| Description | Shipped from Abroad
The Mini 250 hearing test booth is ideal for series examinations, for example in schools, health authorities and occupational medicine. It takes up very little space and still offers very good noise insulation. Ready to start immediately: The Mini 250 is delivered completely assembled by MAICO. With the castors also preinstalled, it is easy to move - and can be used immediately!
Delivery & Availability:
Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | Shipped from Abroad
 It is a system with professional tool dedicated to exercise and resting ECG examination. Treadmill has 12 lead ECG modules. With ECG Analyzing Software.
Delivery & Availability:
Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | Shipped from Abroad
The Holta Monitor allows quick analysis of ECG examination and detection, reviewing and editing capability in the qualitative assessment of VE, VT, Single SVE, PSVT, Pauses, Irregular Rhythm, VT, IVR, Brady - and Tachycardia, Couplets, ST-segment elevation and depression, Maximum, Minimum and averaged Heart Rates, artifacts
Delivery & Availability:
Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | Shipped from Abroad
Ergometer CRG 200 is dedicated for Exercise Stress Tests System CardioTEST. The Ergometer has been designed according to modern technologies. It is controlled from PC equipped in CardioTEST software. Load level is controlled by a microprocessor, therefore it does not depend on speed, which in turn can be adjusted according to patient’s individual needs. Ergometer is equipped with ECG mode recording 12 standard leads.
Delivery & Availability:
Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | Shipped from Abroad
Electrocardiograph AsCARD Grey v.07.225 - is a 1, 3, 6, 12 channel ECG unit which enables to make electrocardiogram in full 12 leads. It is intended to conduct ECG examinations of adults and paediatric patients in all types of health care centres. ECG examination may be recorded in manual or automatic mode, with the possibility of analysis and interpretation. The device can be powered from 100 V ÷ 240 V mains supply or by an internal battery.
Delivery & Availability:
Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In Stock
GXR Analogue X-ray system matches with a radiographic room which perfectly fits your workow and can be easily upgraded to DR system with the help of DR interface and PC interface in GXR generator as well as Bucky suitable to Flat Panel Detector. GXR X-ray system is equipped with a high frequency X-ray generator which consistently produces high quality radiograph in favor of high quality X-ray output with a very small kV ripple and accurate mA and mAs. GXR X-ray system is designed to provide convenience to operator and comfort to patient.
Delivery & Availability:
Typically 21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. |
| Content | The Mini 250 hearing test booth is ideal for series examinations, for example in schools, health authorities and occupational medicine. It takes up very little space and still offers very good noise insulation. Ready to start immediately: The Mini 250 is delivered completely assembled by MAICO. With the castors also preinstalled, it is easy to move - and can be used immediately!
Features:
- Sound insulation up to 52 dB
- For audiometry with air and bone conduction, speech and all tests
- The sound-absorbing ventilation system ensures a good indoor climate
- Integrated socket strip and table for audiometer
- Security door with magnetic seal
- Large observation windows with laminated safety glass
Specifications:
- Internal dimensions: L x W x H: 604 x 860 x 1680 mm
- External dimensions: L x W x H: 827 x 990 x 1963 mm
| Â It is a system with professional tool dedicated to exercise and resting ECG examination. Treadmill has 12 lead ECG modules. With ECG Analyzing Software.
Technical Specification:
- Simultaneous registration and observation of ECG signal from all 12 leads on PC screen,
- Automatic measurement of HR, ST level and slope,
- Printing and archiving examination report which contains: patient's data, the full disclosure ECG of the whole recording, selected strips, average P-QRS-T complexes, table summary, load value, HR, ST level and slope,
- RAMP protocol
- PMHR control
- Digital filtration of mains disturbances
- Digital filtration of muscle origin disturbances
- Resting examination: 12, 6 or 3-channel in manual or automatic mode
- Automatic regulation of isoelectric line position in the middle of registration channel
- Automatic elimination of isoelectric line migration
CardioTEST Software:
- excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
- uninterrupted recording and presentation of 12-lead ECG signal, presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
- automatic HR measurement, ST level and ST segment slope,
- automatic control of cycloergometer and treadmill load,
- archiving and printing of the research report,
- automatic determination of measuring points with the possibility of manual correction,
- automatic arrhythmia analysis,
- presentation of parameters regarding: test phase, current load, stage time and total effort time,
- monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
- real-time ECG printout,
- preview of trends of all measured parameters during the test,
- alarm system for monitored parameters and arrhythmia,
- an option to automatically measure blood pressure,
- archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
- standard test protocols and the ability to define your own protocols also in RAMP mode,
- preview the report on the screen before printing the report,
- function of reanalysis of the performed test,
- presentation of 3D trends illustrating ST segment changes.
| The Holter Monitor allows quick analysis of ECG examination (arrhythmias and ST segment).
Technical specifications:
HolCARD 24W Software:
- fully compatible with Microsoft Windows environment
- unbeatable tool for alternative placement of electrodes
- independent analysis of the ST segment in all recorded channels, the positioning of all measurement points is user-reconfigurable and may depend on heart rate
- simultaneous arrhythmia detection in all three channels
- automatic signal calibration independent in all channels assures the use of all dynamic range available
- detection, reviewing and editing capability in the qualitative assessment of VE, VT, Single SVE, PSVT, Pauses, Irregular Rhythm, VT, IVR, Brady - and Tachycardia, Couplets, ST-segment elevation and depression, Maximum, Minimum and averaged Heart Rates, artifacts
- validation tool for beat classification making the correction easy and effective
- tabular hourly summaries all quantitative results
- printing of all recorded ECG signal available
AsPEKT 712 Recorder:
- 12-channel digital registration of the ECG signal
- 10-lead patient cable
- registration time: 48Â hours or 7 days on SDÂ card
- built-in the real time clock
- EVENT button
- pacemaker detection
- dimensions: 72x76x23 mm
| Ergometer CRG 200 is dedicated for Exercise Stress Tests System CardioTEST. The Ergometer has been designed according to modern technologies. It is controlled from PC equipped in CardioTEST software. Load level is controlled by a microprocessor, therefore it does not depend on speed, which in turn can be adjusted according to patient’s individual needs. Ergometer is equipped with ECG mode recording 12 standard leads.
Technical Specifications:
- Cooperation with the CardioTEST cardiovascular exercise system and AsTER cardiac rehabilitation system,
- Control using a computer through the RS-232 port,
- Braking: a processor-controlled brake with torque measurement,
- Load range: 25 - 1000 W,
- Speed ​​range: 20 - 150 rpm,
- Load independent of the number of turns,
- Built-in ECG module,
- 12 standard leads in diagnostic mode,
- 2 leads in training mode,
- Sensitivity 2,5 / 5/10/20 mm / mV,
- Shift 25/50/100 mm / s,
- Digital filters 25 Hz, 35 Hz, 50 Hz, anti-frit filter,
- Digital filter of the isoelectric line,
- Measuring range HR 15-240 bpm,
- Maximum patient weight 200 kg,
- Power supply: 230 V, 50 Hz, 60VA,
- Dimensions: (LxWxH) 1190x600x1370 mm.
CardioTEST Software:
- excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
- uninterrupted recording and presentation of 12-lead ECG signal,
- presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
- automatic HR measurement, ST level and ST segment slope,
- automatic control of cycloergometer and treadmill load,
- archiving and printing of the research report,
- automatic determination of measuring points with the possibility of manual correction,
- automatic arrhythmia analysis,
- presentation of parameters regarding: test phase, current load, stage time and total effort time,
- monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
- real-time ECG printout,
- preview of trends of all measured parameters during the test,
- alarm system for monitored parameters and arrhythmia,
- an option to automatically measure blood pressure,
- archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
- standard test protocols and the ability to define your own protocols also in RAMP mode,
- preview the report on the screen before printing the report,
- function of reanalysis of the performed test,
- presentation of 3D trends illustrating ST segment changes.
|
Electrocardiograph AsCARD Grey v.07.225 - is a 1, 3, 6, 12 channel ECG unit which enables to make electrocardiogram in full 12 leads. It is intended to conduct ECG examinations of adults and paediatric patients in all types of health care centres. ECG examination may be recorded in manual or automatic mode, with the possibility of analysis and interpretation. The device can be powered from 100 V ÷ 240 V mains supply or by an internal battery.
Technical Specification:1. Visualisation of 1, 3, 6 or 12 ECG waveforms, analysis results and interpretations, examinations stored in memory.
2. Recording of 12 standard leads.
3. Print out in 1, 3, 6 or 12 ECG waveforms mode. Printing of a selected group:
- 1 channel - (I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6),
- 3 channels in standard format - (I-II-III, aVR-aVL-aVF, V1-V2-V3, V4-V5-V6),
- 3 channels in Cabrera format - (aVL-I-aVR, II-aVF-III, V1-V2-V3, V4-V5-V6),
- 6 channels in standard format - (I-II-III-aVR-aVL-aVF, V1-V2-V3-V4-V5-V6),
- 6 channels in Cabrera format - (aVL-I-aVR-II-aVF-III, V1-V2-V3-V4-V5-V6),
- 12 channels in standard format - (I-II-III-aVR-aVL-aVF-V1-V2-V3-V4-V5-V6),
- 12 channels in Cabrera format - (aVL-I-aVR-II-aVF-III-V1-V2-V3-V4-V5-V6).
4. Available types of examinations: manual, AUTO, SPIRO, automatic to clipboard, AUTOMANUAL, LONG (v.07.xx5).
5. Automatic record ECG signal from all 12 leads simultaneously, with save to temporary memory function, then depending on the settings:
print out examination's result, analysis, interpretation or save to database.
6. Adjustable length of automatic examination recording — interval of 6–30 seconds.
7. Reverse recording in automatic examination to clipboard and in manual examination (v.07.xx5).
8. Rhythm print out in AUTO examination and automatic examination to clipboard.
9. Definable stages of examination according to set up parameters in AUTOMANUAL examination.
10. Storing an examination in memory, 1–15 minutes in LONG mode (v.07.xx5).
11. ECG printed directly from the electrocardiograph using PCL5/6 printer.
12. Printout from database. Possibility to printout additional information about examination or patient.
13. Alpha-numerical soft-key keyboard with functional buttons.
14. Possibility to set parameters: speed, sensitive, intensity of printing.
15. Menu displayed on the screen for easy operation using touch panel.
16. Database of patients and examinations. Internal memory up to 1000 patients, 1000 examinations.
17. Viewing of the memory-stored examinations on display, with the possibility of changing the number of leads, augmentation and speed.
18. Automatic analysis and interpretation in compliance with EN 60601-2-51 (CSE database) - Analysis and interpretation dependable on age & sex of a patient.
19. Up to 130 automatic examinations in battery mode.
20. Continuous heart rate (HR) measurement and display.
21. Adapted to direct operation on an open heart.
22. Device allows to enable and disable the following filters:
- power line interference filter; filters available: 50 Hz, 60 Hz,
- muscle interference filter; filters available: 25 Hz, 35 Hz, 45 Hz,
- contour line filters; filters available: 0.15 Hz, 0.45 Hz, 0.75 Hz, 1.5 Hz,
- the low-pass filter (v.07.224, v.07.324, v.07.225, v.07.325): 75 Hz, 100 Hz, 125 Hz, 150 Hz,
- the auto-adaptive filter (v.07.224, v.07.324, v.07.225, v.07.325).
23. Detection of electrode detachment, independent for each channel (INOP control).
24. Detection of cardiac stimulator.
25. Sound signalling of detected stimulations of heart stimulator.
26. Protection against defibrillation pulse.
27. ECG recordings optionally saved on PenDrive, send on email or to other AsCARD via EKG-MAIL.
28. Wireless communication with the LAN or the Internet (v.07.3xx).
29. Wired communication with the LAN or the Internet.
30. Cooperation with CardioTEKA and CardioTEL.
31. Possibility of accepting orders for examination and sending back the results in HL7 standard via Internet (v.07.3xx).
32. Possibility of conducting preliminary spirometry examinations by using SPIRO-31 attachment.
33. EMR – keep performed examinations in specified period of time on external data storage (USB memory).
Accessories
1. Limb electrodes, 4 pieces (EKK type).
2. Chest electrodes, 6 pieces (EPP type).
3. KEKG 30R ECG cable.
4. Main cable.
5. R-A4 paper, 112 mm wide (1 reel).
6. ECG gel.
7. Operation manual.
| DrGem GXR Floor Mounted Analogue X-ray system matches with a radiographic room which perfectly fits your workflow and can be easily upgraded to DR system with the help of DR interface and PC interface in GXR generator as well as Bucky suitable to Flat Panel Detector. GXR (Analogue X-ray)system is equipped with a high frequency X-ray generator which consistently produces high quality radiograph in favor of high quality X-ray output with a very small kV ripple and accurate mA and mAs. GXR (Analogue X-ray) system is designed to provide convenience to operator and comfort to patient.
Features of DrGem GXR Floor Mounted Analogue X-ray:
- 4 way Tabletop Patient Table (PBT-4)
A large tabletop with extended travel enables all radiography studies with minimal patient movement, and supporting patient weight up to 300kg. Fully at tabletop without a frame on the edge makes cleanliness and odors free
- Floor Mount Tube Stand (TS-FM6)
Floor Rail type tube stand provides all radiography studies with smooth movement on the rail.
- Wall Bucky Stand (WBS)
Elegant design, durable and easy-to-use Wall Bucky Stand provides full satisfaction.
Technical Specifications of DrGem GXR Floor Mounted Analogue X-ray:
- Power Rating - 32KW
- Generator - GXR-32S
- Rotor - Dual Speed Starter(DSS)
- Input Power - 400/480VAC, Three phase
- Line Frequency - 50/60Hz
- X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU)
- Tube Voltage - 40 to 150kV, 1kV Step
- Tube Current – 10 to 640mA
- Output - 640mA@81kV, 500mA@104kV, 400mA@130kV, 320mA@150kV
- Time Range - 1ms to 10s
- mAs Range - 0.1 to 800mAs
- Reproducibility - CoeÂcient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01
- Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs)
- Linearity - CoeÂcient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs
|
Reviews
There are no reviews yet.