1,5 Kg)
• SIARETEX rapid connection device, Selectatec compatible for 2 vaporizers
• Gas supply group
• Ventilation modalities: APCV-PCV; APCV-TV; PSV; APNEA BACK-UP; VC-VAC; VC-VAC BABY; SIMV+PS (volumetric); SPONT; MANUAL.
• Measured parameters: PAW; PEEP; Vte; ExpMV; Rate; I:E; FiO2, Pmax; Pmean; Pause; Vti; FLOWi; FLOWe; Tinsp; Tesp; Tpause; Cs; Ri
• Displayed ventilation curves: Paw, Flow, Volume, Loop (Volume/Paw ; Volume/Flow)
• Adjustable parameters: – O2 built-in Mixer device from 21% to 99% – I:E Adjustable Ratio: 1:1-1:2-1:3-1:4-2:1-3:1 – Inspiratory Flow – PEEP – Breathing Rate – Minute Volume; – Tidal Volume – Inspiratory Pressure Limit – Inspiratory Pause – Inspiratory Time – Trigger
• Mechanic flowmeter module: 3-flow mechanical flow meter (O2 – N2O – AIR) with 5 flow meters for low flows. Equipped with safety systems (MIX-LIFE, CUT-OFF, flow meter protection valve).
• Breathing system: The breathing system of Morpheus guarantees to the user an absolute flexibility and easy handling thanks to the noble construction materials employed. The valves group can be drawn-up and it’s totally autoclavable at 121°C and all its parts are manually dismountable, with no need of special tools.The breathing system is made of; Calibrated APL valve, Fresh gas collecting bag, O2 cell for reading of FiO2, Removable 1 kg soda lime canister, Manually inspectionable bellows jar, Safety valve for ambience air suction in case of fresh gas failure, Flow transducer inside the group located on the expiratory line.

Click Here To Download Catalogue

• Test Method: Dry Strip color-developing method
• Test Principle: Dual wavelength reflectance photometry
• Light Source: Cold Lamp with high brightness and long lifetime
• Test System: Color-indentify system with high sensitivity and repeatability
• Wavelength: 520nm, 640nm, 660nm
• Throughput: 120 Strips/Hour
• Test Mode: Single and continuous test mode are selectable
• Test Slot: Using sliding Slot, Easy to clean and replace, lower the carryover
• Waste Collection: Waste urine and waste strips can be collected automatically
• Test Strip: Use GENIUS original strips only
• Display: LCD with high brightness and resolution
• Language: Customizable language software
• Memory: Save 2000 samples results, and auto recover the results when power off during working
• Interface: RS-232 serial port, can be connected to external printer and computer Printer: Inner thermal printer, can be connected to external printer
• Report format: Half quantitative and qualitative, report the color and turbidity is available
• Result unit: SI unit and routine unit are selectable
• Status Check: Auto-check the status during power on and off, auto-indentify the alarm
• Working Environment: Temperature10℃～30℃; Humidity: 20%RH～80%RH
• Power: 100-240V, Auto adapt according to the input voltage
• Consumption: ≤80VA
• Quality System: Certified by TUV and CMD

• State-of-the-art low-noise amplifier with 18-bit A/D converters and artifact-reduction software provides clean waveforms
• Built-in rejection ratios of 110 dB or greater (differential mode) and 112 dB or greater (isolation mode) limit variations in signals
• Electrode input impedance of 200 MΩ ±20% helps ensure clean signals
• On-screen examination guide directs electrode and stimulation placement for smooth and efficient examinations
• HL7^® gateway integration helps ensure quick flow of information and streamlines workflow
• Intuitive control panel and stimulators aid in acquiring and progressing through studies
• Customizable protocols shorten examination time
• One-click report generation produces print-ready reports with customized logos, test results, exam waveforms and highlighted abnormal values
• Proprietary all-in-one NCS program performs MCS, SCS and F-wave for quick examinations
• Customized auto-copy settings allow waveforms to be stored and automatically transferred to long-term storage

Click Here To Download Catalogue