LTS-C100 Immunoassay Protein Analyzer

LTS-C100 Immunoassay Protein Analyzer

LTS-C100 protein joint detection analyzer adopts Enzyme-linked immunosorbent spot (ELISpot) assay for primary screening of infertility antibodies and auxiliary diagnosis. The reagent card adopts biochip technology to realize the joint detection of multiple indicators. The reagent card contains quality control bits and unit test points.

Advantages

• Accuracy

The reagent card adopts the ELISpot assay. It has the advantages of strong binding and anti-elution, reducing background color interference, etc., which significantly improves the detection sensitivity and specificity.

• Rapid

The reagent card can be used directly after unpacking. No need for material pretreatment, which effectively improves the efficiency.
It only takes 20 minutes for a single test, and 100 people can be tested in batches to meet most clinical usage scenarios.

• Convenience

Easy to operate, it only takes one sample punch to complete the test, and you can begin scanning while the reagent pack is incubating.
The new reagent test results are displayed in a simple, synchrony, and convenient.
The reagent card supports joint testing, which effectively improves clinical efficiency.

Reagent Card Inspection Items

Reagent Card

Test items include:

• Anti-sperm antibodies

• Anti-endometrial antibodies

• Anti-ovarian antibodies

• Anti-zona pellucida antibodies

• Anti-HCG antibodies

• Anti-cardiolipin antibodies

Procedure

1. Adding sample

2. Reaction and coloration

3. Signal collection

4. Interpret results

Methodology Comparison

The Clinical Significance

Technical Parameter

Instrument

• Dimension: 250 mm × 200 mm × 85 mm (L×W×H)

• Input Power: Less than 24 W

• Environment Temperature: 10 °C – 30 °C

• Relative Humidity: ≤ 85%

• Environment: Free from conductive dust, explosive and corrosive gases and sources of vibration

Reagents

• Store temperature: 2 °C – 8 °C

• Validity period date: 12 months

• Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
• Max. speed: 14,100 x g (14,500 rpm)
• Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
• Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
• Rotor can be autoclaved at 121°C for 20 minutes
• Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
• Eliminate costly repairs with the low maintenance drive
• Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Click Here To Download Catalogue

• Made of high quality PP material with good transparency.
• Applied for Gilson/Finland/Eppendorf Pipettors.
• Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
• Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
• Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

• Auto zero function: Manual blanking not required
• Dual wavelength measurement system:
• 2 wave lengths 455nm and 575nm
• Plays major role to remove the interference caused due to Hemolysis & turbidity of sample
• LED Light source:
• LED does not require replacement as it lasts longer
• As compared to Lamp, LED are more suitable as there is no intensity fluctuations
• No warm up time required.
• Flexible unit selection:
• Two units either mg/dl or umol/L are selectable, ease of reporting
• Compact slot for Capillary:
• Accuracy of results are directly related to proper alignment of Capillary
• B-111 has the easiest mode to ensure precise values
• Data transfer:
• External device can be connected to instrument through RS232 por
• USB port

• Light source - LED
• Wavelength - 455nm and 575nm
• Net weight - 1kg
• Measuring range - 0-30 mg/dl , 510 umol/L
• Display - 16×2 LCD module with backlight
• Auto calibration - Yes
• Sample type - Serum or plasma
• Sample volume - 40-80μL
• Test time - <5sec
• Units - mg/dl or umol/L
• Dimensions - 150 (W) × 115 (H) × 190 (D) mm
• Interface - RS232
• Reading cuvette - Heparinized micro capillary holder
• Storage temperature - 15-40°c
• Power supply - DC 9V(DC adapter)
• Power consumption - <2W

• Speed: 11,800rpm with 24- place rotor
• RCF: 14,000g with 24-place rotor
• Acceleration: 0-11,800rpm in 60 seconds, with 24-place rotor
• Brake: Automatic
• Noise: 62dB running with 24-place rotor
• Motor: High precision AC/DC series wound motor, brush gear, computer wound coil winding, balance armature and high speed bearings.
• Timer: 0-15 minute timer, graduated in 1 minute increments. Automatic switch at zero
• Weight: 5.1Kg net (without rotor)
• Dimensions: 23.5cm height x 27cm diameter, footprint 16cm diameter
• Construction: Aluminium casing with a steel lid
• Finish: Body cream white baked enamel, with matt black baked enamel lid

Click Here To Download Catalogue

• Lowest operation and tip ejection forces
• Fully autoclavable
• Ultra light weight with space-age materials
• Secondary adjustment option for various liquid classes
• Spring loaded tip con
• For transferring molecular samples and PCR mix solutions.
• One set is for DNA work and the other for RNA work. Each with the following specs
• Light weight, traditional tip shaft, and will fit all generic brands of tips
• Equal to or better than accuracy and precision compared to ISO 8655, so results can be trusted.
• Easy and quick volume adjustment with or without gloves. Foolproof volume lock prevents accidental volume changes.
• Low maintenance and autoclavable 121° for at least 20 minutes
• Quick release