Extractor PE-8000

Purpose: PE-8000 extractor shall be used for extraction concentration of heavy metals, petroleum hydrocarbons, polyaromatic hydrocarbons, organochlorine compounds and other pollutants from water samples by any organic solvents in separating funnels, round-bottomed flasks and flat-bottomed flasks, with the IM9 fluoroplastic turbine stirrer used to create high-speed radial liquid flows to ensure effective mixing and uniform distribution of extraction agent throughout the sample volume. Extractor is provided with electronic stepless speed control unit. Extractor is provided with built-in control unit with large LCD. It is possible to set a timer.

Technical specifications: - Volume of stirred sample, L – 1.0 - Rotation speed of stirrer shaft, rpm - 100-3000 - Maximum torque, H-cm - 60 - Maximum diameter stirrer shaft, mm - 10 - Accuracy of speed maintenance, rpm, at least - ±20 - Stirrer material – PTFE and stainless steel - Stirrer type – turbine - Maximum power consumption, W – 100 - Power supply voltage (50 Hz), V - 220 ± 10 - Overall dimensions (with rack), mm - 420х380х800 - Weight, kg – 9

Scope of delivery:  1. Overhead stirrer PE-8300 - 1 pc. 2. ES-2720 rack for stirrers - 1 pc. 3. Clamp for fastening the stirrer on the rack – 1 pc. 4. Clamp for fastening holding ring on the rack – 1 pc. 5. Fluoroplastic turbine stirrer IM9 – 1 pc. 6. ТS-2 sealing unit made of fluoroplastic - 1 pc. 7. Holding ring – 1 pc. 8. Round separating funnel – 1 pc.

• Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
• Max. speed: 14,100 x g (14,500 rpm)
• Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
• Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
• Rotor can be autoclaved at 121°C for 20 minutes
• Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
• Eliminate costly repairs with the low maintenance drive
• Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Click Here To Download Catalogue

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.