/

CON-TREX LP-Biomechanical Therapy System

$0.00

Shipped From Abroad

The CON-TREX LP leg press is an isokinetic test and training device for the entire movement chain of the leg extensors and flexors. It allows dosed, measurable forces from a few to 6000 N at speeds of up to 1 m/s. Separate footplates enable training unilaterally on the left or right, bilaterally on both legs or even alternately. The variably adjustable footplate holders can be used to specifically test and improve the stability of the ankle joints. The backrest, which is synchronized with the seat angle adjustment, can be lowered to the horizontal position at any time. The low seat height makes it easier to place patients with limited mobility.
The high precision of the dosed, measurable forces and the exceptional properties of the movement control provided by the drive system result in an extremely versatile area of ​​application on a minimal work area of ​​just 1.8 x 2.5 meters including the control module.
Due to the functional movement, the entire muscle chain of the lower extremities is strengthened, while at the same time coordination is improved and joint stability is increased. The optimally adapted load and exertion of the (atrophied) muscles over the entire range of motion leads to a very rapid increase in muscle strength and a significant improvement in coordination. All of this takes place without excessive strain on the joints, especially in physiologically unfavorable positions.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130148-19
Brands:: PHYSIOMED

Description

CON-TREX
  • high-precision isokinetic mode
  • Ballistics mode
  • active compensation of gravity
  • unique movement sequences
  • precise alignment of the dynamometer’s axis of rotation with respect to the joint axis
General Features
  • Sampling rate of 4000 Hz for highest precision
  • backlash-free drive train
  • EMG synchronization
  • three-stage security concept
  • individually customizable reports

 

Therapy information

CON-TREX is used in the early diagnostic and preventive therapy of musculoskeletal injuries in outpatient rehabilitation and in the clinic. It is also used in scientific research and performance optimization and enables careful specific problem analysis and thus highly efficient training of high-performance athletes.
CON-TREX devices are suitable for measurement and analysis due to their high precision and are therefore particularly suitable for scientific use. In training and therapy, they aim to improve muscular (in the strength and strength endurance areas) and sensorimotor skills. Thanks to its versatile measurement options and attractive exercise software, CON-TREX is ideally suited for the following applications

Orthopaedic rehabilitation and traumatology

CON-TREX enables early diagnosis and prevention of damage or injuries to the musculoskeletal system in outpatient rehabilitation and in clinical use.

Diagnosis and rehabilitation of musculoskeletal deficits
Muscular imbalances can disrupt the optimal movement sequence and have a damaging effect on joints, or be desired or required for a specific sport. CON-TREX helps to record, detect and analyze these. In addition, the CON-TREX devices can be used efficiently to eliminate muscular imbalances. A particular advantage is that the movement being tested can be trained at the same time.

Joint replacement
The CON-TREX devices are used primarily in the field of geriatric rehabilitation after artificial joint replacement. Patients can train actively and at a reasonable speed even if their muscle strength is very low and improve their muscle strength. This keeps the loss of strength as low as possible and the mobility of the joints is maintained or improved.

Neurological rehabilitation

In the case of neurologically caused performance impairments, such as after brain injuries or strokes, regaining coordination and control over muscle work is the focus of rehabilitative work. The German Society of Neurology calls for early functional mobilization of patients after strokes. CON-TREX is suitable for this because it offers the possibility of exercise and training in continuous passive movement mode: the patient’s affected limb is moved by CON-TREX and the patient can simultaneously try to control and move the limb themselves. CON-TREX simultaneously visualizes the patient’s current performance, i.e. the training is followed on the screen in real time and even the smallest progress can be immediately followed. This helps motivate the patient to increase the effectiveness of the rehabilitation through their active participation. This can only be achieved to a limited extent with “classic” training methods. Biofeedback training, especially under submaximal load, not only enables the efficient correction of muscular deficits, but is also an excellent method for improving coordination skills.

Optimized performance in competitive sports:

CON-TREX devices are used in competitive sports primarily for the objective assessment of the physical condition and optimization of the training process of competitive and high-performance athletes. With various strength tests that are carried out at regular intervals, coaches and athletes receive precise feedback on the effectiveness of their training. In the context of movement analyses to optimize the sport-specific movement sequence, precise problem analyses can also be carried out using combined EMG evaluations. In the rehabilitation of competitive athletes after injuries, CON-TREX devices enable highly efficient training and thus contribute to the sensible use of the injury time.

