HONKON-M207 Water Oxygen Facial Cleanser
$0.00
Shipped From Abroad
Operation scope:
Water oxygen facial cleanser
1. Clean the epidermis of the skin
2. Rehydrate and oxygenate the skin.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
Principle of Operation
How it works:
HONKON’s water oxygen cleanser fully combines oxygen and nutrient solution, and sprays water vapor mixed particles from the nozzle at a speed of 230m/s (similar to the spray form) to act on the skin. The fine particles with a diameter of about 50-80um (smaller than the diameter of the pores) clean the skin from the epidermis to the basal layer below the epidermis. If nutrients are added to the base liquid, the internal environment of the skin can be adjusted, which can replace manual skin care.
Operating range:
1. Clean the epidermis of the skin
2. Hydrate and oxygenate the skin.
Product advantages:
The high-pressure gas is mixed with the nutrient solution through a stainless steel needle and sprayed out water vapor particles with a diameter of about 50μm at a speed of up to 230m/s.
Oxygen pressure gauge, real-time pressure display.
The gas output flow control system can adjust the gas output volume and gas output pressure according to different parts.
It can be used with nutrient solution products to achieve better results.
The liquid output flow control system can adjust the liquid output volume and liquid output pressure according to different parts, which is more targeted.
Technical Parameters:
Water mist particle speed: ≤230m/s
Built-in air source output pressure: ≤0.8MPa
Number of instruments: 4
Water mist particle diameter: ≤80um
Gas source type: built-in gas source 5L gas tank
Water oxygen pen: O-II
Number of water oxygen pens: 2
Insurance specification: Max6A
Power supply: AC220V±10%, 50HZ, AC110V±10%, 60HZ
Gear: 1-2 gears adjustable, one gear step
Accessories Details:
O—II Water Oxygen Pen
It is beautiful, easy to use, and can be repaired after damage, which reduces the user’s cost of use; the deep cleaning effect is obvious; customers are advised to stock up on water oxygen pens O-Ⅱ type for emergencies.
Quick Comparison
| Settings | HONKON-M207 Water Oxygen Facial Cleanser remove | Portable Medical 365nm Woods Lamp for Skin Analysis remove | Electric Dermatome remove | CryoIQ CIQ-DP-L- Cryo DERM Plus Liquid Device with LED Light (CiQ-A-LED) remove | CryoPen B+ remove | Lab/Ward Coat remove | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | HONKON-M207 Water Oxygen Facial Cleanser remove | Portable Medical 365nm Woods Lamp for Skin Analysis remove | Electric Dermatome remove | CryoIQ CIQ-DP-L- Cryo DERM Plus Liquid Device with LED Light (CiQ-A-LED) remove | CryoPen B+ remove | Lab/Ward Coat remove | ||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||
| SKU | SF1033560130100-10 | SF10335601217 | SF10335601214 | SF1033560096-4 | SF1033560096-1 | SF1033560084-222 | ||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||
| Price |
|
| $6,507.00 |
|
| $11.00 | ||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||
| Description | Shipped From Abroad
Operation scope:
Water oxygen facial cleanser
1. Clean the epidermis of the skin
2. Rehydrate and oxygenate the skin.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
The Wood's lamp test is done to help to detect several conditions affecting the skin, including:Bacterial infections, Fungal infections, Ectoparasites infestations, Skin coloring changes. Some skin diseases such as vitiligo, acne and host of other cause the skin to fluoresce Vitiligo, Bacterial Infections, excema, Porphyria, Erythasma, Alopecia, Tinea Versicolor Fungus &Fungal Infections, Head Lice and their nits, Fluoresce under black light Ringworm, Scabies, Child abuse/bruising can often be discerned with the wood's lamp.
Delivery & Availability:
Typically 14-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped From Abroad
1. Skin Graft Thickness: 0-0.75 mm in 0.05 mm increment, the skin thickness
adjusting button is unilateral adjustment, with high stability and no need
calibrate to zero.
2. Skin Graft Width: 2.5~10.2cm,4 size width plates:2.5cm,5.1cm,7.6cm,10.2cm.
Note: Special size width plate can be customized according to requirements.
3. The blade has self-lubricating function and is easy to load and unload. It can move
back and forth smoothly to prevent metal to metal collision.
4. Original imported motor, low inertia electric motor will hardly produce any
vibration when rotating, rotate speed: 4500-5000rpm.
5. Hand held control, easy to operate; handle with contact switch design, safety to use
Delivery & Availability:
Typically 14-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped from Abroad
CryoIQ device is perfectly fitted for treatment of warts and other common skin lesions. Its unique construction with a built-in non-return valve prevents gas leakage thus giving a maximum use of the gas content. Areas of application are general practice, dermatology, pediatrics, podiatry, aesthetics, veterinary and gynecology/urology.
| Shipped from Abroad
The CryoPen B+ is designed to take our biggest N2O cartridges: 23.5g. Making it ideal for treating larger or deeper lesions and for infrequent use. It’s ideal for General Practitioners, Podiatrists and Veterinarians. CryoPen B+ is also suitable in a mixed medical or veterinary practice where several practitioners share the tools and want a variety of different devices.
