12-removebg-preview
Lumbar-decompression-belt-01-removebg-preview
12-removebg-preview
Lumbar-decompression-belt-01-removebg-preview

Lumbar Traction Belt YGAH-9

Brands: Alphay

$0.00

Shipped From Abroad

Our patented ALPHAY Air Traction Belt YGAH-9 lumbar decompression belt helps to relieve lower back pain and restore the natural curvature of the lumbar on the principle of ergonomics. It can provide the complete comprehensive treatment of “ lumbar traction, vertebral recovery, curvature correction, lumbar spine shaping, and curvature recovery” at one time. It fundamentally eliminates the factors that cause the lumbar vertebrae problem to be repeated. It is a new way of rehabilitation.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Brands:: Alphay

Description

R&D Background

80% of adults experience back pain at some point in their lives.
Low-back pain is a remarkably common ailment among adults, in part because this area of the back is subject to a high degree of stress. Long hours sitting and long hours standing on hard surfaces can lead to back pain, as can congenital spinal conditions, over-straining the back, poor posture, trauma, or simply the wear and tear of aging.
Trauma, aging, and structural abnormalities present since birth can all lead to problems with your spine. In the vast majority of cases, these can be remedied with conservative non-surgical methods, possibly even with the help of a good back brace.
Back braces are used for healing an acute lumbar issue, such as a bulged/herniated disc or sciatica. Although back braces do not cure a condition, they are very useful in a treatment or” healing period”. Back braces are also worn for heavy physical activities if core muscles are not strong enough to support the activity.

Features:

1. Longitudinal pressure transmission technology
YGAH-9 injects air into the belt with an air pump, and the air column extends upwards to generate a strong traction support force to ease pressure on the spine.
The longitudinal pressure transmission technology design makes the air column stretch upward, which stretches the lumbar spine in a longitudinal state and extends the intervertebral disc space.

2. Ergonomic Design
The ergonomic design of YGAH-9 makes it perfectly fit the lumbar spine when inflated, which can allow the lumbar spine to maintain its natural curvature during stretching.
YGAH-9 is designed to be the opposite of C-shaped according to ergonomics, which can better reflect its supporting effect in principle.

3. Continuous Stretching
YGAH-9 lets the pressure of the upper body be transmitted to the lower limbs, but not the lumbar spine. During treatment, the lumbar spine is in a state of stretching and decompression, offering the lumbar spine a better recovery environment.

4. Stronger traction effects
The air pressure reaches 0.15MPa, which is stronger than most lumbar decompression belts’ traction effects on the market.
​​​​​​

5. Paddy surface material and air columns

6. Hand pump with many special designs
The hand pump is two-way inflatable, which can be fully charged in 15 times ( of course, it is not necessarily 15 times).
The connecting tape of the air nozzle prevents loss due to the memory problem of the elderly.
The air nozzle wrench can help to deflate quickly without rotating the nozzle. It can also be easily used to adjust the air leakage problem caused by long-term use.
The pressure limiting value is designed to prevent the explosion of the airbag. If over-inflated, it will automatically deflate.
There are two different hand pumps. The one with the gauge can show the inflation pressure dates.

7. Close-fitting Inner Material
100% cotton material, breathable.
It can be discreetly worn under clothing to perform daily activities such as driving, walking, and standing for long periods of time, enabling those with an active lifestyle to work, enjoy sports, and other leisure activities pain-free.

8. Lightweight design
YGAH-9 is lightweight, which is only about 300g, equivalent to the weight of a banana.

Reviews

There are no reviews yet.

