Cleveland Open Cup Flash Point Tester PE-TVO

Purpose: The tester PE-TVO is intended for usage as laboratory equipment to perform open cup flash point determination of oil products according to method A ASTM D92 and GOST 4333-87.

Technical specifications: - Maximum heating temperature, °C - up to 370 - Power supply voltage from AC mains with frequency of 50Hz, V - 220±22 - Power consumption, no higher than, W - 1000 - Instrument weight, kg – 5 - Service life, years at least – 5

Operation conditions: - Air temperature, °C - 15?35 - Relative humidity, % - 30?90 - Overall dimensions (body), mm: - Length, mm - 330 - Width, mm - 250 - Height, mm - 165 - Range of flash point determination, °C - 25-370 - Ignition device, type  - gas - Control of electric heating power – electronic - Automatic passage of burner above surface of sample at set speed - Availability of gas network or cylinder (methane, propane/butane) is required

Scope of delivery: 1. The open cup flash point tester PE-TVO complete with cup - 1 pc. 2. Thermometer TH-2 according to GOST 400 – 1 pc. 3. Template for flame adjustment – 1 pc. 4. Operation manual- 1 pc. 5. Packaging crate – 1 pc.

• Speed: 11,800rpm with 24- place rotor
• RCF: 14,000g with 24-place rotor
• Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
• Brake: Automatic
• Noise: 62dB running with 24-place rotor
• Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
• Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
• Weight: 5.1Kg net (without rotor)
• Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
• Construction: Aluminium casing with a steel lid
• Finish: Body cream white baked enamel, with matt black baked enamel lid

Click Here To Download Catalogue

• Renal Function - BUN, CREA eGFR
• Liver Function - ALB, TP, ALP, ALT, AST, TBIL, DBIL, GGT, LDH A/G#, GLOB#, IBIL
• Lipid Metabolism - TG, TC, HDL LDL#, VLDL
• Pancreatitis Markers - AMY, LIPA
• Carbohydrate Metabolism and Others - GLU , CPK, UA, LAC
• Inflammatory Markers - CRP
• Electrolyte - Na, K, Cl, Ca, PHOS, Mg, tCO2

• Colormetric System : LEDs 340nm~940nm wavelength

• Test Profiles : Panels
• Measurement Time - Panel: up to 15 tests/ 15 min
• Sample Type & Volume : 200 μl whole blood (PCV<60%), plasma, serum 

• User Interface : 5 inch color LCD touch screen
• Internal Memory : Store up to 50,000 analysis results
• Printer : Built in thermal printer or external USB printer (PCL 3GUI)
• USB Socket : USB type A (Host) for external USB Printer, USB flash drive (FAT) or external barcode scanner
• Data transmission to PC : RS232 serial port or RJ45 (LAN)
• Dimensions : 233 (W) X 285 (D) X 300 (H) mm
• Weight : 5.5 kg

• Temperature / Humidity : 10 to 32˚C / 5 to 90 %

Click Here To Download Catalogue

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Total Volume: 60mL.
• Specimen Container, Leak-proof, Ideal for Pathology/Histology/Cytology reagent pre-filling sample preparation.
• Made of premium PP material, it is durable for usage.
• Some measurements can be used to not only use urine samples, it can also be used for other liquids.

• Pad Size: Unfolded: 30 x 60 mm (other size can be request ).
• Folded: 30x30 mm, 30 x 35mm,can be 2ply or 4ply ( other size, ply can be request ).
• Aluminum Package: 60 x 50 mm , 50 x 50mm approximate ( other size can be request ).
• Packing: 100/200 pcs per inner box, 50/ 100 boxes per carton(packing can be request).

• For cleaning prior to injection or to disinfect the hurted skin for family and medical treatment organization use.
• For preparation and immediate disinfection of skin, wound area orr Instrument and utensil.

• Not for eyes;
• keep out of reach of children;
• For external use only;
• please stop using if you feel allergic or amyctic