| In stock
| ||||||||||||||||||||||||||||
| Content | Principle of Operation
How it works: HONKON's water oxygen cleanser fully combines oxygen and nutrient solution, and sprays water vapor mixed particles from the nozzle at a speed of 230m/s (similar to the spray form) to act on the skin. The fine particles with a diameter of about 50-80um (smaller than the diameter of the pores) clean the skin from the epidermis to the basal layer below the epidermis. If nutrients are added to the base liquid, the internal environment of the skin can be adjusted, which can replace manual skin care.Operating range: 1. Clean the epidermis of the skin 2. Hydrate and oxygenate the skin.Product advantages: The high-pressure gas is mixed with the nutrient solution through a stainless steel needle and sprayed out water vapor particles with a diameter of about 50μm at a speed of up to 230m/s. Oxygen pressure gauge, real-time pressure display. The gas output flow control system can adjust the gas output volume and gas output pressure according to different parts. It can be used with nutrient solution products to achieve better results. The liquid output flow control system can adjust the liquid output volume and liquid output pressure according to different parts, which is more targeted.Technical Parameters: Water mist particle speed: ≤230m/s Built-in air source output pressure: ≤0.8MPa Number of instruments: 4 Water mist particle diameter: ≤80um Gas source type: built-in gas source 5L gas tank Water oxygen pen: O-II Number of water oxygen pens: 2 Insurance specification: Max6A Power supply: AC220V±10%, 50HZ, AC110V±10%, 60HZ Gear: 1-2 gears adjustable, one gear step Accessories Details:
O—II Water Oxygen Pen
It is beautiful, easy to use, and can be repaired after damage, which reduces the user's cost of use; the deep cleaning effect is obvious; customers are advised to stock up on water oxygen pens O-Ⅱ type for emergencies.
| Portable Medical 365nm Woods Lamp for Skin AnalysisThe Wood's lamp test is done to help to detect several conditions affecting the skin, including: Bacterial infections, Fungal infections, Ectoparasites infestations, Skin coloring changes. Some skin diseases such as vitiligo, acne and host of other cause the skin to fluoresce Vitiligo, Bacterial Infections, eczema, Porphyria, Erythasma, Alopecia, Tinea Versicolor Fungus &Fungal Infections, Head Lice and their nits, fluoresce under black light Ringworm, Scabies, Child abuse/bruising can often be discerned with the wood's lamp. 1. Pigment abnormal skin disease 2. Infectious skin disease 3. erythroderma desquamativum 4. Neuropsychiatric disorders 5. Some metabolic skin diseases 6. diagnosis and definition of scope of skin lesions of certain tinea corporis and cruris,marla folliculitis disease 7. Certain metabolic skin disease Features: a. Observation Window+Shade Cloth, User can observe and take photos clearly in normal environment b. Rechargeable Lithium Battery, getting rid of the power cord, more convenient to carry and use, more suitable for home use c. UVA Light+White Light (LED), Low power consumption, long life. It is not only used for the examination of various skin diseases, but also can be used for other medical examination illumination. d. Eye-protecting Glass to avoid UV radiation on the human eye damage e. Adjustable Brightness f. Mobile Phone holder (Optional) Technical Specification:
| Electric DermatomeTechnical Parameters: 1. Skin Graft Thickness: 0-0.75 mm in 0.05 mm increment, the skin thickness adjusting button is unilateral adjustment, with high stability and no need calibrate to zero. 2. Skin Graft Width: 2.5~10.2cm,4 size width plates:2.5cm,5.1cm,7.6cm,10.2cm. Note: Special size width plate can be customized according to requirements. 3. The blade has self-lubricating function and is easy to load and unload. It can move back and forth smoothly to prevent metal to metal collision. 4. Original imported motor, low inertia electric motor will hardly produce any vibration when rotating, rotate speed: 4500-5000rpm. 5. Hand held control, easy to operate; handle with contact switch design, safety to use. 6. Exclusive design of pulled and plugged handle connection line, easy to use. (the length of handle connection line is greater than 3m) 7. Power supply: 220V±10% AC automatic switching, 150/60Hz single phase. Output 14.5V DC, 4.3A. 8. Degree of prevention of liquid entry: IPXO. 9. Sterilization Method: Sterilization Mode: pre-vacuum and gravity displacement steam sterilization or low temperature plasma sterilization can be conducted in whole machine and power cord. And the power cord can be pulled and plugged. | CryoIQ device is perfectly fitted for treatment of warts and other common skin lesions. Its unique construction with a built-in non-return valve prevents gas leakage thus giving a maximum use of the gas content. Areas of application are general practice, dermatology, pediatrics, podiatry, aesthetics, veterinary and gynecology/urology. The device uses a state-of-the-art cooling technology that does not require handling of potentially dangerous gases and liquids meaning that the gas cartridge is safely replaced when empty. The device features an ergonomic design where the cooling medium is evenly, accurately and economically distributed by depressing the metering lever.
Features:
| The CryoPen B+ is designed to take our biggest N2O cartridges: 23.5g. Making it ideal for treating larger or deeper lesions and for infrequent use. It’s ideal for General Practitioners, Podiatrists and Veterinarians. CryoPen B+ is also suitable in a mixed medical or veterinary practice where several practitioners share the tools and want a variety of different devices.
Supplied with 3 applicators:
|
| ||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||
| Additional information |
Reviews
There are no reviews yet.