Be the first to review “Lumbar Traction Belt YGAH-9”

Your email address will not be published. Required fields are marked *

Quick Comparison

Lumbar Traction Belt YGAH-9 removePhysiotherapy Tilt Table removeGround Control High Arch Insole removeDiabetic Trim to Fit removePropel + Carbon Performance Insoles removeBobath gymnastics table remove
NameLumbar Traction Belt YGAH-9 removePhysiotherapy Tilt Table removeGround Control High Arch Insole removeDiabetic Trim to Fit removePropel + Carbon Performance Insoles removeBobath gymnastics table remove
Image
SKUSF1033560130137-18SF1033560130135-18SF1033560130135-19SF1033560130135-17SF1033560130137-21
Rating
Price

$0.00

$0.00

$0.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionShipped From Abroad Our patented ALPHAY Air Traction Belt YGAH-9 lumbar decompression belt helps to relieve lower back pain and restore the natural curvature of the lumbar on the principle of ergonomics. It can provide the complete comprehensive treatment of “ lumbar traction, vertebral recovery, curvature correction, lumbar spine shaping, and curvature recovery” at one time. It fundamentally eliminates the factors that cause the lumbar vertebrae problem to be repeated. It is a new way of rehabilitation.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Therapy tilt tables and standing boards for the optimal treatment of diseases and injuries
Therapeutic tilt tables, also known as standing boards, can be used for various therapy methods. Among other things, they enable the patient to be raised up continuously from the shock or lying position to the almost vertical position. These models are therefore ideal for the treatment of neurological diseases as well as head and back injuries or paraplegic patients. In order to give the patient the physical and psychological safety required during treatment and when getting on and off, the combination of the upholstery cutout at the foot end with the extra-large, removable footboard was developed for the tilting tables. The therapy tilt tables are available in two widths:
  • Width 800 mm, Article No.: KT-1080/EE,
  • Width 1,000 mm, Article No.: KT-10100/EE.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Ground Control insole aims to reduce pronation with a decoupled heel while using hybrid impact and energy return zones to work with the foot, not against it. Designed for active individuals.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Spenco Diabetic insole was developed for people experiencing or are prone to experience diabetic neurophaties or neuropathic ulcers. These insoles feature a frictionless Plastazote® top cover for sensitive feet paired with impact protecting Polysorb® cushioning.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad Propel + Carbon Performance Insoles deliver explosiveness with each foot strike. Turn your everyday trainer into an elite race-ready shoe with the Propel + Carbon insole. Designed by biomechanical experts, this insole features a carbon plate for explosiveness with each foot strike and INergy™ Foam for next-level energy efficiency
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The gymnastics tables / Bobath tables are used in the therapeutic and nursing areas and provide the patient with the best possible support during the rehabilitation phase.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
R&D Background
80% of adults experience back pain at some point in their lives. Low-back pain is a remarkably common ailment among adults, in part because this area of the back is subject to a high degree of stress. Long hours sitting and long hours standing on hard surfaces can lead to back pain, as can congenital spinal conditions, over-straining the back, poor posture, trauma, or simply the wear and tear of aging. Trauma, aging, and structural abnormalities present since birth can all lead to problems with your spine. In the vast majority of cases, these can be remedied with conservative non-surgical methods, possibly even with the help of a good back brace. Back braces are used for healing an acute lumbar issue, such as a bulged/herniated disc or sciatica. Although back braces do not cure a condition, they are very useful in a treatment or” healing period”. Back braces are also worn for heavy physical activities if core muscles are not strong enough to support the activity.
Features:
1. Longitudinal pressure transmission technology YGAH-9 injects air into the belt with an air pump, and the air column extends upwards to generate a strong traction support force to ease pressure on the spine. The longitudinal pressure transmission technology design makes the air column stretch upward, which stretches the lumbar spine in a longitudinal state and extends the intervertebral disc space. 2. Ergonomic Design The ergonomic design of YGAH-9 makes it perfectly fit the lumbar spine when inflated, which can allow the lumbar spine to maintain its natural curvature during stretching. YGAH-9 is designed to be the opposite of C-shaped according to ergonomics, which can better reflect its supporting effect in principle. 3. Continuous Stretching YGAH-9 lets the pressure of the upper body be transmitted to the lower limbs, but not the lumbar spine. During treatment, the lumbar spine is in a state of stretching and decompression, offering the lumbar spine a better recovery environment. 4. Stronger traction effects The air pressure reaches 0.15MPa, which is stronger than most lumbar decompression belts’ traction effects on the market. ​​​​​​ 5. Paddy surface material and air columns 6. Hand pump with many special designs The hand pump is two-way inflatable, which can be fully charged in 15 times ( of course, it is not necessarily 15 times). The connecting tape of the air nozzle prevents loss due to the memory problem of the elderly. The air nozzle wrench can help to deflate quickly without rotating the nozzle. It can also be easily used to adjust the air leakage problem caused by long-term use. The pressure limiting value is designed to prevent the explosion of the airbag. If over-inflated, it will automatically deflate. There are two different hand pumps. The one with the gauge can show the inflation pressure dates. 7. Close-fitting Inner Material 100% cotton material, breathable. It can be discreetly worn under clothing to perform daily activities such as driving, walking, and standing for long periods of time, enabling those with an active lifestyle to work, enjoy sports, and other leisure activities pain-free. 8. Lightweight design YGAH-9 is lightweight, which is only about 300g, equivalent to the weight of a banana.
Features
  • The therapy tilt tables can be adjusted by electric motors from the vertical position (90°) to the horizontal position (0°). The tilting is controlled using a hand switch (alternatively, at no extra charge, with a foot switch).
  • The electromotive height adjustment (520 – 960 mm, measured in the horizontal upholstery position) is controlled via a foot switch (alternatively, at no extra charge, via a hand switch).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The wide support frame, which is equipped with a mobile base on retractable castors, ensures a high level of stability, even under stress.
  • The mobile base on retractable castors, swivel castors Ø 75 mm, locked in place using pedals are by pedals at the head and foot ends (step twice).
  • The thickness of the two upholstered segments (headrest and main surface) on the tilt tables are:
    • Article No.: KT-1080/EE, each 64 mm,
    • Article No.: KT-10100/EE, each 67 mm.
  • The headrest can adjusted up to +35° using a grid with 13 locking steps.
 
