Smart-RO-Series
/

Smart-RO Water Purification System

Brands: Hi-Tech

$0.00

Shipped From Abroad

An economical choice of primary pure water for daily laboratory cleaning, with an hourly water output of 15-30 liters, ion retention rate >97%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the water requirements for routine laboratory ware cleaning and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130126-1
Brands:: Hi-Tech

Description

Technical Parameters
Product Model Smart-RO15 Smart-RO30
Pure water output* 15L/Hour 30L/Hour
Instantaneous water output** Up to 2.0L/Min (when there is water in the water tank)
RO reverse osmosis water indicators
 Ion retention rate 97%-99% (when using new RO membrane)
 Organic matter retention rate >99%, when MW>200 Daltons
 Particle and bacteria retention >99%
 bacteria <0.01 cfu/ml (optional (0.45+0.1)μm imported PES terminal filter)
 Particles (>0.2μm) <1/ml (optional (0.45+0.1)μm imported PES terminal filter)
Raw water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ cm2
Instantaneous water output 2.0L/min (pressure water bucket required)
Water outlet 1: RO reverse osmosis water
Dimensions/weight Length × width × height: 41 × 22 × 42 cm / about 20 kg
Electrical requirements 100-240V, 50/60Hz
power 48W 72W
System Configuration Main unit (including 1 set of purification column) + 15L pressure water bucket + TDS/conductivity test pen + accessory bag
Consumables Information
Part Number/Model Product Name Service life/root (estimated)
PC-M-PP 5μmPP depth filter element About 2-6 months
PC-PP-ZK Zikang PP filter element About 2-6 months*
PC-AC-B-ZK Zikang activated carbon filter About 4-6 months*
PTC-AC-HZS1 Organic matter purification column About 6800 liters of pure water
RO-100GPD 100GPDRO membrane About 1-2 years
RO-200GPD 200GPDRO membrane About 1-2 years
PTC-MBR-K Deionization purification column (imported resin) About 1000 liters of pure water/column
PTC-UPPR-K Ultrapure water column (imported resin) About 1000 liters of pure water/column
TF-(0.45+0.1)μm-S (0.45+0.1)μm imported PES terminal filter –
UF-5000D MWCO5000DUF ultrafiltration component (original imported) –
UV-(185nm&254nm)-10W-K Dual wavelength (185nm & 254nm) UV lamp assembly (imported) –
LAMP-(185nm&254nm)-10W-K Dual wavelength (185 & 254nm) UV lamp (imported) About 9000 hours
UV-254-10W-K 254nmUV ultraviolet lamp assembly (imported lamp tube) –
LAMP-254-10W-K 254nm UV lamp (imported) About 9000 hours

Reviews

There are no reviews yet.

Be the first to review “Smart-RO Water Purification System”

Your email address will not be published. Required fields are marked *

Quick Comparison

Smart-RO Water Purification System removeVENUS SOLO OEM SENSOR removeBistos BT- 720 Patient Monitor removePERSONAL CO2/O2 MONITOR-SUB-ASPIDA removePilot-RO Water Purification System removeSuper-Full Touch Screen Water Purification System remove
NameSmart-RO Water Purification System removeVENUS SOLO OEM SENSOR removeBistos BT- 720 Patient Monitor removePERSONAL CO2/O2 MONITOR-SUB-ASPIDA removePilot-RO Water Purification System removeSuper-Full Touch Screen Water Purification System remove
ImageBistos BT-720 Patient Monitor
SKUSF1033560130126-1SF1033560130141-15SF1033560059-8SF1033560130141-13SF1033560130126-2SF1033560130126-3
Rating
Price

