Vertical Pressure Steam Sterilizer- Internal Circulation Drying

Vertical Pressure Steam Sterilizer Features:

1. Hand wheel translation and quick opening structure
2. High quality stainless steel material
3. With drying function
4. Microcomputer automatic control, arbitrary setting sterilization parameters
5. Safety interlocking device
6. Digital display and Touch buttons
7. Standard test interface
8. Self-expanding seal
9. With automatic protection function: Over temperatureprotection; over pressure self discharge protection; low water level protection; anti dry burning.
10. With stainless steel bucket or basket
11. Buzzer reminder after sterilization, automatic stop
12. Automatic discharge of cold air, automatic steamexhaust after sterilization,Internal steam cycle.

Specifications:

• Optional external printer
• Optional automatic water

• Observation mode: Brightfield.
• Head: Binocular, 30° inclined; 360° rotating.
• Dioptric adjustment: Left eyepiece.
• Eyepiece: WF10x/18 mm, secured by screw
• Nosepiece: Quadruple ball bearings revolving nosepiece, reversed.
• Objectives: – Achromatic 4x/0.10, with anti-fungus treatment – Achromatic 10x/0.25, with anti-fungus treatment – Achromatic 40x/0.65, with anti-fungus treatment – Achromatic 100x/1.25 (oil), with anti-fungus treatment
• Specimen stage: StagErase™ eraseable mechanical stage, 125×125 mm, 62×24 mm X-Y movement range. Vernier scale on the two axes, accuracy: 0.1 mm.
• Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
• Condenser: Abbe N.A. 1.25, pre-centered, focusable, with iris diaphragm.
• Illumination: 1 W LED, with brightness control, rechargeable batteries.
• Color temperature: 6,300 K. Multi-plug 100-240Vac/5Vdc external power supply.

• The device is used to heat chemicals used in laboratories without being exposed to open flame.
• Glass wool is used as insulation material in the device.
• Since there is no heater or pump in the chamber, there is no loss in net volume.
• The device provides precise temperature measurement thanks to its microprocessor control.
• Additional security measures have been taken against overheating with the safety thermostat that can be adjusted between 30-90 degrees.
• There is a drainage system for the discharge of excess water in the device.
• The inner chamber is made of monoblock stainless steel with rounded corners to reduce the risk of contamination in the device.
• The outer body is stainless steel made of electrostatic painted galvanized sheet.
• The device offers the user the opportunity to program between 0 and 99.99 hours.
• The device provides wide usage opportunity with delayed start and indefinite operating mode.
• Emsaş A.Ş. All medical devices manufactured by us are guaranteed for 2 years.

• Speed: 11,800rpm with 24- place rotor
• RCF: 14,000g with 24-place rotor
• Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
• Brake: Automatic
• Noise: 62dB running with 24-place rotor
• Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
• Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
• Weight: 5.1Kg net (without rotor)
• Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
• Construction: Aluminium casing with a steel lid
• Finish: Body cream white baked enamel, with matt black baked enamel lid

Click Here To Download Catalogue

• This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
• This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
• Easy to wash.

• Sturdy high-impact plastic rack will hold from 6 to 31 test tubes up to 25mm in a diameter
• Easy to assemble
• Chemical resistant