Technical data
Therapy tilt tables
Article number KT-1080/EE KT-10100/EE
Frame Lacquered
LengthHeadrest/main section 1,900 mm 500 / 1,400 mm
Width 800 mm (860 mm with standard rails) 1,000 mm (1,060 mm with standard rails)
Height adjustment 520 - 960 mm (electric motor)
Tilt adjustment 0º / +90º (electric motor)
Upholstery segments 2 sections
Upholstery thickness 64 mm 67 mm
Headrest adjustment +35°(grid)
Load capacity 130 kg
The standard configuration includes:
  • A pair of side-mounted surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 1,560 mm.
  • A removable footboard, dimensions 800 / 1,000 x 320 mm (W x D), frame plastic-coated, tread covered with synthetic leather.
  • The hand and foot switches.
  • A cutout at the foot of the main section to make getting on and off easier.
  • Substructure as a mobile base on retractable castors, swivel castors Ø 75 mm.
  • Floor protectors (clip-on caps) on the four adjustable feet.
  • An integrated protractor.
 
Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
P-2080/A P-20100/A Paper roll holder, for table width 800 mm. Paper roll holder, for table width 1,000 mm. With mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder rod (length 795 / 995 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PG-260

Patient belt, dimensions 2,600 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps)
The Spenco Ground Control insole, available in three arch heights for optimized support at fit. Aim to reduce pronation with a decoupled heel while using hybrid impact and energy return zones to work with the foot, not against it. Separating the heel from the arch support and forefoot reduces pronation during foot strike. Designed for active individuals. Ready, set, go.
  • Perforated EVA body
  • Nylon arch support
  • Polymer forefoot pad for energy return
  • Polymer heel pad for energy absorption
  • Anti-slip textured nylon fabric with Silpure Antimicrobial to reduce odor
  • Love Your Feet, fun colors hidden inside your shoe
  • Decoupled heel
Specifications
Body Part Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee
Condition Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain
Activity Golf, Running, Hiking, Sports, Walking, Cross Training, Prolonged Standing
Shoe Type Run, Walk, Sport Specific, Work, Boots
Arch Type High
The Spenco Diabetic insole is designed for people who are experiencing or who are prone to experience diabetic neurophaties or neuropathic ulcers. The top cover features Plastazote® foam which has anti-friction properties that help eliminate pressure points and prevent painful blisters. The soft arch design provides all-day support. Low-density Polysorb® memory structured foam allows for additional cushioning and impact-suppression, resulting in all-day comfort. It was also built with a deep heel cup to help stabilize the rearfoot, so whether you are standing or walking, your feet will thank you. This insole is designed for use in a variety of shoes, including athletic, work, and most casual styles. The Spenco Trim-To-Fit Diabetic insole is intended to fit womens shoe sizes 5-11 and may be trimmed as needed for a true custom fit. To trim, simply remove the existing insole from your shoe, line it up with your new Spenco Plantar Fascia insole as a guide and trace with a ballpoint pen. Carefully cut with a sharp pair of scissors, then insert into your shoe with the top side up
  • Plastazote® foam top cover reduces friction and cushions sensitive feet
  • Polysorb® Memory Structured foam provides cushioning, impact suppression, and all-day comfort
  • Soft arch design provides all-day support
  • Developed specifically for those affected by Diabetes and foot discomfort
