HONKON-M206 Water Oxygen Facial Cleanser
$0.00
Shipped From Abroad
Operation scope:
- Clean the epidermis of the skin
- Hydrate and oxygenate the skin.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
Principle of Operation
How it works:
HONKON’s water oxygen cleanser fully combines oxygen and nutrient solution, and sprays water vapor mixed particles from the nozzle at a speed of 230m/s (similar to the spray form) to act on the skin. The tiny particles with a diameter of about 50-80um (smaller than the diameter of the pores) pass from the epidermis to below the basal layer of the epidermis to clean the skin. If nutrients are added to the base liquid, it can improve the skin’s internal environment and can replace manual skin care.
Operating range:
1. Clean the epidermis of the skin 2. Hydrate and oxygenate the skin.
Product advantages:
The high-pressure gas is mixed with the nutrient solution through a stainless steel needle and sprayed out water vapor particles with a diameter of about 50μm at a speed of up to 230m/s.
Oxygen pressure gauge, real-time pressure display, the operator can easily judge whether it meets the operation needs.
The gas output flow control system can adjust the gas output volume and gas output pressure according to the patient’s operation site and operation lesion.
When used in conjunction with nutrient solution products, the operating effect and factor operating effect complement each other to achieve 1+1≥2.
Technical Parameters:
Water mist particle speed: ≤230m/s
Built-in air source output pressure: ≤0.8MPa
Number of instruments: 4
Water mist particle diameter: ≤80um
Gas source type: built-in gas source 5L gas tank
Operation pen: O-II
Number of operating pens: 2
Insurance specification: Max6A
Power supply: AC220V±10%, 50HZ, AC110V±10%, 60HZ
Gear: 1-2 gears adjustable, one gear step
Accessories Details:
The O-II operating glove is beautiful, easy to use, and can be repaired after damage, which significantly reduces the user’s cost of use; the cleaning effect is obvious; customers are advised to stock up on an O-II type operating glove packaged in a shell box in case of emergency.
Quick Comparison
| Settings | HONKON-M206 Water Oxygen Facial Cleanser remove | Timesco Jumper Fingertip Pulse Oximeter remove | Intersurgical Solus i-gel LMA (Size; 2, 3, 4 & 5) remove | Omron M2 Upper Arm Blood Pressure Monitor Medium Cuff remove | Bistos BT-770-12.1" Touchscreen Patient Monitor remove | MIR Spirolab Spirometer remove |
|---|---|---|---|---|---|---|
| Name | HONKON-M206 Water Oxygen Facial Cleanser remove | Timesco Jumper Fingertip Pulse Oximeter remove | Intersurgical Solus i-gel LMA (Size; 2, 3, 4 & 5) remove | Omron M2 Upper Arm Blood Pressure Monitor Medium Cuff remove | Bistos BT-770-12.1" Touchscreen Patient Monitor remove | MIR Spirolab Spirometer remove |
| Image |  |  |  |  |  |  |
| SKU | SF1033560130100-9 | SF1033560084-2 | SF1033560084-20 | SF1033560084-37 | SF1033560059-1 | SF1033560084-13 |
| Rating | ||||||
| Price |
| $17.00 | $12.75 | $45.00 | $902.00 | $2,101.00 |
| Stock | ||||||
| Availability | ||||||
| Add to cart | ||||||
| Description | Shipped From Abroad
Operation scope:
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| In Stock Integrated with SPO2 probe and processing display module. Small in volume、light in weight and convenient in carrying. Operation of the product is simple ,low power consumption. SPO2 , PR and Ridisplay,. Pulse rate value display, bar graph display. Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage. Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe. Delivery & Availability: Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In stock
| In stock
Omron M2 Upper Arm Blood Pressure Monitor Medium CufF: Omron M2 Upper Arm Blood Pressure Monitor Medium Cuff is a useful tool for clinical management of patients with hypertension. The ease with which using this machine can be learned is a major advantage. zWith this device, you can regularly check your blood pressure level and even get the same consistent accuracy as in your doctor’s office. This digital BP monitor has an arm cuff and a built-in LCD screen to display of the blood pressure readings. A wonderful feature that comes with this monitor is that readings given by the monitor can be stored in the monitor’s memory and can be printed out later.
| Shipped from Abroad The Bistos BT-770 patient monitor is equipped with a 12.1" touchscreen display, which allows for an easy operation and readability with a powerful rechargeable battery guaranteeing a continuous operation of 5 hours to monitor ECG, SpO2, NIBP, temperature and respiration Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In Stock
Spirometry test:
|
| Content | Principle of Operation
How it works: HONKON's water oxygen cleanser fully combines oxygen and nutrient solution, and sprays water vapor mixed particles from the nozzle at a speed of 230m/s (similar to the spray form) to act on the skin. The tiny particles with a diameter of about 50-80um (smaller than the diameter of the pores) pass from the epidermis to below the basal layer of the epidermis to clean the skin. If nutrients are added to the base liquid, it can improve the skin's internal environment and can replace manual skin care.Operating range: 1. Clean the epidermis of the skin 2. Hydrate and oxygenate the skin.Product advantages: The high-pressure gas is mixed with the nutrient solution through a stainless steel needle and sprayed out water vapor particles with a diameter of about 50μm at a speed of up to 230m/s. Oxygen pressure gauge, real-time pressure display, the operator can easily judge whether it meets the operation needs. The gas output flow control system can adjust the gas output volume and gas output pressure according to the patient's operation site and operation lesion. When used in conjunction with nutrient solution products, the operating effect and factor operating effect complement each other to achieve 1+1≥2.Technical Parameters: Water mist particle speed: ≤230m/s Built-in air source output pressure: ≤0.8MPa Number of instruments: 4 Water mist particle diameter: ≤80um Gas source type: built-in gas source 5L gas tank Operation pen: O-II Number of operating pens: 2 Insurance specification: Max6A Power supply: AC220V±10%, 50HZ, AC110V±10%, 60HZ Gear: 1-2 gears adjustable, one gear stepAccessories Details:
The O-II operating glove is beautiful, easy to use, and can be repaired after damage, which significantly reduces the user's cost of use; the cleaning effect is obvious; customers are advised to stock up on an O-II type operating glove packaged in a shell box in case of emergency.
| Integrated with SPO2 probe and processing display module • Small in volume, light in weight, convenient in carrying • Simple operation, lower power consumption • OLED screen display • SPO2, PR, bar graph of pulse, plethysmogram, blood perfusion index, battery indication display • 4 directions display, 6 display models, large fonts display • Brightness control, Demo mode, Setup menu • Movement interference • Alarm function and adjustable alarm parameters • Can be connected to mobile phones through Bluetooth; can support Android and iOS client • Auto power-off when no signal after 10s • Powered by 2*AAA alkaline batteries Specification: • Size: 62 x 37 x 32mm • Peak wavelength range of the light emitted from the probe: red light 660nm±3; infrared light 905nm±5 • Maximum optical output power of the probe: 1.2mW for infrared light (905nm) • Bluetooth module: 4.0 (single-mode) • Working temperature: 5℃ to 40℃ (41°F to 104°F) • Relative humidity: 15% to 80%, non-condensing • Atmospheric pressure: 70kPa to 106kPa • Rated voltage: DC 3V Package included: • 1 x JUMPER JPD-500F Bluetooth Fingertip Pulse Oximeter • 2 x AAA Batteries • 1 x Carry Case • 1 x Lanyard • 1 x English User Manual |
| Omron M2 Upper Arm Blood Pressure Monitor Medium Cuff: Omron M2 Upper Arm Blood Pressure Monitor Medium Cuff is a useful tool for clinical management of patients with hypertension. The ease with which using this machine can be learned is a major advantage.With this device, you can regularly check your blood pressure level and even get the same consistent accuracy as in your doctor’s office. This digital BP monitor has an arm cuff and a built-in LCD screen to display of the blood pressure readings. A wonderful feature that comes with this monitor is that readings given by the monitor can be stored in the monitor’s memory and can be printed out later.
|
Bistos BT-770 is a 12.1" touchscreen patient monitor designed for easy operations.
SPECIFICATIONS
Click Here To Download Catalogue | Spirometry test:
Spirometry parameters:
FVC, FEV1, FEV1/FVC, FEV1/VC, PEF, FEF25, FEF50, FEF75, FEF25–75, FEF75–85, Lung Age, Extrapolated Volume, FET, Time to PEF, FEV0.5, FEV0.5/FVC, FEV0.75, FEV0.75/FVC, FEV2, FEV2/FVC, FEV3, FEV3/FVC, FEV6, FEV1/ FEV6, FEV1/PEF, FEV1/ FEV0.5, FIVC, FIV1, FIV1/FIVC, PIF, FIF25, FIF50, FIF75, FEF50/FIF50, VC, IVC, IC, ERV, IRV, Rf, VE, VT, tI, tE, VT/tI, tE/tTOT, MVV (measured), MVV (calculated).
Click Here To Download Catalogue |
| Weight | N/A | N/A | N/A | N/A | N/A | N/A |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
Reviews
There are no reviews yet.