$0.00

$0.00

$330.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

Read more

Read more

Add to cart

Read more

Read more

Read more

DescriptionShipped From Abroad An economical choice of primary pure water for daily laboratory cleaning, with an hourly water output of 15-30 liters, ion retention rate >97%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the water requirements for routine laboratory ware cleaning and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad
Key Features
  • Single gas (user defined)
  • Backward compatible with ADC’s ‘Eclipse’
  • Linearised Output
  • Continuous status signal to check device health
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from abroad Bistos BT - 720 Patient Monitor: Bistos Portable Patient Vital Signs Monitor, SpO2, Pulse, *NIBP, BT-720. The Bistos BT-720 is a compact size vital signs monitor with the standard parameters of SpO2 and Pulse. You can also add the NIBP and/or Masimo SpO2 at an additional cost. The BT-720 has a 4.3" color touch screen The PC software allows the vital signs information to be transferred and analyzed on a computer. Delivery & Availability: Typically 7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped From Abroad
Key features
  • It is the only portable monitor to be pressure corrected ensuring no false readings are given
  • The Sub Aspida is compact in size (127 x 44 x 90mm LxDxW)
  • The oxygen (O2) sensor can be calibrated on air, reducing costly gas requirements and making you self sufficient in the maintenance of the sensor
  • The carbon dioxide (CO2) sensor only needs calibrating every 12 months
  • OLED (Organic Light Emitting Diode) display
  • Pressure compensated CO2 & O2 sensors
  • Rechargeable battery-operated (NiMH)
  • Datalogging
  • Man-down alarm
  • Can offer continuous monitoring or spot checking
  • Audio, visual and vibration alarms
  • TWA (Time Weighted Average) Alarm
  • User maintainable
  • Can be worn on the belt or clipped to a panel
  • Pressure range of 700-1200mbara
  • Maintenance reminders as standard
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Super series uses city tap water as the water source, and can easily and quickly produce secondary RO (reverse osmosis) water, EDI deionized water and UP ultrapure water. It uses a standard two-stage reverse osmosis system and Ionpure EDI technology and modules to continuously produce Class II pure water with a TOC of more than 10MΩ.cm (25℃) and <30ppb, and ultrapure water of 18.2MΩ.cm (25℃). System water output: 10 liters/hour, and the daily output of pure water can reach 240 liters.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Technical Parameters
Product Model Smart-RO15 Smart-RO30
Pure water output* 15L/Hour 30L/Hour
Instantaneous water output** Up to 2.0L/Min (when there is water in the water tank)
RO reverse osmosis water indicators
 Ion retention rate 97%-99% (when using new RO membrane)
 Organic matter retention rate >99%, when MW>200 Daltons
 Particle and bacteria retention >99%
 bacteria <0.01 cfu/ml (optional (0.45+0.1)μm imported PES terminal filter)
 Particles (>0.2μm) <1/ml (optional (0.45+0.1)μm imported PES terminal filter)
Raw water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ cm2
Instantaneous water output 2.0L/min (pressure water bucket required)
Water outlet 1: RO reverse osmosis water
Dimensions/weight Length × width × height: 41 × 22 × 42 cm / about 20 kg
Electrical requirements 100-240V, 50/60Hz
power 48W 72W
System Configuration Main unit (including 1 set of purification column) + 15L pressure water bucket + TDS/conductivity test pen + accessory bag
Consumables Information
Part Number/Model Product Name Service life/root (estimated)
PC-M-PP 5μmPP depth filter element About 2-6 months
PC-PP-ZK Zikang PP filter element About 2-6 months*
PC-AC-B-ZK Zikang activated carbon filter About 4-6 months*
PTC-AC-HZS1 Organic matter purification column About 6800 liters of pure water
RO-100GPD 100GPDRO membrane About 1-2 years
RO-200GPD 200GPDRO membrane About 1-2 years
PTC-MBR-K Deionization purification column (imported resin) About 1000 liters of pure water/column
PTC-UPPR-K Ultrapure water column (imported resin) About 1000 liters of pure water/column
TF-(0.45+0.1)μm-S (0.45+0.1)μm imported PES terminal filter -
UF-5000D MWCO5000DUF ultrafiltration component (original imported) -
UV-(185nm&254nm)-10W-K Dual wavelength (185nm & 254nm) UV lamp assembly (imported) -
LAMP-(185nm&254nm)-10W-K Dual wavelength (185 & 254nm) UV lamp (imported) About 9000 hours
UV-254-10W-K 254nmUV ultraviolet lamp assembly (imported lamp tube) -
LAMP-254-10W-K 254nm UV lamp (imported) About 9000 hours
Description
The Venus Solo OEM sensor is a self-contained unit designed for integration into other manufacturers’ equipment and provides a measurement of gas concentration according to specific user requirements. These GFC (Gas Filter Correlation) sensors generate a signal proportional to the infrared absorption of the measured gas. Providing the gas concentration lies within the designed range of the sensor, the signal is periodically compared with a reference gas. Gas concentrations are indicated through the non-linearised analogue signal output. Gas connections to and from the sensor are via suitable fittings on the gas measuring cell. The Venus Solo OEM Series sensors electrical supply is designed to accept 24V DC (3amp max). Our Venus Solo OEM sensor uses GFC (Gas Filter Correlation) technology to give highly accurate gas measurements. The Venus Solo can be integrated into your own gas analyzer or management system and offers the user a 0-2.5v analogue output.

The sensor is currently available as either: Carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N20), methane (CH4) or nitric oxide (NO). If your application requires a different gas, just let us know and we can customise it to your needs. The Venus Solo is used in Military applications to protect submariners from carbon monoxide (CO) exposure.  

Technical Specification
Venus Solo
Operating Temperature Range 5°C to 40°C
Ambient Humidity 0 to 95% RH, non condensing
System Warm-up Time 30-60 minutes (dependant on gas)
Power Requirements 24V DC +/- 10%, Max current 3A, Nominal current 600mA (after warm up)
Outputs 4-20mA, RS232, relays
Response Time (T90) Between 10-90 secs (dependant upon gas cell length) at flow rate of 500ml/minute
Intrinsic Accuracy +/- 0.2% of full scale
Sensor Technology Gas Filter Correlation
Gas PPM Ranges
Gas Type 10 PPM 20 PPM 50 PPM 100 PPM 200 PPM 500 PPM 1000 PPM 2000 PPM 5000 PPM
Carbon Dioxide (CO2) ✓ ✓ ✓ ✓ ✓ ✓
Carbon Monoxide (CO) ✓ ✓ ✓ ✓ ✓ ✓
Methane (CH4) ✓ ✓ ✓ ✓ ✓
Nitrous Oxide (N20) ✓ ✓ ✓ ✓ ✓ ✓ ✓
Gas % Ranges
Gas Type 1% 5% 10% 20% 50% 100%
Carbon Dioxide (CO2) ✓ ✓ ✓ ✓ ✓
Carbon Monoxide (CO) ✓ ✓ ✓ ✓ ✓
Methane (CH4) ✓ ✓ ✓ ✓ ✓ ✓
Nitrous Oxide (N20) ✓ ✓ ✓ ✓ ✓ ✓
Click here to download Data Sheet
Click here to download Operational Manual
Bistos BT - 720 Patient Monitor: Bistos Portable Patient Vital Signs Monitor, SpO2, Pulse, *NIBP, BT-720. The Bistos BT-720 is a compact size vital signs monitor with the standard parameters of SpO2 and Pulse. You can also add the NIBP and/or Masimo SpO2 at an additional cost. The BT-720 has a 4.3" color touch screen The PC software allows the vital signs information to be transferred and analyzed on a computer. Features:
  • 3" color touch screen
  • Standard Confirgurations: SpO2 and Pulse
  • Optioal NIBP and Masimo SpO2
  • Short/long trend graphic/trend table display
  • Audio and visual alarm, adjustable alarm limit
  • Automatic brightness adjustment
  • Accurate SpO2 reading during motion or low perfusion
  • Perfusion index data / bar graphic display
  • Pitch tone variation for pulse rate
  • Internal memory for data storage
  • SD card for easy software upgrade
  • Over 8 hours of operation with the re-chargeable li-ion battery
  • PC software for data review and analysis on a computer
  Technical Specifications:
Model BT-720
Display 4.3" Color LCD Touch Screen
SpO2 Measurement Range 0-100%
Accuracy (70-100%) Adult/Pediatric +/- 2%
Neonate +/- 3%
Accuracy (0-69%) Unspecified
Perfusion Index 0.05-20%
Pulse Rate Range (bpm) 25-250
NIBP* (Optional) Method Automatic Oscillometric
Operation Mode Manual/Automatic/STAT
Parameter Systolic/Diastolic/Mean
Systolic Range (mmHg) Adult 40-270
Pediatric 40-200
Neonate 40-130
Diastolic Range Adult 100-210
Pediatric 100-160
Neonate 10-90
Mean Range Adult 20-230
Pediatric 20-175
Neonate 20-100
SpO2 Masimo* (Optional) Masimo SpO2
Battery Type (Capacity) Li-ion (4400mAh)
Run time 8 Hours
Charging Time 8 Hours
Interface RJ45, SD Card Slot
Warranty 2 Years
 
