Anaesthesia Machine Model 40

Features

• Built-in 8” color anesthesia ventilator

• Traditional CO₂ absorber (autoclavable, Patent)

• Dual high-end precise vaporizers (Volume > 280ml)

• Dual gas sources system (O₂/N₂O)

• Continuous FiO₂ monitoring & bain circuit interface

• Electronic tidal volume (Innovation)

• Battery backup for all systems over 60 mins

• Optional: Backup Yoke system (O₂, N₂O)

• Optional: Anesthesia gas scavenging system

• Optional: Anesthesia gas modular patient monitor

• ABS Structure

• Large pressure gauges for easy reading

• CO₂ absorber with easy change-over system

• Optional: Yoke system for backup 1xO₂, 1xN₂O A-Type cylinder

Safety Features

• Gas interlocking system with hypoxy guard

• Oxygen exhaust alarm

• Blow-off valve in top circuit

Technical Specification

Anaesthesia Main Unit

• High-resolution 8” color TFT LCD screen

• Dual-end pressure flow sensor for monitoring:

  • Tidal Volume

  • Respiratory frequency

  • Airway pressure

  • Pressure-time wave

  • Flow-time wave (two-way)

  • High and Low Pressure limitations

  • Apnea

  • Oxygen concentration (Auto/Manual)

• Respiration loop function: Close, Semi-close, Semi-open

• Application: Adult, Pediatric

• Low gas alarming: Alerts if gas supply lasts under 7 seconds

• High pressure limitation: Safety shutoff for overpressure

• Low pressure protection: Auto stop for N₂O if O₂ pressure < 0.1 MPa

• Power failure alarming & extendable function

• O₂ flush: 25 ~ 75L/min

• Gas pressure:

  • O₂: 0.3 ~ 0.5 MPa

  • N₂O: 0.3 ~ 0.5 MPa

• Power supply: 220V±10%, 50Hz±1%; Backup USB Battery

• Optional: Yoke system for backup O₂, N₂O cylinders

Flow Meter

• O₂, N₂O - Four tubes (0.05 ~ 1 L/min, 1 ~ 10 L/min)

• O₂/N₂O inter-lock system to keep O₂ concentration ≥ 25%

Anaesthesia Ventilator

• Adult, Pediatric bellows 1 set each

• Pneumatic driven electric control

• Monitor parameters:

  • Tidal Volume

  • Respiratory frequency

  • I:E ratio

  • M.V.

  • FiO₂

  • Apnea

  • Peak airway pressure

  • Airway pressure waves

• Working Modes: Manual, Auto (IPPV, SIGH, SIMV, SIPPV, Demo, optional PCV, PSV)

• Tidal Volume: 50 ~ 1500 mL

• Respiratory Frequency: 4 ~ 99 bpm

• I:E Ratio: 1.0:5 ~ 1:8 (Adjustable)

• Trigger Pressure: -2 ~ 0 kPa

• High pressure limitation: 2 ~ 6 kPa

• Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

• Compact CO₂ absorber (Autoclavable)

Vaporizer

• High-end precise vaporizers (Halothane, Isoflurane, Sevoflurane)

• Adjustable ranges:

  • Halothane/Isoflurane: 0.5 ~ 5% VOL

  • Sevoflurane: 0.5 ~ 8% VOL

• Automatic compensation function (flow, pressure, temperature)

• Self-lock function & inter-lock function

• Volume: >280 mL

• Weight - 105 kg
• Dimensions - 92 cm Wide x 68 cm Deep x 139 cm High (93 cm to the table surface)
• Packaging Dimensions - 105 cm Wide x 75 cm Deep x 160 cm High
• Operating voltage supply - 110 to 240 V~, 47 to 63 Hz (12 to 6 A)
• Power input - 120 W typically (max. 1.2 kW with auxiliary outlets used)
• Battery autonomy - 90 min typically
• Auxiliary power outlets - 4, with automatic protection
• O₂, N₂O and Air supply - 2.7 to 6.9 bar (39.1 to 100 psi)
• Screen - TFT 18.5" (47 cm) projected capacitive touchscreen
• Protection class - Class I, gas analyser type BF defibrillation proof
• Classification - Class II b
• Storage - One front drawer with self-brake system and two back cabinets with door
• Lighting - LED bar below the screen controlled from the touchscreen
• Auxiliary integrated systems - Auxiliary 02 flow meter (0-15 L/min), Auxiliary 02 suppy valve (NF standard) and Suction device
• Communication ports - 1 x RS-232, 2 x USB, 1 x LAN Ethernet

• Fresh gas flow - 0 and 0.1 to 18 L/min 02/N20/Air
• Accuracy - 0.1 to 0.5 L/min = ±0.05 L/min; 0.5 to 18 L/min = ±10 %
• 02 concentration - 21 to 100% vol. with Air, 25 to 100% with N20 (minimum 200 ml/min 02)
• 02 Safety fresh gas (backup) - 0-0.2-0.4-0.7-1-1.5- 2- 3- 4- 6- 8-10-12-15 L/min 02
• 02 flush (+02) - 40 L/min standard (adjustable 25 - 75 L/min upon requirement)

