View cart “Tripod Stand” has been added to your cart.

AGA- Phlebology table

~~$0.00~~

Shipped From Abroad

Phlebology tables with a 3-piece tabletop, also for use as an examination chair

The 3-piece phlebology tables AGA-PHLEBO-LIFT and AGA-PHLEBO-MAT from AGA Sanitätsartikel can be used not only in phlebology and dermatology. They can be converted into a gynaecology, rectoscopy or proctology examination chair in just a few seconds. The 3-piece vein treatment tables are also equipped with an electric motor for tilt adjustment as standard. On the AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, there is a second electric motor for height adjustment in addition to the electric motor for tilt adjustment.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130137-16

Description
Reviews (0)

Description

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 – 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
Cutouts are incorporated into the seat and foot sections.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/3EE	VEKO-1062/3E
Frame	Lacquered
Length Back/seat/foot sections	1,900 mm 1,020 / 365 / 465 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 – 930 mm (electric motor)	–
Height	–	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	3 sections
Upholstery thickness	64 mm
Back section adjustment	+30º (gas pressure spring)
Load capacity	150 kg
Leg section adjustment	Folding down using locking pins

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the leg section for easier getting on and off.
A floor frame with levelling feet.
A neck roll with two straps, fixed to the back cushion.
A cutout in the seat cushion for gynaecological examinations.
A safety limit switch to avoid damage caused by the folded leg section.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient’s legs. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V	Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “AGA- Phlebology table”

Quick Comparison

Settings AGA- Phlebology table remove Optika B-69 Binocular Microscope remove Glass Measuring Cylinder 1000ml remove Volumetric Flask 500ml remove Glass Measuring Cylinder 500ml remove Lab/Ward Coat remove

Name AGA- Phlebology table remove Optika B-69 Binocular Microscope remove Glass Measuring Cylinder 1000ml remove Volumetric Flask 500ml remove Glass Measuring Cylinder 500ml remove Lab/Ward Coat remove

Image

SKU SF1033560130137-16 SF1033560098-1 SF1033560084-164 SF1033560084-188 SF1033560084-163 SF1033560084-222

Rating

Price

~~$0.00~~

$7.00

$4.10

$7.00

$11.00

Stock

Availability

Add to cart

Description

Shipped From Abroad

Phlebology tables with a 3-piece tabletop, also for use as an examination chair

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Ship from abroad Cordless, modern binocular microscope ideal for students and mainly primary schools with achromatic lenses (1000x), FN 18 eyepieces, finite optical system, coaxial focusing, StagErase™ eraseable mechanical stage, Abbe condenser and 1 W LED illumination with rechargeable batteries.

Delivery & Availability: Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Class B (+/-10ml)
Graduations: 10ml, 100ml to 1000ml
O.D. x Height: 66 x 458mm (2.5 x 18in) (approx.), Base: 125mm (5 in)
Type 1 Class A Borosilicate 3.3 Glass
Capacity in accordance with ASTM E-1272

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Made of borosilicate glass
With rim, class A
ISO 1042
Diameter 100mm Height 260mm
Accuracy +/-0,25ml

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Borosilicate glass measuring cylinder set with brush, including 500ml Borosilicate Glass Measuring Cylinder
Heavy duty round glass (with good Ablesbaren measurments (clear scale and precise calibration – Orange graduation with main point ring increments
Food-safe and alcohol resistant, sturdy borosilicate glass – Easy to clean, dishwasher-safe
Width rim and a tapered pour spout for easy filling and pouring
High-quality labor from sturdy heat acid and alcohol resistant borosilicate glass.Wrapped von powerful bladder to protect Package

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
Easy to wash.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

If necessary, for example when a patient collapses, the phlebology tables can be adjusted from the almost vertical position (74°) to the horizontal position (0°) to the shock position (20° negative).
The stability and robustness is achieved by the gusset plates in the frame corners.
The base, which is equipped with levelling feet, guarantees a high level of stability, even in the almost vertical upholstery position, in conjunction with the pull-out support rod, even under stress.
The shockproof and scratch-resistant covers on the column and base, like all other components, are easy to clean.
The three upholstery segments (back, seat and foot sections) each have a thickness of 64 mm.
The AGA-PHLEBO-MAT, Article No.: VEKO-1062/3E, has a fixed working height (930 mm) in the horizontal upholstered position. The height adjustment cannot be retrofitted.
The AGA-PHLEBO-LIFT, Article No.: VEKO-1060/3EE, is also equipped with an electromotive height adjustment (730 - 930 mm, measured in the horizontal upholstered position).
The height and tilt adjustments are done with maintenance-free and splash-proof and extremely quiet electric drives, controlled via foot switches (alternatively, at no extra charge, via a hand switch). The adjustment systems are equipped with key locks. Connection values per motor: 230V, 50/60 Hz., 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
The headrest can be adjusted continuously up to +30°, using a gas pressure spring.
Cutouts are incorporated into the seat and foot sections.

