Anaesthesia Machine Model 50

Features

• Contains Output interface for Anesthesia information management system.
• Complete with backup battery for working more than 120 minutes.

• Built-in 10.4” color anesthesia ventilator

• Traditional CO₂ absorber (autoclavable, Patent)

• Dual high-end precise vaporizers (Volume > 280ml)

• Three gas sources system (O₂/N₂O/Air)

• Continuous FiO₂ monitoring & bain circuit interface

• Electronic tidal volume (Innovation)

• Battery backup for all systems over 60 mins

• Optional: Backup Yoke system (O₂, N₂O)

• Optional: Anesthesia gas scavenging system

• Optional: Anesthesia gas modular patient monitor

• Structure made of ABS

• Large pressure gauges for easy reading

• CO₂ absorber with easy changeover system

• Optional: Yoke system for backup 1×O₂, 1×N₂O A-Type cylinder

Safety Features

• Gases interlocking system with hypoxy guard

• Oxygen exhaust alarm

• Blow-off valve in top circuit

Technical Specification

Anaesthesia main unit

• High resolution 10.4" color TFT LCD screen

• Dual-end pressure flow sensor, the unit can monitor Tidal Volume, Respiratory frequency, airway pressure, pressure-time wave, flow-time wave (two-way), High Pressure limitation, Low Pressure limitation, Apnea, Oxygen concentration under both two operating modes (Auto, Manual)

• Respiration loop function

• Close, semi-close, semi-open

• Application: Adult, Pediatric

• Low gas alarming: It gives an alarm if it lasts more than 7 seconds.

• High pressure Limitation: Whenever airway pressure exceeds the pre-set High pressure, the ventilator offers automatic protection to ensure patient safety.

• Low pressure protection: Once O₂ pressure is less than 0.1MPa, N₂O gas supply stops automatically.

• Power failure alarming, power extendable function

• O₂ flush: 25 ~ 75L/min

• Gas Pressure:

  • O₂: 0.3 ~ 0.5MPa

  • N₂O: 0.3 ~ 0.5MPa

  • AIR: 0.3 ~ 0.5MPa

• Power: 220V±10%, 50Hz±1%; Backup USP Battery.

• Optional: Yoke system for backup O₂, N₂O cylinders

Flow meter

• O₂, N₂O, AIR – six tubes (0.05 ~ 1 L/min, 1 ~ 10L/min)

• O₂/N₂O inter-lock system, to keep O₂ concentration no less than 25%

Anaesthesia Ventilator

• Adult, Pediatric bellows 1 set each

• Pneumatic-driven electric control

• Monitor Parameters: Tidal volume, Respiratory frequency, I:E rate, M.V., FiO₂, Apnea, Peak airway pressure, airway pressure waves (P-T, F-T) etc.

• Working mode: Manual, Auto (IPPV, SIMV, A/C, SIGH, PCV, PSV, Demo.)

• Tidal volume: 50 ~ 1500 mL

• Respiratory frequency: 4 ~ 99 bpm

• I:E Ratio: 1.0:5 ~ 1:8 (adjustable)

• Synchronizer trigger Pressure: -2 ~ 0 kPa

• High pressure limitation: 2 ~ 6 kPa

• Low pressure limitation: 0 ~ 2 kPa

Respiratory Circuit

• Consolidated compact CO₂ absorber (autoclavable).

Vaporizer

• High-end precise vaporizer (Halothane, Isoflurane, Sevoflurane)

• Halothane/Isoflurane adjustable range: 0.5 ~ 5% VOL

• Sevoflurane adjustable range: 0.5 ~ 8% VOL

• Automatic compensation function – flow, pressure, temperature

• Self-lock function & inter-lock function

• Volume: >280 ml

• Provided with 22mm Corrugated tube of length 1.6m
• APL Valve
• 2 L Antistatic Rebreathing bag
• 6mm Green PVC tube of length 1.6m

• This white coat laboratory coat is a knee-length overcoat/smock is perfect for professionals in the medical field or by those involved in laboratory work.
• This garment is Easy to wash and made from a cotton polyester blend, allowing it to be washed at high temperature and make it easy to see if it is clean.
• Easy to wash.

• Soft cushion for patient comfort and air tight fit
• Clear flexible housing and cushion for good patient visibility
• Four sizes available, from small adultl to extra large adult
• Each mask supplied with color-coded hook ring.