| Description | Shipped From Abroad
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| In stock
This features small physical size and low mass, and the LCD digital display provides a rapid, unambiguous readout. An audible tone indicates completion of the measuring period and automatic switch-off takes place after ten minutes to conserve battery life.
Delivery & Availability:
Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In stock
- Single-piece construction creates added durability
- Color-coded sizing and range markers support proper fit and accuracy
- Tapered tail makes cuff application easier than with regular straight cuffs
- Rounded corners for added comfort
- Easy-clean design helps minimize cross-contamination without compromising longevity
- Leak tested and engineered to meet AHA, AAMI-SP10, and MDD regulatory guidelines
- 100% latex, PVC, and DEHP free
Delivery & Availability:
Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In Stock
Disposable Polythene Apron
Delivery & Availability:
Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In Stock
- Spirometer cardboard paper mouth piece are suitable for use with the spirometer.
- Significantly reduces the risk of cross-infection between patients.
- Essential Spirometry Consumables.
- The mouthpiece used in spirometric testing may vary from instrument to instrument.
- It is essential that the patient puts it between the teeth with the lips around it, so that the air can pass freely and the mouthpiece is sealed firmly by the lips.
- Dentures are best left in place because they provide essential support to cheeks and lips; however, if they fit poorly and obstruct airflow during the maneuvers it is better to remove them from the mouth.
Delivery & Availability:
Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In Stock
- Adult Velcro Cuff for maximum arm circumference of 34.3cm
- Made in UK & guaranteed accurate to BS EN 1060 – 1
- Lightweight diecast case
- Shatter-proof plastic manometer tube
- Mercury reservoir with isolation valve
- Steel hinge pivots
- Range 0 – 300mmHg
- Supplied with adult size cuff & latex-free bulb
Delivery & Availability:
Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. |
| Content |
| REF |
Type |
Descriptions |
Qty.Cs |
| GCR103404 |
Anesthesia Circuit |
Length: 1.2m
ID: 15.0mm
ID: 22.0mm |
30PCS
70 x 56 x 50cm |
| GCR103415 |
Breathing Circuit
With two water traps |
Length: 1.8m
ID: 15.0mm
ID: 22.0mm |
30PCS
70 x 56 x 50cm |
| GCR103416 |
Extendable Circuit |
Length: 1.6m
ID: 15.0mm
ID: 22.0mm |
50PCS
70 x 56 x 50cm |
| REF |
Descriptions |
Qty.Cs |
| GCR103401 |
Length: 0.2m
ID: 15mm\22mm, OD: 15mm
Luer port |
30PCS
70 x 56 x 50cm |
| GCR103402 |
Length: 0.2m
ID: 15mm\22mm, OD: 15mm
Helix Locking notch |
30PCS
70 x 56 x 50cm |
| GCR103408 |
Length: 0.18m
ID: 15mm\22mm,
OD: 15mm |
50PCS
70 x 56 x 50cm |
| This features small physical size and low mass, and the LCD digital display provides a rapid, unambiguous readout. An audible tone indicates completion of the measuring period and automatic switch-off takes place after ten minutes to conserve battery life.
- Measurement range: 32.0 to 43.0°C
- Accuracy: ± 0.1°C
- Sensor: Thermistor
- Readout: Three digit LCD with indication of out-of-range high or low temperature and low battery
- Sampling rate: Two per second
- Power source: Silver oxide cell type SR41W or equivalent giving 200 hours life (three years of normal use approx)
- Power switch: Manual on/off button
- Automatic switch-off: Ten minutes after last indication
- Dimensions: L130 x W18 x H9mm overall
- Probe tip diameter: 3mm
- Mass: 7g
- Supplied fitted with silver oxide cell SR41W.
|
- Single-piece construction creates added durability
- Color-coded sizing and range markers support proper fit and accuracy
- Tapered tail makes cuff application easier than with regular straight cuffs
- Rounded corners for added comfort
- Easy-clean design helps minimize cross-contamination without compromising longevity
- Leak tested and engineered to meet AHA, AAMI-SP10, and MDD regulatory guidelines
- 100% latex, PVC, and DEHP free
| Disposable Polythene Apron |
- Spirometer cardboard paper mouth piece are suitable for use with the spirometer.
- Significantly reduces the risk of cross-infection between patients.
- Essential Spirometry Consumables.
- The mouthpiece used in spirometric testing may vary from instrument to instrument.
- It is essential that the patient puts it between the teeth with the lips around it, so that the air can pass freely and the mouthpiece is sealed firmly by the lips.
- Dentures are best left in place because they provide essential support to cheeks and lips; however, if they fit poorly and obstruct airflow during the maneuvers it is better to remove them from the mouth.
|
- Adult Velcro Cuff for maximum arm circumference of 34.3cm
- Made in UK & guaranteed accurate to BS EN 1060 – 1
- Lightweight diecast case
- Shatter-proof plastic manometer tube
- Mercury reservoir with isolation valve
- Steel hinge pivots
- Range 0 – 300mmHg
- Supplied with adult size cuff & latex-free bulb
|
Reviews
There are no reviews yet.