Auto BIPAP VM-7 Machine
$0.00
Shipped From Abroad
The VentMed BiPAP VM7 is an automatic bi-level device that delivers effective therapy for a wide range of users noncompliant with traditional CPAP devices. It delivers two different values of air pressure, one for inhaling, another for exhaling, to hold a user’s upper airway open and help him/her breathe more effectively. The VentMed VM7 is a premium BiPAP for patients who have been diagnosed with severe sleep apnea.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
Key Features of Auto BIPAP VM-7:
Auto ON / OFF
Designed to make the device start automatically in a while after you wear mask, and stop the device work automatically in 10 seconds after you take mask away. The Auto ON/OFF function can be turned off on the menu.
Smart Ramp Settings
It lets the sleep apnea therapy start from a low and pleasant pressure level when the user is still awake. Then the air pressure is gradually ramped up to the correct level and the user can easily fall asleep without even noticing the increment.
Sleep Tracking
It comes with a TF card that will allow you to keep detailed data about your sleep disorder. The new TF card will allow you to store your sleep apnea information, which will enable you to get therapy support from your doctor, and compile compliance reports.
Alarm Setting
Designed to alarm when there is leakage. Can set as ON or OFF.
Whisper-Quiet
It is less than 26 decibels (dB), making it quieter than a whisper and comparable to leaves rustling.
Expiratory Pressure Relief
The VM7 BIAP automatically sets EPR (Expiratory Pressure Relief) function so you may find it easier to breathe out. This can help you get used to therapy.
You can set the expiratory pressure relief Level to off (0) or between 1 and 3, where 1 is the lowest expiratory pressure relief and 3 is the highest setting.
Heated Humidifier
The humidifier moistens the air and is designed to make therapy more comfortable. You can set the Humidity Level to off (0) or between 1 and 5, where 1 is the lowest humidity setting and 5 is the highest humidity setting.
The push-pull water tank design is very easy to disassemble and install, which is convenient for adding water and cleaning.
ST Mode & Backup Rate (BUR)
A BPM value (Breaths per Minute) can be set as a backup rate in ST Mode. If the user’s spontaneous respiratory rate falls below that value, the device will add pressure to prompt him/her to breathe.
With the machine intervening in the breathing, it can help the user inhale and exhale more easily during challenging conditions, lowering respiratory muscle workload. It can also get the user more oxygen and reduce CO2 in the user’s bloodstream.
Specifications
|
Product Name
|
BIPAP VM-7
|
|
Material
|
ABS+plastic
|
|
Color
|
Black
|
|
Work mode
|
CPAP,Auto,Auto S, S,T,ST
|
|
Sound
|
<28db
|
|
Data storage
|
TF card
|
|
Screen
|
2.8 inch color
|
|
Pressure Range
|
4-25cmH2O
|
|
Power supply
|
Input100-240V.50-60Hz,1-2A; Output+24V,2.5V
|
|
Over-temperature protection
|
Stop working automatically,
buzzle ring 4 times
|
|
Ramp itemÂ
|
0-60min adjustable 1 min/step
|
|
Auto ON/OFF
|
Yes
|
|
EPR
|
Yes,0-3 level
|
|
Auto-Altitude
|
Yes
|
|
Leak compensation
|
Yes
|
|
Awake detection
|
Yes
|
|
Breath Event detection
|
Yes
|
|
Auto pressure titration
|
Yes
|
|
Water Capacity
|
200ML max
|
|
Humidifier
|
Heated Humidifier,0-5 level
|
|
Mask /power Off Alarm
|
Yes
|
|
Dimensions
|
29L*15W*10H(machine);
38.5L*36.5W*16H(carton)
|
|
Weight(With humidifier)
|
1.8KG(Net weight);4KG(Gross weight)
|
|
work for
|
OSA /CSA /MSA/ Hypopnea/ COPD
|
Quick Comparison
| Auto BIPAP VM-7 Machine remove | Sonoscape S8 Exp Portable Ultrasound remove | ASPEL Ambulatory BP Machine remove | MIR Spirolab Spirometer remove | FlowMir Disposable Turbine with Cardboard Mouthpiece remove | ASPEL AsCARD Green ECG Machine remove | |||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Auto BIPAP VM-7 Machine remove | Sonoscape S8 Exp Portable Ultrasound remove | ASPEL Ambulatory BP Machine remove | MIR Spirolab Spirometer remove | FlowMir Disposable Turbine with Cardboard Mouthpiece remove | ASPEL AsCARD Green ECG Machine remove | ||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | SF1033560130180-11 | SF1033560012-15 | SF1033560075-13 | SF1033560084-13 | SF1033560084-22 | SF1033560075-9 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price |
| $9,350.00 | $920.00 | $2,101.00 | $145.00 |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Shipped From Abroad
The VentMed BiPAP VM7 is an automatic bi-level device that delivers effective therapy for a wide range of users noncompliant with traditional CPAP devices. It delivers two different values of air pressure, one for inhaling, another for exhaling, to hold a user’s upper airway open and help him/her breathe more effectively. The VentMed VM7 is a premium BiPAP for patients who have been diagnosed with severe sleep apnea.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| Shipped from Abroad With ultra-modern innovative design and the clinically-proven technologies, S8 Exp is portable ultrasound scanner well equipped as a low-physical-effort and enhanced-image-quality ultrasound scanner, which not only provides optimized solutions for versatile applications, but does help to improve the user-experience for both routine and non-traditional challenges. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | Shipped from Abroad ASPEL Ambulatory BP Machine - is a recorder of long-term records of non-invasive measurement of blood pressure intended for use in clinics, hospitals, outpatient centers and specialist surgeries. The recorder enables the assessment of blood pressure by the oscillometric method in adult patients, pregnant women, including preeclampsia and pediatric patients (from 3 years of age). Blood pressure is assessed by using an inflatable cuff, an accurate pressure transducer, and a deflation valve. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In Stock
Spirometry test:
| In stock Spirometry testing requires maximum accuracy and hygiene. Each Flowmir disposable turbine, which includes a cardboard mouthpiece, has been individually factory calibrated with a computerized system and it is packaged individually. FlowMIR® is an inexpensive alternative to a costly reusable flowmeter and replaces the need for an antibacterial filter Typically 2 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | Shipped from Abroad AsCARD Green v.06.101 is a 1-, 3-, 6- and 12-channel ECG unit which enables to make electrocardiogram in full 12 leads. Intended for ECG examinations of adult and paediatric patients aimed at identification of cardiological abnormalities, myocardial ischaemia or infarction. The device is intended for use in healthcare facilities by duly trained personnel. ECG examination may be recorded in manual or automatic mode with the ability to perform the analysis and interpretation. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Key Features of Auto BIPAP VM-7:
Auto ON / OFF
Designed to make the device start automatically in a while after you wear mask, and stop the device work automatically in 10 seconds after you take mask away. The Auto ON/OFF function can be turned off on the menu.
Smart Ramp Settings
It lets the sleep apnea therapy start from a low and pleasant pressure level when the user is still awake. Then the air pressure is gradually ramped up to the correct level and the user can easily fall asleep without even noticing the increment.
Sleep Tracking
It comes with a TF card that will allow you to keep detailed data about your sleep disorder. The new TF card will allow you to store your sleep apnea information, which will enable you to get therapy support from your doctor, and compile compliance reports.
Alarm Setting
Designed to alarm when there is leakage. Can set as ON or OFF.
Whisper-Quiet
It is less than 26 decibels (dB), making it quieter than a whisper and comparable to leaves rustling.
Expiratory Pressure Relief
The VM7 BIAP automatically sets EPR (Expiratory Pressure Relief) function so you may find it easier to breathe out. This can help you get used to therapy.
You can set the expiratory pressure relief Level to off (0) or between 1 and 3, where 1 is the lowest expiratory pressure relief and 3 is the highest setting.
ST Mode & Backup Rate (BUR)
A BPM value (Breaths per Minute) can be set as a backup rate in ST Mode. If the user’s spontaneous respiratory rate falls below that value, the device will add pressure to prompt him/her to breathe.
With the machine intervening in the breathing, it can help the user inhale and exhale more easily during challenging conditions, lowering respiratory muscle workload. It can also get the user more oxygen and reduce CO2 in the user’s bloodstream.
Specifications
| Sonoscape S8 Exp Portable Ultrasound scannerDETAILS Agile and Versatile With ultra-modern innovative design and the clinically-proven technologies, S8 Exp Portable Ultrasound scanner is well equipped as a low-physical-effort and enhanced-image-quality ultrasound scanner, which not only provides optimized solutions for versatile applications but does help to improve the user experience for both routine and non-traditional challenges. Working with S8 Exp, it will trigger your unlimited reverie and endow you with endless charm. Carrying forward the classical design of SonoScape's portable ultrasound products, S8 Exp successfully combines the best ergonomics, attractive design and ease of use. This charismatic identity is also enhanced by a sophisticated color palette—with sedate grey as its interior paint color and pearl white as exterior cover, S8 Exp reveals a style of aristocrat and strong character among SonoScape's ultrasound systems. Workflow The S8 Exp is a portable ultrasound scanner that adapts to your workflow, whether you are in the consulting room, at the bedside, or at a remote location. With easy-to-use new platform designed for sonographers' needs and full connection interfaces for easy connectivity and data sharing, S8 Exp leads to improved user comfort and clinical outcome as well as patient throughput and working efficiency. Powerful Platform Embedded with SonoScape's core imaging technologies such as μ-scan, PHI and Spatial Compound, S8 Exp boasts exceptional 2D image, sensitive spectral, Color and Power Doppler, displaying well-defined anatomy and pathology and facilitating a highly optimized diagnostic user environment for conclusive diagnoses. Besides, S8 Exp offers a comprehensive selection of electronic probes to maximally extend its capabilities to meet a wide range of applications including the abdomen, pediatric, OB/GYN, cardiovascular, musculoskeletal, etc. The advanced probe technologies also effectively enhance the image quality and confidence in reaching clinical diagnoses even in difficult patients.Click Here To Download Catalogue | ASPEL Ambulatory BP Machine - is a recorder of long-term records of non-invasive measurement of blood pressure intended for use in clinics, hospitals, outpatient centers and specialist surgeries. The recorder enables the assessment of blood pressure by the oscillometric method in adult patients, pregnant women, including preeclampsia and pediatric patients (from 3 years of age). Blood pressure is assessed by using an inflatable cuff, an accurate pressure transducer, and a deflation valve.
Features:
Save-2-Safe: Double security system
Thanks to the use of two independent measuring systems with an additional valve, it meets the highest standards and takes care of patient safety even better.
Start-Easy: Quick start in two moves
The quick launch function allows you to use the device instantly, easily allows you to start recording in holter mode.
Memo-Care: Cuff pressure memory
Recorder remembers the pressure in the cuff. Thanks to the use of Intelligent Solutions, it adapts individually to the patient.
Power-Usb: USB connection
The device can work without batteries: by connecting to a computer via a USB cable.
Technical Specification:
Click Here To Download Catalogue | Spirometry test:
Spirometry parameters:
FVC, FEV1, FEV1/FVC, FEV1/VC, PEF, FEF25, FEF50, FEF75, FEF25–75, FEF75–85, Lung Age, Extrapolated Volume, FET, Time to PEF, FEV0.5, FEV0.5/FVC, FEV0.75, FEV0.75/FVC, FEV2, FEV2/FVC, FEV3, FEV3/FVC, FEV6, FEV1/ FEV6, FEV1/PEF, FEV1/ FEV0.5, FIVC, FIV1, FIV1/FIVC, PIF, FIF25, FIF50, FIF75, FEF50/FIF50, VC, IVC, IC, ERV, IRV, Rf, VE, VT, tI, tE, VT/tI, tE/tTOT, MVV (measured), MVV (calculated).
Click Here To Download Catalogue |
| AsCARD Green v.06.101 is a 1-, 3-, 6- and 12-channel ECG unit which enables to make electrocardiogram in full 12 leads. Intended for ECG examinations of adult and paediatric patients aimed at identification of cardiological abnormalities, myocardial ischaemia or infarction. The device is intended for use in healthcare facilities by duly trained personnel. ECG examination may be recorded in manual or automatic mode with the ability to perform the analysis and interpretation.
Electrocardiograph is based on advanced microprocessor technology .It is equipped with a thermal printer with high-resolution head and 4,3" LCD display. A touch panel and high-tech membrane keyboard makes this device intuitive in usage and its menu navigation exceptionally easy. This light-weight, small-footprint and battery powered cause that device can be easily transported to any location. With plastic casing and foil covered keyboard, the device is neat and easy to clean.
Technical Specifications:
Click Here To Catalogue Download | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
Reviews
There are no reviews yet.