Propel + Carbon Performance Insoles

• In order to avoid rocking and swinging movements of the lying surface, the gymnastics tables are manufactured with a 200 mm stroke and precision double square profiles.
• The Bobath tables with scissor adjustment mechanisms are characterized by the large adjustment range (420 mm) and the resulting low entry height (525 mm).
• The manual height adjustment is done with a hand crank using maintenance-free gear with an optimal transmission ratio (i = 10mm/rev) for smooth, quick and easy operation, without much effort, even with heavier patients (up to 200 kg). After use, the crank handle can be pushed back under the tabletop.
• The hydraulic height adjustment is operated via the built-in foot pump. The height adjustment can of course also be carried out with heavier patients (up to 200 kg) without any major effort. In order to be able to operate the hydraulics from both sides, it is possible to install an additional foot lever. This is available for an additional charge (Article No.: FPH-10).
• The electric motor height adjustment is controlled via a foot switch (alternatively - at no extra charge - via a hand switch) and can of course also be done with heavier patients (up to 200 kg). The electric drive used is maintenance-free and extremely quiet. The adjustment system is equipped with a key lock. Motor connection values: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
• The stability and robustness is achieved by the gusset plates in the frame corners.
• The 70 mm thick, one-piece and continuous comfort padding offers the patient a high level of comfort. As standard, it is equipped with 2-layer foam cuts with different thicknesses in terms of density - which also enclose the wooden support panel on the side (20 mm thick) - and is covered with high-quality synthetic leather.
• The 1,600 mm wide Bobath gymnastics have a seam in the middle of the upholstered cover.

• The therapy tilt tables can be adjusted by electric motors from the vertical position (90°) to the horizontal position (0°). The tilting is controlled using a hand switch (alternatively, at no extra charge, with a foot switch).
• The electromotive height adjustment (520 – 960 mm, measured in the horizontal upholstery position) is controlled via a foot switch (alternatively, at no extra charge, via a hand switch).
• The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
• The wide support frame, which is equipped with a mobile base on retractable castors, ensures a high level of stability, even under stress.
• The mobile base on retractable castors, swivel castors Ø 75 mm, locked in place using pedals are by pedals at the head and foot ends (step twice).
• The thickness of the two upholstered segments (headrest and main surface) on the tilt tables are:
  • Article No.: KT-1080/EE, each 64 mm,
  • Article No.: KT-10100/EE, each 67 mm.
• The headrest can adjusted up to +35° using a grid with 13 locking steps.

• The main components of the frame are made of anodized aluminium profiles.
• The head section is adjusted using a grid of +30°.
• The load capacity is 250 kg and the weight is 16 kg.
• The dimensions when folded, as a suitcase, are 960 x 580 x 140 mm.
• The thickness of the three upholstery segments (head, middle and leg sections) is 30 mm each.
• There is a face cutout in the headboard upholstery.
• The AGA-KOBAFLEX portable massage tables is available in heights of 660, 720 and 780 mm. The number in the article reference indicates the respective height of the table in centimeters (66, 72 and 78 cm).

Characteristics