AGA- Phlebology table

$0.00

Shipped From Abroad

Phlebology tables with a 3-piece tabletop, also for use as an examination chair

The 3-piece phlebology tables AGA-PHLEBO-LIFT and AGA-PHLEBO-MAT from AGA Sanitätsartikel can be used not only in phlebology and dermatology. They can be converted into a gynaecology, rectoscopy or proctology examination chair in just a few seconds. The 3-piece vein treatment tables are also equipped with an electric motor for tilt adjustment as standard. On the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, there is a second electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130137-16

Description

  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
  • The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
  • Cutouts are incorporated into the seat and foot sections.

 

Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/3EE VEKO-1062/3E
Frame Lacquered
Length
Back/seat/foot sections
1,900 mm
1,020 / 365 / 465 mm
Width 620 mm
(680 mm with standard rails)
Height adjustment 730 – 930 mm (electric motor)
Height 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 3 sections
Upholstery thickness 64 mm
Back section adjustment +30º (gas pressure spring)
Load capacity 150 kg
Leg section adjustment Folding down using locking pins
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the leg section for easier getting on and off.
  • A floor frame with levelling feet.
  • A neck roll with two straps, fixed to the back cushion.
  • A cutout in the seat cushion for gynaecological examinations.
  • A safety limit switch to avoid damage caused by the folded leg section.

 

Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs.  Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “AGA- Phlebology table”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAGA- Phlebology table removeGlass Measuring Cylinder 250ml removeConical Glass Flask 500ml removePetri Dish Per Pack removeOPTIKA B-382PL-ALC Binocular Brightfeld Microscope removeOptika B-150P-BRPL Binocular Polarizing Microscope remove
NameAGA- Phlebology table removeGlass Measuring Cylinder 250ml removeConical Glass Flask 500ml removePetri Dish Per Pack removeOPTIKA B-382PL-ALC Binocular Brightfeld Microscope removeOptika B-150P-BRPL Binocular Polarizing Microscope remove
ImageOPTIKA B-382PL-ALC Binocular Brightfeld MicroscopeOptika B-150P-BRPL Binocular Polarizing Microscope
SKUSF1033560130137-16SF1033560084-162SF1033560084-159SF1033560084-172SF1033560098-13SF1033560098-3
Rating
Price

$0.00

$6.20

$6.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad
Phlebology tables with a 3-piece tabletop, also for use as an examination chair
The 3-piece phlebology tables AGA-PHLEBO-LIFT and AGA-PHLEBO-MAT from AGA Sanitätsartikel can be used not only in phlebology and dermatology. They can be converted into a gynaecology, rectoscopy or proctology examination chair in just a few seconds. The 3-piece vein treatment tables are also equipped with an electric motor for tilt adjustment as standard. On the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, there is a second electric motor for height adjustment in addition to the electric motor for tilt adjustment.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
Brand Name Sciencent
Capacity 250.0 milliliters
Material Glass
Number of Items 1
Part Number SC-35
Size XL
Specification Met
UNSPSC Code 41000000
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Measuring flask
  • Conical shape with long neck, ideal for swirling
  • Lined with metric increments up to 500ml
  • Reinforced rim
  • Ideal for measuring and mixing spirits and cocktail ingredients
  • Great for molecular mixology and molecular gastronomy
  • Dishwasher safe
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock Premium petri dishes made to withstand wet or dry repeated sterilisation. The heavy borosilicate glass and can handle direct flames.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad The OPTIKA B-380 is an educational and laboratory microscope for routine applications. Dye-cast frame, with high stability and ergonomy, for transmitted light observation. Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad Cordless binocular polarized light microscope ideal for students and primary schools, with three PLAN achromatic lenses (400x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, rotating stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination.
Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
  • If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
  • The stability and robustness is achieved by the gusset plates in the frame corners.
  • The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
  • The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
  • The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
  • The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
  • The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
  • The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
  • The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
  • Cutouts are incorporated into the seat and foot sections.
 
Technical data
AGA-PHLEBO-LIFT AGA-PHLEBO-MAT
Article number VEKO-1060/3EE VEKO-1062/3E
Frame Lacquered
Length Back/seat/foot sections 1,900 mm 1,020 / 365 / 465 mm
Width 620 mm (680 mm with standard rails)
Height adjustment 730 - 930 mm (electric motor) -
Height - 930 mm
Tilt adjustment -20º / +74º (electric motor)
Upholstery segments 3 sections
Upholstery thickness 64 mm
Back section adjustment +30º (gas pressure spring)
Load capacity 150 kg
Leg section adjustment Folding down using locking pins
The standard configuration includes:
  • A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
  • A pair of black ring armrests, including fastening clamps for standard surgical rails.
  • A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
  • The foot switch(es).
  • A safety support rod that can be pulled out from the floor frame.
  • A cutout at the foot of the leg section for easier getting on and off.
  • A floor frame with levelling feet.
  • A neck roll with two straps, fixed to the back cushion.
  • A cutout in the seat cushion for gynaecological examinations.
  • A safety limit switch to avoid damage caused by the folded leg section.
 
Accessories & additional options
Article No. Description
A-2047 Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60 Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs.  Retrofitting is not possible.
LR/Z-50 Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043 Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220 Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.
  • 250ml Glass Graduated Lab Cylinder, made of Thick Borosilicate Glass for Durability
  • Durable and Chemical resistant with 3.3 borosilicate glass for premium quality, strength and transparency, which can handle any high pressures and temperatures from the most harsh chemicals to extreme heating agents.
  • Internal diameter of 37mm Approx
  • Comes with Spout for easy pouring, and prevent chemical spills.
  • Laboratory Grade Cylinder, but feel free to be creative with it!
Brand Name Sciencent
Capacity 250.0 milliliters
Material Glass
Number of Items 1
Part Number SC-35
Size XL
Specification Met
UNSPSC Code 41000000
  • Measuring flask
  • Conical shape with long neck, ideal for swirling
  • Lined with metric increments up to 500ml
  • Reinforced rim
  • Ideal for measuring and mixing spirits and cocktail ingredients
  • Great for molecular mixology and molecular gastronomy
  • Dishwasher safe
Premium petri dishes made to withstand wet or dry repeated sterilisation. The heavy borosilicate glass and can handle direct flames. Features:
  • Heavy duty borosilicate glass petri dish
  • Autoclavable, can withstand direct flames and harsh chemicals
  • Individually wrapped top and bottom in wax paper
Observation mode: Brightfield. Head: Binocular, 30° inclined, 360° rotating (when ALC cable is unplugged). Interpupillary distance: Adjustable between 48 and 75 mm. Dioptric adjustment: On the left eyepiece tube. Eyepieces: WF10x/20 mm, high eye-point and secured by screw. Nosepiece: Quintuple revolving nosepiece, rotation on ball bearings. Objectives: N-PLAN 4x/0.10 N-PLAN 10x/0.25 N-PLAN 40x/0.65 N-PLAN 100x/1.25 (Oil/Water) All with anti-fungus treatment. Specimen stage: Double layer rackless mechanical stage, 150×139 mm, 75×33 mm X-Y range. Focusing: Coaxial coarse (adjustable tension) and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Condenser: Abbe N.A. 1.25, with objective-coded iris diaphragm, focusable and centerable. Illumination (Fixed Koehler type): X-LED3 with white 3.6 W LED (6,300K) and brightness control. ALC system. Multi-plug 100-240Vac/6Vdc external power supply.  
Click Here To Download Catalogue
Cordless binocular polarized light microscope ideal for students and primary schools, with three PLAN achromatic lenses (400x), FN 18 high eyepoint eyepieces, finite optical system, coaxial focusing, rotating stage, Abbe condenser and powerful, uniform, white color temperature 1 W X-LED1 illumination. Slim and easy to carry, it is equipped with all the main controls to start learning how to use an advanced microscope and with long lasting LED illumination to provide over 20 years of use. Rotating swing-out polarizer and sliding-out fixed analyzer included. The exclusive Li-Ion battery ensures unparalleled duration and fast recharge. Features:
  • Observation mode: Brightfield, Polarized Light.
  • Head: Binocular, 30° inclined; 360° rotating.
  • Eyepiece: WF10x/18 mm, secured by screw.
  • Nosepiece: Quadruple ball bearings revolving nosepiece.
  • Objectives: – N-PLAN 4x/0.10, with anti-fungus treatment – N-PLAN 10x/0.25 , with anti-fungus treatment – N-PLAN 40x/0.65 , with anti-fungus treatment
  • Specimen stage: Rotatable round stage, 120 mm diameter.
  • Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen. Adjustable tension of coarse focusing knob.
  • Condenser: N.A. 1.25, pre-centered, fixed with iris diaphragm.
  • Illumination: X-LED1 with white 1 W LED and light intensity control.
  • Color temperature: 6,300 K. Li-Ion battery for long lasting operation. Multi-plug 100-240Vac/5Vdc external power supply.
  • Polarizing filters: Rotating Polarizer (swing-out) and fixed Analyzer (sliding-out).
  Technical Specifications:
Observation Method - Transmitted Light Brightfield Yes
  Simple polarized light Yes
Main Body Type Upright
  Construction material Aluminum die-cast
Head Type Binocular (Siedentopf)
  Inclination 30°
  360° rotating Yes
  Interpupillary distance (mm) 48-75
  Dioptric adjustement On left tube
  Fixing screw for eyepieces Yes
  Tube inner diameter (mm) 23
Eyepieces Field number (mm) 18
  Magnification 10x
  High eyepoint (for glass wearers) Yes
  Pointer As optional
  Micrometric scale As optional
  Diameter of micrometer glass (mm) 20
Nosepiece Positions Quadruple
  Bi-directional Yes
  Rotation on ball bearings Yes
  Objective thread RMS
Objectives Optical system 160
  Anti-fungus treatment Yes
  Parfocal distance (mm) 45
  Standard magnifications 40x-400x
  Type N-PLAN
  Objectives included 4x/0.10, W.D. 15.2 mm 10x/0.25, W.D. 5.5 mm 40x/0.65, W.D. 0.45 mm
Stage Type Round
  Rotation 360°
  Dimensions (mm) 120
  Material Anti-scratch painting
  Specimen clips Yes
  Slide number 1
Condenser - Single Position Type Fixed
  Numerical aperture (N.A.) 1.25
  Diaphragms Iris
  Centrable Pre-centered
Focusing System Type Coaxial coarse & fine
  Coarse total travel (mm) 16
  Fine total travel (per single rotation) (mm) 0.4
  Fine graduations 100
  Fine resolution (µm) 4
  Upper stop to prevent contact Yes
  Adjustable tension Yes
Transmitted Illumination Type X-LED
  X-LED type X-LED1
  Light source power (W) 1
  Brightness control Manual
  Lifetime (hours) > 65,000
  Temperature (K) 6,300
  Max. required power (W) 1.5
Power Supply for Transmitted Illumination Type External
  Microscope connector Jack, 2.1 mm
  Power plug type Multi-plug (EU, UK, US)
  Input voltage 100/240 Vac, 50/60 Hz
  Output voltage 5 Vdc 500 mA
  LED indicator Yes
  Rechargeable batteries Yes
  Battery type Li-ion (battery pack)
  Working time of batteries (hours) 15
  Charging time of batteries (hours) 6
Accessories Included Dust cover Yes
  Tension adjustment tool Yes
  User Manual Digital version (downloadable)
Additional Information Rotating polarizer (swing-out) and fixed analyzer (sliding-out) filters
Product Weight Height (mm) 350
  Width (mm) 170
  Depth (mm) 320
Product Weight (kg) 4
 
Click Here To Download Catalogue 
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare