mini-MIRI-dry-incubator-front-left_with_filter

Mini MIRI Dry Incubator

Brands: Esco Medical

~~$0.00~~

Shipped From Abroad

The Mini MIRI^® Dry incubator is a two-chamber mini bench-top incubator that takes after the classic MIRI^® Multiroom incubator. This mini version of the MIRI^® is a perfect fit for IVF laboratories that prioritize footprint and affordability.

Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Brands:: Esco Medical

Description
Reviews (0)

Description

Recirculating Gas for Minimal Gas Consumption

The Mini MIRI® Dry Incubator is a dry IVF bench-top incubator that can recirculate gas inside the incubator and is compatible with a VOC/HEPA filtration system, unlike other humidified IVF incubators. Gas inserts (whether pure N₂ and CO₂ or premixed gas) first go through the tri-gas mixing chamber to achieve the set CO₂ and O₂ gas concentrations by the user, and then into the VOC/HEPA filter before entering the incubator chambers. After this, gas now enters a UV Sterilization (254nm) table before going back to the tri-gas mixing chamber and recirculating the gas. This system ensures that there is minimal gas consumption even with lid openings of the incubator chambers while maintaining the recirculating air clean and safe for the embryo samples.

Data Logger Software

The Mini MIRI^® Dry Incubator comes with data logger software that monitors the temperature, gas concentration, gas input pressure, gas flow rates, and alarms. All real-time parameters can be viewed conveniently in graphs when the Mini MIRI^® is connected to a PC, and the data logger software can also monitor multiple incubators at the same time. Weekly reports can be exported for the users’ convenience.

Specifications

Overall Dimensions (W x D x H)	525 x 420 x 230 mm (22.7 x 16.5 x 9″)
Weight	22 kg (48.5 lbs)
Material	Mild steel / Aluminum / PET / Stainless steel
Power Supply	115V 60Hz or 230V 50Hz
Power Consumption	160 W
Temperature Control Range	24.9 – 40 °C
*CO₂ Gas Consumption	<2 Liters per hour
**N₂ Gas Consumption	<8 Liters per hour
Gas Input Pressure	0.4 to 0.6 bar (5.80 – 8.70 PSI)
Operating Altitude	Up to 2000 meters (6560 feet or 80kPa – 106kPa)
Shipping Weight	30 kg (66.1 lbs) (Including the pallet’s weight)
Shipping Dimensions	630 x 525 x 500 mm (24.8 x 20.7 x 19.7″) (device on the pallet)

Reviews

There are no reviews yet.

Be the first to review “Mini MIRI Dry Incubator”

Quick Comparison

Mini MIRI Dry Incubator remove Eppendorf Minispin Centrifuge remove Skyla Hi POC Clinical Chemistry Analyzer remove Avalun 48 INR Microcuvette remove Eppendorf Pipette Tip 200ul Per Pack remove IISM VPism-C (Compact Type) Vein Probe remove

Name Mini MIRI Dry Incubator remove Eppendorf Minispin Centrifuge remove Skyla Hi POC Clinical Chemistry Analyzer remove Avalun 48 INR Microcuvette remove Eppendorf Pipette Tip 200ul Per Pack remove IISM VPism-C (Compact Type) Vein Probe remove

Image

SKU SF1033560084-116 SF1033560060-2 SF1033560084-74 SF1033560084-137 SF1033560090-1

Rating

Price

~~$0.00~~

Stock

Out of stock

Availability Out of stock

Add to cart

Description

Shipped From Abroad The Mini MIRI^® Dry incubator is a two-chamber mini bench-top incubator that takes after the classic MIRI^® Multiroom incubator. This mini version of the MIRI^® is a perfect fit for IVF laboratories that prioritize footprint and affordability.

Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Powerful and user-friendly MiniSpin Centrifuge are small enough so that each workstation can be equipped with a “personal” centrifuge. The rotor, inner centrifuge lid, and lid latch are made of metal for maximum operation safety. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad The skyla Hi POC Clinical Chemistry Analyzer provides clinical testing laboratories of medical facilities and clinics with an in-vitro clinical chemistry diagnostic tool that is compact, portable, and reports rapid results.The use of skyla Hi in the management of diabetes enables better access to testing and rapid clinical decision making, discussion,and implementation of optimized treatment. Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Out stock LabPad®’s versatility comes especially from its Tsmart® single-use microcuvette, which contains a lyophilized reagent specific to each test. The Tsmart® microcuvette is the fruit of numerous innovations that have led to many benefits for users. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

In stock

Made of high quality PP material with good transparency.
Applied for Gilson/Finland/Eppendorf Pipettors.
Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Shipped from Abroad The iiSM VPism-C Vein Probe - Compact Unit is a compact, non-invasive infrared device to view blood vessels just beneath the skin. Includes a camera, touchscreen display, connector cable, power supply, camera stand, gooseneck arm, and instruction manual. Delivery & Availability: Typically 10 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.

Content

Recirculating Gas for Minimal Gas Consumption

Data Logger Software

Specifications

Overall Dimensions (W x D x H)	525 x 420 x 230 mm (22.7 x 16.5 x 9")
Weight	22 kg (48.5 lbs)
Material	Mild steel / Aluminum / PET / Stainless steel
Power Supply	115V 60Hz or 230V 50Hz
Power Consumption	160 W
Temperature Control Range	24.9 - 40 °C
*CO₂ Gas Consumption	<2 Liters per hour
**N₂ Gas Consumption	<8 Liters per hour
Gas Input Pressure	0.4 to 0.6 bar (5.80 - 8.70 PSI)
Operating Altitude	Up to 2000 meters (6560 feet or 80kPa - 106kPa)
Shipping Weight	30 kg (66.1 lbs) (Including the pallet's weight)
Shipping Dimensions	630 x 525 x 500 mm (24.8 x 20.7 x 19.7") (device on the pallet)

Rotor capacity: 12 x 1.5/2.0 mL vessels, 2 x PCR strip
Max. speed: 14,100 x g (14,500 rpm)
Extremely compact footprint — measures 9”W x 4.”H x 9ó”D!
Aluminum rotor accommodates twelve 1.5- or 2.0-mL tubes (maximum diameter of 11 mm)
Rotor can be autoclaved at 121°C for 20 minutes
Minimal sample heat transfer — maximum of 12°C after 20 minutes at max speed
Eliminate costly repairs with the low maintenance drive
Soft-touch lid closure for ergonomic lid locking — and releases automatically at the end of a run

Technical Specifications:

Speed:	800 – 13,400 rpm (100 rpm steps)
Capacity:	12 x 1.5/2.0 mL
Electrical:	120 V, 60 Hz
Dimensions:	(W x D x H) 22.6 x 23.9 x 12.0 cm
Weight:	4.3 kg

Click Here To Download Catalogue

skyla Hi Analyzer enables better access to testing and rapid clinical decision making, discussion, and implementation of optimized treatment. To get the result, only prepare <1 μl fingertips blood or venous blood (depends on test item) without pretreatment with easy steps and then read the result after 6 mins. The device allows two specimens be tested in one run and provides fully automatic procedures from checking the validity of cartridge to printing the results. Reagent Kit

HbA1C
CRP
Lipid Panel (TC,TG, HDL, LDL#)
Lipid Plus Panel (Glu,TC,TG, HDL, LDL#)

Main Specification

Principle

Turbidimetric Method / Biochemistry

Device

Testing Time

5~20 minutes (depends on test items)

Display and Interface

5″ TFT color touch screen LCD

Memory Capacity

50,000 test results

Dimension of Analyzer

270 x 188 x 148 mm

Weight of Analyzer

1.7 kg

Dimension of Printer Module

134 x 100 x 82.7 mm

Weight of Printer Module

0.37 kg

Power Supply

100~240 volts AC, 50-60Hz

Data Transmission

USB 2.0*4 / USB 3.0*1 / RS232*1 / RJ45*1 / Wi-Fi (optional)

Reagent and Samples

Samples

Fingertips blood or venous blood

Samples Volume

0.8 ~ 30 μL (depends on test item)

Storage Temperature (Reagent)

2 ~ 8˚C

Humidity

Relative humidity < 95% (Non-condensing)

Temperature

10 ~ 32 ˚C

Click Here To Download Catalogue

LabPad®’s versatility comes especially from its Tsmart® single-use microcuvette, which contains a lyophilized reagent specific to each test. The Tsmart® microcuvette is the fruit of numerous innovations that have led to many benefits for users.

Features:

Fully automated "plug-and-play" behavior
Reduced blood volume (only 3µL)
A large space for blood drop-off
Fills up quickly, using just capillarity
Easy handling, thanks to its 3D shape
Optimized preservation in individual pouches, in boxes of 12, 24, or 48 units

Made of high quality PP material with good transparency.
Applied for Gilson/Finland/Eppendorf Pipettors.
Carefully inspect of raw material and manufactured under strict process check, all tips are with excellent accuracy and precison.
Special siliconizing on the inner surface ensure no liquid adhesion and accurate sample transfer.
Standard tips and filter tips can be autoclaved, high temperature sterilization acceptable.

Classification: PIPETTE Brand Name: Vchanslab,Yingmed,OEM Model Number: YM-K7028 Place of Origin: China Product name: Pipette Tips Material: Polypropylene Certificate: CE/ISO13485/FDA Color: Natural, Blue, Yellow Application: Laboratory, Teaching, Hospital

The iiSM VPism-C Vein Probe - Compact Unit is a compact, non-invasive infrared device to view blood vessels just beneath the skin. Includes a camera, touchscreen display, connector cable, power supply, camera stand, gooseneck arm, and instruction manual. This handheld, portable device is lightweight and includes the touchscreen and camera with attached clip. The camera can be removed and handled by hand, or can clip to the touchscreen unit for a hands-free experience. The back of the device also has a kickstand, so that physicians can stand the device on its own. The VPism-C can also be mounted to an armrest, if a patient needs to be stationary, or attached to a SLism-F Specialized Light Source for patients with deeper vessels. This device can be a vital tool in providing accurate placement of injections or other vascular treatments, such as for varicose veins. The infrared video shows the location of the veins and capillaries in real time, as well as save images for further discussion or diagnosis. For patients who have difficult-to-find veins, this device will save them from incorrect or painful injection sites. Features: Probe Target: Subcutaneous blood vessels of various patients (including capillaries) Probe Method: Non-invasive infrared technology Probe Depth: Within 10 mm under the skin Magnification Function: Up to 1X, 2X and 4X Automatic Adjustment Function: Adjusts the brightness automatically based on the targeted vein Specialized Light Function: Shows the veins more clearly by using the specialized light source Operation Method: Easy to operate with touchscreen Internal Battery Support: Continuous running time: 1.5 hours Warranty: 1 year