Click Here To Download Catalogue
 
Description
The Sub Aspida is a personal, portable monitor which is used to detect levels of carbon dioxide (CO2) and oxygen (O2) in pressurized environments.
CO2 monitoring & O2 monitoring with the Sub Aspida
Unlike industrial sensing monitors, the Sub Aspida was designed with pressure corrected sensors, giving you 100% confidence in your readings. The Sub Aspida has been upgraded to support those who work at high altitude. Pressure tested to 10,000 ft or 700 MB, the Sub Aspida will remain accurate and reliable when monitoring CO2 and O2 in the atmosphere, meaning you can concentrate on the job at hand!  
Technical Specification
    SUB-ASPIDA
    Operating temperature 0°C to +50°C
    Operating pressure 700 to 1200 mbara
    Humidity Range 0 to 99% RH
    Display High-visibility, Organic Light Emitting Diode (OLED) display
    Alarm horn 95dB @ 30cm
    LED indicators 1 x Green - OK, 1 x Amber - Fault, 1 x Red - Alarm
    Internal data log 1 log every 30 seconds for at least 7 days of continuous use
    Batteries 2 x NiMH 2100mAh AA batteries (or suitable AA type batteries)
    Battery discharge time 12 hours under normal operation (Passive atmospheric monitoring, minimal user interaction, no alarms)
    Battery lifespan 2 years
    Battery charge time 4.5 hours (from flat)
    Charge power supply rating 9 V DC - 0.55A, DC jack 5.5x12.0x2.1mm centre +ve
    Electronics warranty 2 years
    IP rating IP65
    Dimensions 127 x 44 x 90 mm / 5 x 1.7 x 3.5 inches (LxDxW)
    Weight 335g/11.8oz , O2 350g/12.3oz, CO2 335g/11.8oz
    SENSORS
    CO2 Sensor Unit O2 Sensor Unit
    Sensor type Analox infrared MIR Electrochemical
    Accuracy (at standard temperature and pressure) ±(1% of full scale + 2% of reading) ±1% of full scale (For best performance, calibrate the Sub Aspida while on battery power only.)
    Range 0.01 to 50.0 mbar ppCO2 (0.01 to 5% at 1000 mbara) 0.1 to 2000.0 mbar ppO2 (0.1 to 100% O2 at 1000 mbara)
    Response time T90 <60 seconds T90 <30 seconds
    Sensor life span 5 years 1 year (expected)
     