  • Trim-To-Fit sizing fits most shoe types and foot sizes
Specifications
Weight 0.35
Body Part Lower Back, Knee
Activity Walking
Spenco® Propel™ + Carbon Performance Insoles deliver explosiveness with each foot strike. Turn your everyday trainer into an elite race-ready shoe with the Spenco® Propel™ + Carbon insole. Designed by biomechanical experts, this insole features a carbon plate for explosiveness with each foot strike and INergy™ Foam for next-level energy efficiency
  • Carbon Plate provides forward propulsion and explosiveness with each foot strike
  • Responsive Energy Foam cushioning creates next-level energy efficiency
  • Contoured and supportive heel cup
  • Includes 1 pair of insoles
Weight 0.46
Body Part Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee
Condition Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain
Activity Golf, Running, Hiking, Sports, Walking, Cross Training, Prolonged Standing
Shoe Type Run, Walk, Sport Specific, Work, Boots
Arch Type Medium
Bobath gymnastics tables
The Bobath gymnastics tables are an aid in the “Bobath concept”, which is used successfully worldwide and is used to rehabilitate people with diseases of the central nervous system. These are often accompanied by movement disorders, symptoms of paralysis and spasticity. A special table makes the treatments and therapeutic measures easier. In order to simplify these individual and everyday therapeutic activities for patients and users, the Bobath tables from AGA Sanitätsartikel are all equipped with a height adjustment mechanism as follows:
  • Manual (hand crank), Article No.: H-Bobath/H 110,
  • Hydraulics, Article No.: H-Bobath/Y 110, H-Bobath/Y 120 and H-Bobath/Y 160,
  • Electric motor, Article No.: H-Bobath/E 110, H-Bobath/E 120 and H-Bobath/E 160.
In addition, the Bobath gymnastics tables are available in three widths, 1,040 mm, 1,200 mm and 1,600 mm.
Features
  • In order to avoid rocking and swinging movements of the lying surface, the gymnastics tables are manufactured with a 200 mm stroke and precision double square profiles.
  • The Bobath tables with scissor adjustment mechanisms are characterized by the large adjustment range (420 mm) and the resulting low entry height (525 mm).
  • The manual height adjustment is done with a hand crank using maintenance-free gear with an optimal transmission ratio (i = 10mm/rev) for smooth, quick and easy operation, without much effort, even with heavier patients (up to 200 kg). After use, the crank handle can be pushed back under the tabletop.
  • The hydraulic height adjustment is operated via the built-in foot pump. The height adjustment can of course also be carried out with heavier patients (up to 200 kg) without any major effort. In order to be able to operate the hydraulics from both sides, it is possible to install an additional foot lever. This is available for an additional charge (Article No.: FPH-10).
  • The electric motor height adjustment is controlled via a foot switch (alternatively - at no extra charge - via a hand switch) and can of course also be done with heavier patients (up to 200 kg). The electric drive used is maintenance-free and extremely quiet. The adjustment system is equipped with a key lock. Motor connection values: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The 70 mm thick, one-piece and continuous comfort padding offers the patient a high level of comfort. As standard, it is equipped with 2-layer foam cuts with different thicknesses in terms of density - which also enclose the wooden support panel on the side (20 mm thick) - and is covered with high-quality synthetic leather.
  • The 1,600 mm wide Bobath gymnastics have a seam in the middle of the upholstered cover.
 
