AGA-UNI-MED-Multi-Function Examination Table

• The height and tilt adjustments are controlled by an electric motor. Precision double square guides are installed in the height adjustment mechanism of the AGA-UNI-MED.
• The maintenance-free and extremely quiet electric drives used in the AGA-UNI-MED are controlled by foot switches (alternatively - at no extra charge - by hand switches). The adjustment systems are equipped with key locks. Motor connection values (each): 230V, 50/60 Hz, 3.7A, 850W, IPX4, v=11mm/s, 10,000N.
• The two lifting columns (low-voltage electric drives) of the AGA-DUO-LIFTO-MED, which are characterized by their smooth running, are made of anodized light metal. They are controlled by a transformer and operated by a handset with six buttons. The hand control is multitasking, allowing simultaneous height and tilt adjustment. Motor connection values (each): 230V, 50/60Hz, 6.0A, 240W, IPX6, v=16mm/s, 2 x 1,000N.
• Adjustment of Trendelenburg and anti-Trendelenburg positions.
• The stability and robustness is achieved by the gusset plates in the frame corners.
• A high level of stability is ensured by the wide projection of the base frame, which is fitted with levelling feet.
• The upholstered frame is chrome-plated. The base frame of the AGA-UNI-MED is also chrome-plated and that of the AGA-DUO-LIFTO-MED is lacquered blank steel.
• A pair of standard rails, made of stainless steel, dimensions 25 x 10 mm, length 1,720 mm, are attached to the side of the upholstered frame to hold accessory components.
• The thickness of each of the three upholstery segments (head, middle and foot sections) is 64 mm.
• There are cutouts in the upholstery and upholstery frame at the foot end, where the stainless steel tray included in the scope of delivery, dimensions 300 x 200 x 65 mm (L x W x H) is located.
• Adjustment of the head, middle and foot sections is continuous. They are locked in place using clamping handles with clamping rod mechanisms.

• A pair of standard rails attached to the side of the upholstered frame.
• A pair of leg holders with plastic shells.
• A pair of fastening clamps.
• Cutouts in the foot section and upholstery frame.
• A stainless steel tray with holder.
• A paper roll holder attached to the head end of the upholstered frame.
• A floor frame with levelling feet.
• The foot or hand switches.

• BILIPOD LED Double Surface Phototherapy Unit Sturdy Baby Trolley consists of –  Collapsible Acrylic Side Panels  Transparent Baby Tray with Bubble Mattress  Height Adjustment and Angle Adjustment for Overhead LED Module  Four Swivelling castor wheels with brakes Certified Also available - Bilipod Double Surface Phototherapy Unit with Detachable trolley
• Uniform Light Distribution with 11 High Intensity LED Lamps uniform body coverage • Observation Lamp Two Observation White LEDs provide enough light to observe the color of baby’s skin • High Irradiance Levels Irradiance > 30 µW/cm²/nm enables faster bilirubin breakdown • Pin Drop Silent Operation zero noise cooling fan • Optimum Wavelength Range: 420 to 490 nm • Very Low Power Consumption of only 30W • Effective Surface Area : 40cm x 50cm
• Life of Lamps - 30000 hours • Lamp Tilt up to 90° • Height Adjustability up to 50cm • Light Weight Lamp Unit weighs less than 3 Kg • Portable can be placed above Infant incubator or below the Infant Warmer Bassinet to give under surface Phototherapy • Sleek & Compact Lamp Unit Size : 45 x 30 x 5 cm takes minimum space • Timer: LCD Based Timer measuring Total Lamp Usage and Patient Timer
• BiliProbe Irradiance Meter Handheld Irradiance (Flux) meter for measurement of the output of conventional Phototherapy Units.  Bandpass filter - 425nm to 475nm  Range: 0 to 200 uW/cm²/nm  Minimal Graduation: 1 uW/cm²/nm  Accuracy: ± 10%  Measuring Time: Approx 4-5 sec  Press to ON Switch  Battery: 9V Alkaline Phototherapy Eye PATCH has been designed to assure complete comfort, and eye protection for infants during Phototherapy Treatment  Adjustable Band for proper comfort and secure fit  Easy to use design  Large eye protection pad increases light protection  Single Piece wrap around design can be independently adjusted to prevent unwanted movement.  Available in 3 sizes - Preterm, Term and Neonatal Phototherapy Eye Patch

Click Here To Download Catalogue 

This multi function obstetric table is designed and manufactured to meet the need of the medical enterprise. It is used for childbirth, gynecology surgical operation, examining and many other functions, including cesarean operation. The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning and sterilizing.

Technical Specifications:

• Table top dimension: length 1900mm, width 610mm
• Min.& Max. table height: 660mm~910mm
• Trendelenburg & reverse trendelenburg: reverse trend ≥ 10°, trend ≥15°
• Back section turning: -10°~75°
• Assist platform dimension: length 550mm, width 550mm
• Arm rest swing out: ≥ 90°
• Filth basin dimension:468×338×125mm(can be equipped with soft pipe)
• Power: AC 220V 50HZ

• Waterproof cushion - 1 set
• Waist grab handle - 1 pair
• Leg holder - 1 pair
• Filth basin - 1 piece
• Arm rest - 1 pair
• Foot switch - 1 piece
• Clamp - 1 pair

• Sit position function
• Hi-lo function
• Abdomen auto-extension decompression
• Backrest angle indicator
• Whole bed angle indicator
• Bumper wheels
• Handset

• Size: 2140*1000*440~770mm
• Packing size: 223*107*50cm(honeycomb box)/1pc
• Max. Loading: 250KG(550lb) in movement
• Function: Backrest tilting From 0°to 75° ±5°
• Footrest tilting From 0°to 40° ±5°
• Reverse:14°±1°
• Trendelenburg: 14°±1°

• 4pcs 5”Taiwan castors with central brake system,
• 1 pair brake pedal,
• 4pcs PP side rails,
• 2pcs ABS head and foot board,
• 4pcs urine hooks,
• 1 set MOTECK motor system,
• 4pcs bumper wheels,
• 4pcs angle indicators,
• 1pc electric cable holder,
• 4pcs Dust cover Option: I.V pole, mattress, over bed table, bedside locker