Extractor ES-8000D

Purpose: ES-8000 D extractor shall be used for extraction concentration of heavy metals, petroleum hydrocarbons, polyaromatic hydrocarbons, organochlorine compounds and other pollutants from water samples by any organic solvents in separating funnels, round-bottomed flasks and flat-bottomed flasks, with the IM9 fluoroplastic turbine stirrer used to create high-speed radial liquid flows to ensure effective mixing and uniform distribution of extraction agent throughout the sample volume.

Extractor is provided with electronic stepless speed control unit.

Technical specifications: - Volume of water sample, L – 0.25-1.0 - Rotation speed of stirrer shaft, rpm - 100-3000 - Maximum power consumption, W - 50 - Supply voltage (50 Hz), V - 220 ± 10 - Overall dimensions, mm - 420х380х800 - Weight, kg – 8.5

Scope of delivery:  1. Overhead stirrer ES-8000 D - 1 pc. 2. ES-2720 rack for stirrers - 1 pc. 3. Clip – 2 pcs. 4. Fluoroplastic turbine stirrer IM9 – 1 pc. 5. ТS-2 sealing unit made of fluoroplastic - 1 pc. 6. Holding ring – 1 pc. 7. Round separating funnel (volume 1 L) – 1 pc.

*The same as Extractor PE-8300 (without timer)

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• LCD Backlight
• Small Blood Sample
• Splash Proof
• Strip Ejection
• Hgb/Hct
• Fast Result

• Measurement Range: 0-24.0 g/dL
• Power Supply: 3A battery X 2
• Testing Time (seconds): 5 seconds
• Sample Volume (μL): 1 μL
• Memory Capabilities: 100 sets with date and time
• Operating Temperature (°C): 10 °C~40 °C

Click Here To Download Catalogue

• Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
• Max. speed: 14,100 x g (14,500 rpm)
• Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
• Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
• Rotor can be autoclaved at 121°C for 20 minutes
• Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
• Eliminate costly repairs with the low maintenance drive
• Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Click Here To Download Catalogue

• Results in 20 Seconds

• 100µL sample drawn directly from primary EDTA tube

• Fully automated, walk-away operation

• Random access

• Positive patient identification via internal barcode reader

• Compatible with pediatric tube