Technical data
Bobath tables with precision double square profiles
Article number H-Bobath/H 110  H-Bobath/Y 110 H-Bobath/E 110
Frame Lacquered
Length 1,940 mm
Width 1,040 mm
Height adjustment 650 - 850 mm (hand crank) 650 - 850 mm (hydraulics) 650 - 850 mm (electric motor)
Upholstery segments 1 section
Upholstery thickness 70 mm
Load capacity 200 kg
Bobath tables with scissor adjustments
Article number H-Bobath/Y 120 H-Bobath/Y 160 H-Bobath/E 120 H-Bobath/E 160
Frame Lacquered
Length 1,940 mm
Width 1,200 mm 1,600 mm 1,200 mm 1,600 mm
Height adjustment 525 – 945 mm (hydraulics) 525 – 945 mm (electric motor)
Upholstery segments 1 section
Upholstery thickness 70 mm
Load capacity 200 kg
The standard configuration includes:
  • Levelling feet on the chrome-plated crossbars of the Bobath tables with precision double square profiles.
  • Floor protectors (clip-on caps) on the four adjustable feet of the Bobath tables with scissor adjustments.
 
Accessories & additional options
Article No. Description
FPH-10 Foot pedal, with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides.
HRM-14 Semi-circular roll, foam filling, dimensions Ø 200 x 400 mm, sewn from synthetic leather, with zipper, see upholstery colours.
KKM-16 Head wedge, foam filling, dimensions 450 x 400 x 80 / 10 mm (L x W x H), sewn from synthetic leather, with zipper, see upholstery colours.
LR/Z-125 Central locking castor system, double swivel castors Ø 125 mm,  all four castors offer excellent rolling properties and are connected to each other by rods, foot pedals are arranged diagonally at the head and foot end, easy to operate and with coloured markings (green = table ready for moving, red = table locked in place). Retrofitting is not possible.
RLM-20 RM-12 Knee roll, dimensions Ø 180 x 560 mm. Neck roll, dimensions Ø 140 x 400 mm. Round roll, foam filling, sewn from synthetic leather, with zipper, see upholstery colours.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information

Related products

dl6efjmfvmvmd2hmkssf_1_1
trmlkhrfzfydkr9uxaqy_1_1
Read more
Add to wishlist
Physiotherapy

Propel Performance Insoles

$0.00
blcdrezpoyj3gr1prb8c_1_1
enz0pzi7knremefrbtm6_1_1
Read more
Add to wishlist
Physiotherapy

Medics Diabetic+ Insol

$0.00
eglxy4babfvfjmyrjukf_1_1
w
Read more
Add to wishlist
Physiotherapy

Full Length Plantar Fascia Insole

$0.00
mb
Read more
Add to wishlist
Medical Furniture

AGA-THERA Therapy Table

$0.00
DVT pump
Read more
Add to wishlist
Medical Equipment

Deep Vein Thrombosis DVT-7700

$0.00
m8htdyhhlikekbruarwd_1_1
btcnzhtpjqwd0owgivjh_1_1
Read more
Add to wishlist
Physiotherapy

Gel Comfort Insole

$0.00
yh8ljnriav6tmvihclen_1_1
a3hnpkderacyb4ukmkoy_1_1
Read more
Add to wishlist
Physiotherapy

Total Support Max Insole

$0.00
mm55cbiiodye8ohuhss1_1_1
dlqpgkorvgmni8pp1ocd_1_1
Read more
Add to wishlist
Physiotherapy

Ground Control Low Arch Insole

$0.00
ll
Read more
Add to wishlist
Medical Furniture

Physiotherapy Tilt Table

$0.00
Copyright Halomedicals© 2025. All rights reserved.
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare