Deionized Water Purifier

Brands: Scitek

~~$0.00~~

Shipped From Abroad

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Sku:

SF1033560130127-45

Brands:: Scitek

Description
Reviews (0)

Description

Deionized Water Purifier Features:

The deionized water filter has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
The water deionizer filter has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
WP-DU series deionized water filter has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.

Deionized Water Purifier Specifications:

Model		WP-D20U	WP-D30U	WP-D40U	WP-D50U	WP-D60U
Water Output Speed		20L/h	30L/h	40L/h	50L/h	60L/h
Water Supply Requirement		Tap water: TDS<200ppm; Water pressure>0.1Mpa;
Water Supply Requirement		Water temperature: 5-45℃
Pure Water Quality	Conductivity	0.1us/cm (25℃)
	PH Value (25℃)	None
	Oxidizable (Calculated as O)	Technical requirements: ≦0.08mg/L;
	Oxidizable (Calculated as O)	Test results: ≦0.08mg/L
	Evaporation Residue (105±2℃)	Technical requirements: ≦1.0mg/L;
	Evaporation Residue (105±2℃)	Inspection results: 0.7mg/L
	Inspection Basis	GB/T6682-2008
Consumption		25W
Control System		Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance		Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System		Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit		American original RO reverse osmosis membrane/membrane group
Post Purification Unit		Purification column
Standard Accessories		Host + accessory package
Shipping Size (WxDxH)(mm)		533x435x550
N.W/G.W		23kg/25kg	28kg/30kg		33kg/35kg

Reviews

There are no reviews yet.

Be the first to review “Deionized Water Purifier”

Quick Comparison

Deionized Water Purifier remove Avalun LabPad Device remove Zenithlab (IB-9025A) Laboratory Incubator remove Sugentech Inclix (POCT) Immunoassay Analyzer remove AGD Erma EL-120 ELectrolyte Analyzer remove Hawksley 1400 Haematocrit Centrifuge remove

Name Deionized Water Purifier remove Avalun LabPad Device remove Zenithlab (IB-9025A) Laboratory Incubator remove Sugentech Inclix (POCT) Immunoassay Analyzer remove AGD Erma EL-120 ELectrolyte Analyzer remove Hawksley 1400 Haematocrit Centrifuge remove

Image

SKU SF1033560130127-45 SF1033560084-65 SF1033560084-109 SF1033560084-89 SF1033560084-125 SF1033560084-118

Rating

Price

~~$0.00~~

$350.00

~~$0.00~~

$1,320.00

$690.00

Stock

Availability

Add to cart

Description

Shipped From Abroad

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock The coagulometer, LabPad® INR, measures blood coagulation time thanks to a patented optical technology. This portable In-Vitro Diagnostics (IVD) device works with the Tsmart® INR single-use microcuvettes. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Microprocessor control.
Digital display setting and actual temperature.
Over temperature alarm, PID self-tuning.
Digital display running timer.
Stainless steel interior.
Electricity leakage protection.
With glass inner door, With hidden door locks.
Mechanical overheat protection, cut off the heating sources.
Automatic alarm after operation.
Suitable for constant temperature tests.
Suitable for bacteria cultivation, breeding, ferment.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock INCLIX™ is an immunochromatographic analyzer providing immediate point-of-care testing (POCT) at patient care settings or clinical laboratories. It facilitates automatic detection of various biomarkers for cardiovascular disease, infectious disease, cancer, diabetes, allergy, and etc. with high accuracy and sensitivity. INCLIX™ analyzer is a compact, easy-to-use and cost-effective multi-parameter POCT instrument and its unique user friendly software provides an efficient data management system. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped From Abroad

Electrolyte Analyzer ERMA EL-120 is ideal for medium to high volume Laboratories and Hospitals . It offers reliable, automated samples handling and work flow offences . It also allows measurement of specific ions, accurately and precisely . This supports fast diagnosis of critically ill patients and reduces the risks of patient discomfort associated with repeated sampling Precise & Accurate Results Economical to use Large Touchscreen Display with Graphical User Interface. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

The Hawksley Haematospin 1400 Centrifuges are built in the UK and are made from durable and high-quality components. These centrifuges are ideal for veterinary laboratories and practices specifically designed to produce reliable and accurate results on blood and urine. One of the main features of this centrifuge is that it takes both 2ml microtubes and 75mm microhaematocrits. The classic design of these centrifuges is used worldwide with guaranteed support for all servicing and parts. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Deionized Water Purifier Features:

The deionized water filter has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
The water deionizer filter has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
WP-DU series deionized water filter has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.

Deionized Water Purifier Specifications:

Model		WP-D20U	WP-D30U	WP-D40U	WP-D50U	WP-D60U
Water Output Speed		20L/h	30L/h	40L/h	50L/h	60L/h
Water Supply Requirement		Tap water: TDS<200ppm; Water pressure>0.1Mpa;
Water Supply Requirement		Water temperature: 5-45℃
Pure Water Quality	Conductivity	0.1us/cm (25℃)
	PH Value (25℃)	None
	Oxidizable (Calculated as O)	Technical requirements: ≦0.08mg/L;
	Oxidizable (Calculated as O)	Test results: ≦0.08mg/L
	Evaporation Residue (105±2℃)	Technical requirements: ≦1.0mg/L;
	Evaporation Residue (105±2℃)	Inspection results: 0.7mg/L
	Inspection Basis	GB/T6682-2008
Consumption		25W
Control System		Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance		Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System		Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit		American original RO reverse osmosis membrane/membrane group
Post Purification Unit		Purification column
Standard Accessories		Host + accessory package
Shipping Size (WxDxH)(mm)		533x435x550
N.W/G.W		23kg/25kg	28kg/30kg		33kg/35kg

The coagulometer, LabPad® INR, measures blood coagulation time thanks to a patented optical technology. This portable In-Vitro Diagnostics (IVD) device works with the Tsmart® INR single-use microcuvettes.

User-friendly: the LabPad® INR is designed to be easy to use especially thanks to its 3D-shaped microcuvette that only requires a small drop of blood from a fingertip. Thanks to the color screen, both measurement steps and browsing the list of results are easy to visualize.

Quick and reliable: the reliability of INR results is obtained by quality controls that are performed automatically before each measurement. In less than one minute, you can see if you are in your therapeutic range.

Connected: the result obtained after performing the test can be transferred to healthcare professionals in charge of your treatment monitoring. This result is complementary to the pie charts and trend reports directly displayed on the LabPad® INR to help you monitoring your treatment

Click Here To Download Catalogue

Features:

Microprocessor control.
Digital display setting and actual temperature.
Over temperature alarm, PID self-tuning.
Digital display running timer.
Stainless steel interior.
Electricity leakage protection.
With glass inner door, With hidden door locks.
Mechanical overheat protection, cut off the heating sources.
Automatic alarm after operation.
Suitable for constant temperature tests.
Suitable for bacteria cultivation, breeding, ferment.

Technical Specification: Model: IB-9025A Working size: 250x250x250mm/9.84x9.84x9.84inch Power: 150W Temperature range: Room temperature+5~65℃ Temperature resolution: 0.1℃ Temperature fluctuation: ±0.5℃ Timer: 0-9999min Voltage: 110V 60Hz / 220V 50Hz Dimension: 380x370x580mm/14.96x14.57x22.83inch Size: 52cm*46cm*75cm / 20.5in*18.2in*29.6in Gross Weight:42kg / 93lb Net Weight: 23kg / 51lb Warranty: 1 year

INCLIX™ is an immunochromatographic analyzer providing immediate point-of-care testing (POCT) at patient care settings or clinical laboratories. It facilitates automatic detection of various biomarkers for cardiovascular disease, infectious disease, cancer, diabetes, allergy, and etc. with high accuracy and sensitivity. INCLIX™ analyzer is a compact, easy-to-use and cost-effective multi-parameter POCT instrument and its unique user friendly software provides an efficient data management system. Features: • Good accuracy owning to superior CMOS sensor & our own Algorism • 10,000 test results data storage • Instrument Check by Reference Kit • Remote Support available (when connected via Internet) • Built-in Thermal Printer and Barcode Scanner • Data export to USB(PDF, Excel), Email and LIS • Storage Temperature of Test Cassette & Buffer : Room temperature, 2 ~ 30 ℃ • Shelf Life of Test Cassette & Buffer : 24 months

Click Here To Download Catalogue

Parameters: Na+,K+,Cl-, iCa++ / Li
It works on ISE principle
Sample Type: Whole blood, Serum, Plasma, Urine
Low reagent consumption
Sample requirement is only 90ul
60 samples per hour
Automatic two point calibration after 4hrs and one point calibration with each sample analysis
Air bubble detection
Track reagents consumption and provides alerts
For low reagent volume
Precision testing facility to get CV and SD
Trilevel Quality Control with LJ plots of last 30days
Low aspiration volume
Fast sample processing
Accurate and Precise results

Technical Specifications:

Parameters	Na+, K+, Cl– /Ca++
Principle	Ion Selective Electrode (ISE)
Sample Type	Analyses whole blood, serum, plasma and urine
Sample Volume	≤100 µL
Analysis Time	≤60 seconds
Throughout	≤60 samples per hour
Data Link	Serial (RS232)
External Interface	USB (Keyboard, Mouse)
Operating Condition	10° C to 35° C, Relative Humidity up to 85%
Storage Condition	Temp: 10° C to 40° C
Relative Humidity	up to 85% non- condensing
Power Supply	100 to 240 VAC ±10%, 50Hz
Dimensions	395 x 260 x 375 mm
Weight	7.5 kg

Click Here To Download Catalogue

Speed: 11,800rpm with 24- place rotor
RCF: 14,000g with 24-place rotor
Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
Brake: Automatic
Noise: 62dB running with 24-place rotor
Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
Weight: 5.1Kg net (without rotor)
Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
Construction: Aluminium casing with a steel lid
Finish: Body cream white baked enamel, with matt black baked enamel lid