Technical data

	AGA-PHLEBO-LIFT	AGA-PHLEBO-MAT
Article number	VEKO-1060/3EE	VEKO-1062/3E
Frame	Lacquered
Length Back/seat/foot sections	1,900 mm 1,020 / 365 / 465 mm
Width	620 mm (680 mm with standard rails)
Height adjustment	730 - 930 mm (electric motor)	-
Height	-	930 mm
Tilt adjustment	-20º / +74º (electric motor)
Upholstery segments	3 sections
Upholstery thickness	64 mm
Back section adjustment	+30º (gas pressure spring)
Load capacity	150 kg
Leg section adjustment	Folding down using locking pins

The standard configuration includes:

A pair of side-mounted standard surgical rails, dimensions 25 x 10 mm, made of CrNi steel, length 900 mm.
A pair of black ring armrests, including fastening clamps for standard surgical rails.
A removable footboard, dimensions 490 x 320 mm, thickness 15 mm, black, with anti-slip surface.
The foot switch(es).
A safety support rod that can be pulled out from the floor frame.
A cutout at the foot of the leg section for easier getting on and off.
A floor frame with levelling feet.
A neck roll with two straps, fixed to the back cushion.
A cutout in the seat cushion for gynaecological examinations.
A safety limit switch to avoid damage caused by the folded leg section.

Accessories & additional options

Article No.	Description
A-2047	Arm support, swivel-mounted, black PU-foam arm shell, dimensions approx. 400 x 120 mm (L x W), with 2 Velcro fasteners to secure the arm to the shell, chrome-plated holder with attachment for standard rail.
FR-60	Heel rest, recommended for use when bandaging. The patient can place their heels on the roll, which is attached to the black footboard with Velcro fasteners giving the medical personnel both hands free to bandage the patient's legs. Retrofitting is not possible.
LR/Z-50	Mobile base with central locking castor system, welded into the base frame (dimensions approx. 1,000 x 450 mm), consisting of 2 swivel and 2 fixed castors, Ø 50 mm, foot pedal with black cap located towards the head end. Retrofitting is not possible.
P-2065/A	Paper roll holder, with mounting hardware, chrome-plated, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm), two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm), for mounting on the upholstery frame.
PEF-1043	Upholstered insert, to close the cutout at the foot end of the upholstered tabletop, see upholstery colours.
PG-220	Patient belt, dimensions 2,200 x 250 mm (L x W), sewn from synthetic leather, with Velcro closure (hook and loops straps), see upholstery colours.
VA-40/V	Stainless steel bowl, with holder and safety limit switch, dimensions approx. 300 x 200 x 65 mm, located directly under the seat section. Retrofitting is not possible.

Cordless, modern binocular microscope ideal for students and mainly primary schools with achromatic lenses (1000x), FN 18 eyepieces, finite optical system, coaxial focusing, StagErase™ eraseable mechanical stage, Abbe condenser and 1 W LED illumination with rechargeable batteries. Slim and easy to carry, it is equipped with arm/wrist rest support to reduce the fatigue during use and long lasting LED illumination to provide over 20 years of use. Features:

Observation mode: Brightfield.
Head: Binocular, 30° inclined; 360° rotating.
Dioptric adjustment: Left eyepiece.
Eyepiece: WF10x/18 mm, secured by screw
Nosepiece: Quadruple ball bearings revolving nosepiece, reversed.
Objectives: – Achromatic 4x/0.10, with anti-fungus treatment – Achromatic 10x/0.25, with anti-fungus treatment – Achromatic 40x/0.65, with anti-fungus treatment – Achromatic 100x/1.25 (oil), with anti-fungus treatment
Specimen stage: StagErase™ eraseable mechanical stage, 125×125 mm, 62×24 mm X-Y movement range. Vernier scale on the two axes, accuracy: 0.1 mm.
Focusing: Coaxial coarse and fine focusing mechanism with limit stop to prevent the contact between objective and specimen.
Condenser: Abbe N.A. 1.25, pre-centered, focusable, with iris diaphragm.
Illumination: 1 W LED, with brightness control, rechargeable batteries.
Color temperature: 6,300 K. Multi-plug 100-240Vac/5Vdc external power supply.

Technical Specifications:

Observation Method - Transmitted Light	Brightfield	Yes
	Simple polarized light	As optional
Main Body	Type	Upright
	Construction material	Aluminum die-cast
	Trasportation handle	Yes
Head	Type	Binocular (Siedentopf)
	Inclination	30°
	360° rotating	Yes
	Interpupillary distance (mm)	55-75
	Dioptric adjustement	On left tube
	Fixing screw for eyepieces	Yes
	Tube inner diameter (mm)	23
Eyepieces	Field number (mm)	18
	Magnification	10x
	Pointer	As optional
	Micrometric scale	As optional
Nosepiece	Positions	Quadruple
	Reversed	Yes
	Bi-directional	Yes
	Rotation on ball bearings	Yes
	Objective thread	RMS
Objectives	Optical system	160
	Anti-fungus treatment	Yes
	Parfocal distance (mm)	35
	Standard magnifications	40x-1000x
	Type	Achromatic
		4x/0.10, W.D. 10.6 mm
		10x/0.25, W.D. 7.0 mm
		40x/0.65, W.D. 0.5 mm
		100x/1.25 (Oil), W.D. 0.13 mm
Stage	Type	Double layer
	Dimensions (mm)	125x125
	Moving mechanism	Rack and pinion
	Moving range (mm)	62x24
	Material	Anti-scratch painting
	Specimen holder	Yes
	Slide number	1
	X-Y Vernier scale	Yes
	Vernier scale accuracy (mm)	0.1
Condenser - Single Position	Type	Abbe
	Numerical aperture (N.A.)	1.25
	Diaphragms	Iris
	Focusable	By rotation
Focusing System	Type	Coaxial coarse & fine
	Coarse total travel (mm)	23
	Fine total travel (per single rotation) (mm)	1.2
	Fine graduations	100
	Fine resolution (µm)	12
	Upper stop to prevent contact	Yes
Transmitted Illumination	Type	LED
	Light source power (W)	1
	Brightness control	Manual
	Lifetime (hours)	> 65,000
	Temperature (K)	6,300
	Max. required power (W)	1.5
Power Supply for Transmitted Illumination	Type	External
	Microscope connector	Jack, 2.1 mm
	Power plug type	Multi-plug (EU, UK, US)
	Input voltage	100/240 Vac, 50/60 Hz
	Output voltage	5 Vdc 500 mA
	Rechargeable batteries	Yes
	Battery type	Ni-MH (3x, AAA size)
	Working time of batteries (hours)	4
	Charging time of batteries (hours)	8
Accessories Included	Dust cover	Yes
	Immersion oil (10ml)	Yes
	User Manual	Digital version (downloadable)
Product Dimensions	Height (mm)	330
	Width (mm)	135
	Depth (mm)	235
Product Weight	(kg)	3.0

Class B (+/-10ml)
Graduations: 10ml, 100ml to 1000ml
O.D. x Height: 66 x 458mm (2.5 x 18in) (approx.), Base: 125mm (5 in)
Type 1 Class A Borosilicate 3.3 Glass
Capacity in accordance with ASTM E-1272

Capacity	1000.0 milliliters
Ean	0817556011295
Graduation Interval	10.00 milliliters
Item Weight	1.93 pounds
Material	Borosilicate Glass
Number of Items	1
Part Number	213I15
Size	Single

Made of borosilicate glass
With rim, class A
ISO 1042
Diameter 100mm Height 260mm
Accuracy +/-0,25ml

Borosilicate glass measuring cylinder set with brush, including 500ml Borosilicate Glass Measuring Cylinder
Heavy duty round glass (with good Ablesbaren measurments (clear scale and precise calibration – Orange graduation with main point ring increments
Food-safe and alcohol resistant, sturdy borosilicate glass – Easy to clean, dishwasher-safe
Width rim and a tapered pour spout for easy filling and pouring
High-quality labor from sturdy heat acid and alcohol resistant borosilicate glass.Wrapped von powerful bladder to protect Package

Brand Name	Ronyes
Ean	0606860013596
Model Number	Borsilikatglas - DE
Number of Items	1
Part Number	Borsilikatglas - DE
Specification Met
UPC	606860013596

This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
Easy to wash.

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information