• Autoclavable - 134 °C
• Weight of breathing system - 9.8 kg
• C02 absorber volume - 1.5 L
• Leakage - < 150 mL/min (at 30 hPa)
• Pressure limiting valve APL - 0 to 70 hPa
• Pressure relief valve - 125 hPa
• Vacuum safety valve - 0.3 hPa
• resistance at 60L/min - 5.80 hPa
• resistance at 60L/min - 2.90 hPa
• resistance at 30L/min - 3.55 hPa
• resistance at 30L/min - 0.89 hPa
• Internal Compliance at 30 hPa - 15 mL

• Volume Controlled Ventilation (VCV)
• VC Synchronized Intermittent Mandatory Ventilation (VC-SIMV)
• VC-SIMV with Pressure Support (VC-SIMV-PS) *

• Pressure Controlled Ventilation (PCV)
• PC Synchronized Intermittent Mandatory (PC-SIMV)
• PC-SIMV with Pressure Support (PC-SIMV-PS) *

• Adaptive Pressure with Volume Guaranteed (APVG) *
• APVG Synchronized Intermittent Mandatory (APVG-SIMV) *
• APVG -SIMV with Pressure Support (APVG-SIMV-PS) *

• (other trade names: PS, ASB, SPS, IPS)

• Manual ventilation through the CABS system (Auto/Manual software controlled)
• Spontaneous ventilation either through the bellows (auto mode) or through the bag
• (manual mode) Manual ventilation through the external fresh gas outlet for non-rebreathing systems (Bain, Mapleson, ...)

• Tidal volume - 5 to 1500 mL
• Inspiratory pressure - 0 to 68 hPa
• Ventilation frequency ­- 3 to 120/min
• Inspiratory time - 0.05 to 16.6s
• l:E ratio - 5:1 to 1:8
• Inspiratory pause - 0 to 60%
• Inspiratory flow - max. 150 L/min
• PEEP - 0 to 30 hPa
• Flow trigger - 0.2 to 15 L/min
• Pressure support - 5 to 50 hPa
• Ramp time - 0.1 to 2 s
• Maximum pressure - 0 to 68 hPa

• 5" (47 cm) projected capacitive touchscreen, supported on a 360° rotating and 2 axis tilting arm.
• Measurements displayed: Peak pressure; Plateau pressure; Mean pressure; Expiratory minute ventilation; Expiratory tidal volume; Inspiratory tidal volume; Expiratory volumeter; Breathing rate; Compliance and Resistance (in VC modes); Patient info (age, weight, MAC, Class ASA); Connected sensors; Battery status; Power supply status; Gases supply pressures for 02, N20 and Air; Inspiratory and expiratory concentration of 02, N20, C02 and Anaesthetic gas*
• Parametres charted as curves (up to 3 simultaneously): Airway pressure; Expiratory flow; Inspiratory flow; Volume; Fresh gases (Rotstyle); Concentration of 02, N20, C02 and Anaesthetic gas*; Trends: Minute volume, MAC and gases (02, N20, C02 and Anaesthetic gas).
• Display for the performance of the hospital Anaesthetic Gas Scavenging System (AGSS).
• Configurable interface: bright/dark, multi-language.
• Loops (up to 2 simultaneously): Volume-Pressure, Flow-Volume, Pressure-Flow, C02-Volume.
• Fresh gas virtual rotameters for 02, N20, Air. * C02, N20 and Anaesthetic gas monitoring with the accessory multigas analyzer main-stream or side-stream; 02 real-time monitoring via paramagnetic

Click Here To Download Catalogue

• Contains Output interface for Anesthesia information management system.
• Complete with backup battery for working more than 30 minutes.

Click Here To Download Catalogue

• Mechanic gas mixing system
• Electronic lung ventilator with 12” TFT colour display
• Valves group: open, semi-closed, closed, heated, with soda lime absorber (1,5 Kg)
• SIARETEX rapid connection device, Selectatec compatible for 2 vaporizers
• Gas supply group
• Ventilation modalities: APCV-PCV; APCV-TV; PSV; APNEA BACK-UP; VC-VAC; VC-VAC BABY; SIMV+PS (volumetric); SPONT; MANUAL.
• Measured parameters: PAW; PEEP; Vte; ExpMV; Rate; I:E; FiO2, Pmax; Pmean; Pause; Vti; FLOWi; FLOWe; Tinsp; Tesp; Tpause; Cs; Ri
• Displayed ventilation curves: Paw, Flow, Volume, Loop (Volume/Paw ; Volume/Flow)
• Adjustable parameters: – O2 built-in Mixer device from 21% to 99% – I:E Adjustable Ratio: 1:1-1:2-1:3-1:4-2:1-3:1 – Inspiratory Flow – PEEP – Breathing Rate – Minute Volume; – Tidal Volume – Inspiratory Pressure Limit – Inspiratory Pause – Inspiratory Time – Trigger
• Breathing system: The breathing system of Morpheus guarantees to the user an absolute flexibility and easy handling thanks to the noble construction materials employed. The valves group can be drawn-up and it’s totally autoclavable at 121°C and all its parts are manually dismountable, with no need of special tools.The breathing system is made of; Calibrated APL valve, Fresh gas collecting bag, O2 cell for reading of FiO2, Removable 1 kg soda lime canister, Manually inspectionable bellows jar, Safety valve for ambience air suction in case of fresh gas failure, Flow transducer inside the group located on the expiratory line.

Click Here To Download Catalogue

• This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
• This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
• Easy to wash.