     
    		An economical choice of primary pure water for daily laboratory cleaning , with a water output of 45 - 180 liters per hour, ion retention rate >98%, organic matter retention rate >99% (when MW >200 Daltons), particle and bacteria retention rate >99%, which can meet the requirements of conventional production process water and laboratory utensil cleaning water, and can be used as the inlet water for ultrapure water systems, high-pressure steam sterilizers, environmental test chambers and other instruments
    Technical Parameters
    Product Model Pilot-RO45 Pilot-RO63 Pilot-RO90 Pilot-RO120 Pilot-RO180
    Pure water output* 45L/Hour 63L/Hour 90L/Hour 120L/Hour 180L/Hour
    RO reverse osmosis water indicators
     Ion retention rate 98%-99% (when using new RO membrane)
     Organic matter retention rate >99%, when MW>200 Daltons
     Particle and bacteria retention >99%
     bacteria <0.01 cfu/ml (optional 0.2μm imported PES terminal filter)
     Particles (>0.2μm) <1/ml (optional (0.2μm imported PES terminal filter)
    Raw water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/ cm2
    Size and weight Length × width × height: 640 × 540 × 1110mm; Weight: about 70Kg
    Electrical requirements 220V, 50/Hz
    power 120W 120W 240W 240W 240W
    System Configuration Main unit (including 1 set of purification column) + 2 built-in 15L pressure water buckets + TDS/conductivity test pen + accessory bag
    Performance characteristics
    • New 7.0-inch color touch screen

    The new 7-inch color 16:9 widescreen high-resolution full touch screen control system provides a new fingertip touch operation experience.

    • 4-channel water quality and 3-channel flow monitoring on the host

    Source water, secondary RO water, EDI deionized water, UP ultrapure w

    • The lab optimized standard two-stage reverse osmosis system

    The use of dual pumps, dual membranes and transition water tanks reduces system energy consumption and wastewater, ensuring stable water quality under different source water conditions.

    ater, 4-way water quality online monitoring and water quality exceeding standard alarm function.

    1-way source water flow statistics, EDI deionized water and UP ultrapure water 2-way high-precision quantitative water extraction function.

    • Standard-50L PE pure water tank

    The polyethylene pure water tank with conical bottom design contains an air filter, which can effectively absorb CO2, organic matter and filter bacteria and particles, and can be equipped with UV ultraviolet irradiation sterilization components.

    Features and Advantages
    • Built-in 3-pump system with primary and secondary RO booster pumps and circulation disinfection pumps to achieve complete two-stage reverse osmosis, system circulation and disinfection functions
    • Full-level filter element alarm prompt function based on time and flow, showing the used and remaining life of consumables
    • Automatic detection and alarm functions such as system water shortage alarm, water tank full alarm, water quality exceeding standard alarm, consumable life end alarm, water leakage protection alarm, etc. provide safety guarantee
    • Fully automatic RO membrane anti-scaling flushing program (flushing interval and duration can be set) to extend the service life of the RO membrane
    • Built-in SD card, can store and view operation data charts and curves, and can be inserted into a USB flash drive for complete data export, providing data traceability
    • With USB interface system program upgrade function, and optional WIFI module
    • Built-in perpetual calendar clock, convenient for consumables management and service settings
    • Ultrapure water full pipeline dosing disinfection function, just add disinfection tablets to start the one-key disinfection program to ensure high-quality pure water
    • Ultrapure water circulation function, which can be started and shut down freely to maintain low bacterial contamination level in the system
    • Factory and customer secondary passwords, system parameter settings are all password protected to prevent unauthorized changes
    • Compatible with 2 pure water storage methods of pressure water barrels to meet different application needs
    • High-strength all-engineering plastic chassis, ergonomic design, beautiful appearance, no corrosion and rust, ensure the cleanliness of the machine body, in line with GLP specifications
    • Unique 4-door design, pretreatment, RO and ultra-purification components, EDI and TOC modules, water tanks and control components adopt independent modular structures, making system maintenance more convenient
    • Pipes and joints are NSF certified to minimize TOC precipitation in the system and ensure the highest pure water quality
    • Powerful pre-treatment components, combined with 5μm PP transparent filter, KDF composite filter, coconut shell water-washing grade precision activated carbon filter, effectively protect the RO membrane
    • DOW RO reverse osmosis membrane, RO membrane components optimized by The lab, achieve the combination of long life, stability and high desalination rate of RO membrane
    • The new integrated ultra-purification component of DOW resin ensures that the water produced reaches 18.2MΩ.cm and reduces TOC precipitation
    • Ultra-long life 254&185nm dual wavelength UV lamp, combined with medical grade 316L flow hood, effectively sterilizes, reduces TOC, and enhances the system's application range
    • UF ultrafiltration components, molecular weight cut-off: MWCO5000D, effectively remove pyrogens/endotoxins, can be used for precision cell culture and IVF
    • Double-layer terminal sterilizing filter, accuracy: (0.45+0.1)μm, using PES polyethersulfone composite filter membrane, double-layer filtration design to ensure the terminal effluent is sterile
     
    Technical Parameters
    name Basic Heat removal prototype Low organic matter type Comprehensive Built-in TOC monitor
    model Super 10 Super 10F Super 10V Super 10FV Super-TOC10V Super-TOC 10FV
    Pure water output 10 L/hour
    Ultrapure water output Up to 2.0L/min (when there is water in the water tank)
    Ultrapure water index
    Resistivity (25℃) 18.2MΩ.cm
    Total Organic Carbon TOC* <10ppb <10ppb <3ppb <3ppb <3ppb <3ppb
    bacteria <0.01cfu/ml
    Particles (>0.1μm) <1/ml
    Pyrogens/endotoxins N/A <0.001Eu/ml N/A <0.001Eu/ml N/A <0.001Eu/ml
    RNases N/A <1pg/ml N/A <1pg/ml N/A <1pg/ml
    Deoxyribonucleases (DNases) N/A <5pg/ml N/A <5pg/ml N/A <5pg/ml
    Pure water index
    Resistivity* >5MΩ.cm
    Total Organic Carbon (TOC)* <30ppb
    Silicon Rejection Rate >99.9%
    Source water requirements Urban drinking tap water, water temperature 5-45℃, water pressure 1.0-4.0Kgf/cm2
    Size and weight Length × width × height: 545 × 470 × 649 mm, weight: about 35 kg
    Electrical requirements 220-240V, 50/60Hz
    power 240W
    System Configuration Host (including 1 set of purification column) + TOC monitor (TOC type) + 50L PE ultrapure water storage tank
       
    WeightN/AN/AN/AN/AN/AN/A
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information

    Related products

    ghh
    Read more
    Add to wishlist
    Health Education

    PERSONAL CO2/O2 MONITOR-ASPIDA

    $0.00
    Ultra-Pure-Water-Purification-System-for-Science-Applications
    Read more
    Add to wishlist
    Health Education

    Super-Full Touch Screen Water Purification System

    $0.00
    CO2BUDDY_01_0-1536x1536
    Read more
    Add to wishlist
    Health Education

    LIGHTWEIGHT PERSONAL CO2 ALARM

    $0.00
    images (2)
    Read more
    Add to wishlist
    Health Education

    Full Touch Screen Water Purification System

    $0.00
    TEC-CO_01-1
    Read more
    Add to wishlist
    Scientific & Medical Education

    LOW LEVEL CARBON MONOXIDE MONITOR

    $0.00
    Oxygen-Concentrator-7F-3-
    Add to cart
    Add to wishlist
    Accident & Emergency

    Oxygen Concentrator

    $350.00
    Littmann Classic III Stethoscope
    Add to cart
    Add to wishlist
    Accident & Emergency

    Littmann Classic III Stethoscope

    $34.00
    DAMS_PLC_FORE_01
    DAMS_PLC_AFT_01_1-1536x1536
    Read more
    Add to wishlist
    Health Education

    DISTRIBUTED ATMOSPHERE MONITORING SYSTEM

    $0.00
    trtk
    Read more
    Add to wishlist
    Chemistry-Experiments

    PORTABLE OXYGEN MONITOR

    $0.00
    Copyright Halomedicals© 2024. All rights reserved.
    Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
    • Image
    • Rating
    • Price
    • Description
    Click outside to hide the comparison bar
    Compare