Science and Research

Thanks to the high measurement accuracy of the CON-TREX® devices, an objective evaluation of each patient with the highest possible validity is possible. CON-TREX® archives all relevant system parameters that could be useful for a scientific evaluation. In addition, the unique ballistic mode ensures a smooth movement and measurement process. The active gravity compensation enables an absolute and relative view of the values. For use in science and research, the CON-TREX® devices set an unprecedented high standard in terms of measurement accuracy and reproducibility of the parameters recorded.

Selected use cases
  • Hemiparesis (after stroke)
  • Leg strength measurement (bilateral) in a closed system
  • Leg strength measurements with rigid or flexible footplates
  • Continuous passive movement therapy (CPRT) of the legs
  • Leg strength measurement (unilateral) in a closed system
  • Fall prevention with closed system

Reviews

There are no reviews yet.

Be the first to review “CON-TREX LP-Biomechanical Therapy System”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsCON-TREX LP-Biomechanical Therapy System removeGround Control High Arch Insole removeGel Heel Cups Insole removeDiabetic Trim to Fit removeGround Control Medium Arch Insole removeGel Comfort Insole remove
NameCON-TREX LP-Biomechanical Therapy System removeGround Control High Arch Insole removeGel Heel Cups Insole removeDiabetic Trim to Fit removeGround Control Medium Arch Insole removeGel Comfort Insole remove
Image
SKUSF1033560130148-19SF1033560130135-18SF1033560130135-6SF1033560130135-19SF1033560130135-15SF1033560130135-1
Rating
Price

$0.00

$0.00

$0.00

$0.00

$0.00

$0.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad The CON-TREX LP leg press is an isokinetic test and training device for the entire movement chain of the leg extensors and flexors. It allows dosed, measurable forces from a few to 6000 N at speeds of up to 1 m/s. Separate footplates enable training unilaterally on the left or right, bilaterally on both legs or even alternately. The variably adjustable footplate holders can be used to specifically test and improve the stability of the ankle joints. The backrest, which is synchronized with the seat angle adjustment, can be lowered to the horizontal position at any time. The low seat height makes it easier to place patients with limited mobility. The high precision of the dosed, measurable forces and the exceptional properties of the movement control provided by the drive system result in an extremely versatile area of ​​application on a minimal work area of ​​just 1.8 x 2.5 meters including the control module. Due to the functional movement, the entire muscle chain of the lower extremities is strengthened, while at the same time coordination is improved and joint stability is increased. The optimally adapted load and exertion of the (atrophied) muscles over the entire range of motion leads to a very rapid increase in muscle strength and a significant improvement in coordination. All of this takes place without excessive strain on the joints, especially in physiologically unfavorable positions.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Ground Control insole aims to reduce pronation with a decoupled heel while using hybrid impact and energy return zones to work with the foot, not against it. Designed for active individuals.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad Slip-resistant design, deep heel cupping, and honeycomb impact protection for heel comfort.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Spenco Diabetic insole was developed for people experiencing or are prone to experience diabetic neurophaties or neuropathic ulcers. These insoles feature a frictionless Plastazote® top cover for sensitive feet paired with impact protecting Polysorb® cushioning.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad The Ground Control insole aims to reduce pronation with a decoupled heel while using hybrid impact and energy return zones to work with the foot, not against it. Designed for active individuals.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped From Abroad Advanced triple-density design provides comfort, cushioning and support. Ideal for everyday wear, especially when standing for long periods of time.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
CON-TREX
  • high-precision isokinetic mode
  • Ballistics mode
  • active compensation of gravity
  • unique movement sequences
  • precise alignment of the dynamometer's axis of rotation with respect to the joint axis
General Features
  • Sampling rate of 4000 Hz for highest precision
  • backlash-free drive train
  • EMG synchronization
  • three-stage security concept
  • individually customizable reports
 
Therapy information
CON-TREX is used in the early diagnostic and preventive therapy of musculoskeletal injuries in outpatient rehabilitation and in the clinic. It is also used in scientific research and performance optimization and enables careful specific problem analysis and thus highly efficient training of high-performance athletes. CON-TREX devices are suitable for measurement and analysis due to their high precision and are therefore particularly suitable for scientific use. In training and therapy, they aim to improve muscular (in the strength and strength endurance areas) and sensorimotor skills. Thanks to its versatile measurement options and attractive exercise software, CON-TREX is ideally suited for the following applications

Orthopaedic rehabilitation and traumatology

CON-TREX enables early diagnosis and prevention of damage or injuries to the musculoskeletal system in outpatient rehabilitation and in clinical use. Diagnosis and rehabilitation of musculoskeletal deficits Muscular imbalances can disrupt the optimal movement sequence and have a damaging effect on joints, or be desired or required for a specific sport. CON-TREX helps to record, detect and analyze these. In addition, the CON-TREX devices can be used efficiently to eliminate muscular imbalances. A particular advantage is that the movement being tested can be trained at the same time. Joint replacement The CON-TREX devices are used primarily in the field of geriatric rehabilitation after artificial joint replacement. Patients can train actively and at a reasonable speed even if their muscle strength is very low and improve their muscle strength. This keeps the loss of strength as low as possible and the mobility of the joints is maintained or improved.

Neurological rehabilitation

In the case of neurologically caused performance impairments, such as after brain injuries or strokes, regaining coordination and control over muscle work is the focus of rehabilitative work. The German Society of Neurology calls for early functional mobilization of patients after strokes. CON-TREX is suitable for this because it offers the possibility of exercise and training in continuous passive movement mode: the patient's affected limb is moved by CON-TREX and the patient can simultaneously try to control and move the limb themselves. CON-TREX simultaneously visualizes the patient's current performance, i.e. the training is followed on the screen in real time and even the smallest progress can be immediately followed. This helps motivate the patient to increase the effectiveness of the rehabilitation through their active participation. This can only be achieved to a limited extent with "classic" training methods. Biofeedback training, especially under submaximal load, not only enables the efficient correction of muscular deficits, but is also an excellent method for improving coordination skills.

Optimized performance in competitive sports:

CON-TREX devices are used in competitive sports primarily for the objective assessment of the physical condition and optimization of the training process of competitive and high-performance athletes. With various strength tests that are carried out at regular intervals, coaches and athletes receive precise feedback on the effectiveness of their training. In the context of movement analyses to optimize the sport-specific movement sequence, precise problem analyses can also be carried out using combined EMG evaluations. In the rehabilitation of competitive athletes after injuries, CON-TREX devices enable highly efficient training and thus contribute to the sensible use of the injury time.

Science and Research

Thanks to the high measurement accuracy of the CON-TREX® devices, an objective evaluation of each patient with the highest possible validity is possible. CON-TREX® archives all relevant system parameters that could be useful for a scientific evaluation. In addition, the unique ballistic mode ensures a smooth movement and measurement process. The active gravity compensation enables an absolute and relative view of the values. For use in science and research, the CON-TREX® devices set an unprecedented high standard in terms of measurement accuracy and reproducibility of the parameters recorded.
Selected use cases
  • Hemiparesis (after stroke)
  • Leg strength measurement (bilateral) in a closed system
  • Leg strength measurements with rigid or flexible footplates
  • Continuous passive movement therapy (CPRT) of the legs
  • Leg strength measurement (unilateral) in a closed system
  • Fall prevention with closed system
The Spenco Ground Control insole, available in three arch heights for optimized support at fit. Aim to reduce pronation with a decoupled heel while using hybrid impact and energy return zones to work with the foot, not against it. Separating the heel from the arch support and forefoot reduces pronation during foot strike. Designed for active individuals. Ready, set, go.
  • Perforated EVA body
  • Nylon arch support
  • Polymer forefoot pad for energy return
  • Polymer heel pad for energy absorption
  • Anti-slip textured nylon fabric with Silpure Antimicrobial to reduce odor
  • Love Your Feet, fun colors hidden inside your shoe
  • Decoupled heel
Specifications
Body Part Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee
Condition Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain
Activity Golf, Running, Hiking, Sports, Walking, Cross Training, Prolonged Standing
Shoe Type Run, Walk, Sport Specific, Work, Boots
Arch Type High
Spenco Gel Heel Cups offer deep cupping and gel cushioning to reduce heel pain. With contoured cushioning around the heel area, Gel Heel Cups can alleviate pain from heel spurs or bruises and general heel discomfort. Ideal for daily wear in any casual, work, or walking shoe, Gel Heel Cups combine Thermoplastic Rubber with an anatomical cushioning system for ultimate comfort. Thermoplastic Rubber provides superior cushioning and energy return while the anatomical cushioning system has dual density gels to absorb impact and shock where the heel needs it the most. To use Spenco Gel Heel Cups, simply place them against the inside heel area of your shoes. For the best fit, unlace your shoes entirely to allow for maximum room to correctly position your feet in the heel cups. Tighten laces after your foot is comfortably in place. Hand wash and air dry as needed. Gel Heel Cups come with a one-year unconditional guarantee.
  • Slip-resistant design, deep heel cupping, and honeycomb impact protection for heel comfort.
  • TPR Comfort Gel Thermoplastic Rubber combines cushioning and energy return for comfort.
  • Anatomical Cushioning System Dual density gels absorb impact and shock where the heel needs it most.
  • Heel Cup provides extra cushioning for the heel.
Specifications
Weight 0.15
Body Part Lower Back, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Knee
Condition Plantar Fasciitis, Flat Feet/Arch Support, Pain, Heel Spurs/Heel Pain
Activity Golf, Running, Hiking, Sports, Office, Casual, Walking, Cross Training, Prolonged Standing
Insole Length Full
Shoe Type Run, Walk, Sport Specific, Work, Boots, Dress, Heels
The Spenco Diabetic insole is designed for people who are experiencing or who are prone to experience diabetic neurophaties or neuropathic ulcers. The top cover features Plastazote® foam which has anti-friction properties that help eliminate pressure points and prevent painful blisters. The soft arch design provides all-day support. Low-density Polysorb® memory structured foam allows for additional cushioning and impact-suppression, resulting in all-day comfort. It was also built with a deep heel cup to help stabilize the rearfoot, so whether you are standing or walking, your feet will thank you. This insole is designed for use in a variety of shoes, including athletic, work, and most casual styles. The Spenco Trim-To-Fit Diabetic insole is intended to fit womens shoe sizes 5-11 and may be trimmed as needed for a true custom fit. To trim, simply remove the existing insole from your shoe, line it up with your new Spenco Plantar Fascia insole as a guide and trace with a ballpoint pen. Carefully cut with a sharp pair of scissors, then insert into your shoe with the top side up
  • Plastazote® foam top cover reduces friction and cushions sensitive feet
  • Polysorb® Memory Structured foam provides cushioning, impact suppression, and all-day comfort
  • Soft arch design provides all-day support
  • Developed specifically for those affected by Diabetes and foot discomfort
  • Trim-To-Fit sizing fits most shoe types and foot sizes
Specifications
Weight 0.35
Body Part Lower Back, Knee
Activity Walking
The Spenco Ground Control insole, available in three arch heights for optimized support at fit. Aim to reduce pronation with a decoupled heel while using hybrid impact and energy return zones to work with the foot, not against it. Separating the heel from the arch support and forefoot reduces pronation during foot strike. Designed for active individuals. Ready, set, go.
  • Perforated EVA body
  • Nylon arch support
  • Polymer forefoot pad for energy return
  • Polymer heel pad for energy absorption
  • Anti-slip textured nylon fabric with Silpure Antimicrobial to reduce odor
  • Love Your Feet, fun colors hidden inside your shoe
  • Decoupled heel
Body Part Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee
Condition Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain
Activity Golf, Running, Hiking, Sports, Walking, Cross Training, Prolonged Standing
Shoe Type Run, Walk, Sport Specific, Work, Boots
Arch Type Medium
The Spenco Gel Comfort Insole offers lasting comfort for those who are on their feet for long periods of time. An advanced triple-density design provides comfort, cushioning, and support for everyday wear. Ideal for workers, students, and travelers who are on their feet throughout the day, this insole works like an anti-fatigue mat to absorb shock and alleviate sore feet. Thermoplastic Rubber Comfort Gel, or TPR, combines cushioning and energy return to for daily comfort while metatarsal arch support relieves pressure from the ball-of-foot. A stability cradle supports the arch and heel for comfort, while also making the insole easier to place in the shoe. Softer gel in the heel absorbs impact with each heel strike by providing extra cushioning. Each insole is topped with a Silpure antimicrobial layer that eliminates odor causing bacteria and reduces friction and may be hand washed and air dried as needed. The Spenco Gel Comfort Insole comes with a one-year unconditional guarantee.
  • Triple Density Design comforts, cushions and supports advanced design for comfort.
  • TPR Comfort Gel thermoplastic rubber combines cushioning and energy return for comfort.
  • Metatarsal Arch Support relieves pressure from the ball-of-foot.
  • Top Cloth with Silpure Antimicrobial helps eliminate odor causing bacteria and reduces friction.
  • Stability Cradle supports the arch and heel for greater comfort. Makes it easier to place into the shoe.
  • Extra Heel Cushioning softer gel in the heel absorbs impact at heel strike.
Weight 0.68
Body Part Arch, Plantar Fascia, Calf, Achilles, Shin, Back, Heel, Ball of Foot, Knee
Condition Plantar Fasciitis, Over Pronation, Flat Feet/Arch Support, Morton's Neuroma/Ball-of-Foot, Pain, Hammer Toe, Heel Spurs/Heel Pain
Activity Golf, Running, Hiking, Sports, Casual, Walking, Cross Training, Prolonged Standing
Insole Length Full Length
Shoe Type Run, Walk, Sport Specific, Work, Boots
Arch Type Medium
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare