New
Mini MIRI Dry Incubator
$0.00
Shipped From Abroad
The Mini MIRI® Dry incubator is a two-chamber mini bench-top incubator that takes after the classic MIRI® Multiroom incubator. This mini version of the MIRI® is a perfect fit for IVF laboratories that prioritize footprint and affordability.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Description
Recirculating Gas for Minimal Gas Consumption
The Mini MIRI® Dry Incubator is a dry IVF bench-top incubator that can recirculate gas inside the incubator and is compatible with a VOC/HEPA filtration system, unlike other humidified IVF incubators. Gas inserts (whether pure N2 and CO2 or premixed gas) first go through the tri-gas mixing chamber to achieve the set CO2 and O2 gas concentrations by the user, and then into the VOC/HEPA filter before entering the incubator chambers. After this, gas now enters a UV Sterilization (254nm) table before going back to the tri-gas mixing chamber and recirculating the gas. This system ensures that there is minimal gas consumption even with lid openings of the incubator chambers while maintaining the recirculating air clean and safe for the embryo samples.
Data Logger Software
The Mini MIRI® Dry Incubator comes with data logger software that monitors the temperature, gas concentration, gas input pressure, gas flow rates, and alarms. All real-time parameters can be viewed conveniently in graphs when the Mini MIRI® is connected to a PC, and the data logger software can also monitor multiple incubators at the same time. Weekly reports can be exported for the users’ convenience.
Specifications
| Overall Dimensions (W x D x H) | 525 x 420 x 230 mm (22.7 x 16.5 x 9″) |
| Weight | 22 kg (48.5 lbs) |
| Material | Mild steel / Aluminum / PET / Stainless steel |
| Power Supply | 115V 60Hz or 230V 50Hz |
| Power Consumption | 160 W |
| Temperature Control Range | 24.9 – 40 °C |
| *CO2 Gas Consumption | <2 Liters per hour |
| **N2 Gas Consumption | <8 Liters per hour |
| Gas Input Pressure | 0.4 to 0.6 bar (5.80 – 8.70 PSI) |
| Operating Altitude | Up to 2000 meters (6560 feet or 80kPa – 106kPa) |
| Shipping Weight | 30 kg (66.1 lbs) (Including the pallet’s weight) |
| Shipping Dimensions | 630 x 525 x 500 mm (24.8 x 20.7 x 19.7″) (device on the pallet) |
Quick Comparison
| Settings | Mini MIRI Dry Incubator remove | Plastic Urine Container Per Pack remove | Skyla Hi POC Clinical Chemistry Analyzer remove | Zenithlab (IB-9025A) Laboratory Incubator remove | iSED Fully Automated ESR Analyzer remove | Eppendorf Pipette Tip 200ul Per Pack remove | ||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Mini MIRI Dry Incubator remove | Plastic Urine Container Per Pack remove | Skyla Hi POC Clinical Chemistry Analyzer remove | Zenithlab (IB-9025A) Laboratory Incubator remove | iSED Fully Automated ESR Analyzer remove | Eppendorf Pipette Tip 200ul Per Pack remove | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | SF1033560084-106 | SF1033560060-2 | SF1033560084-109 | SF1033560084-129 | SF1033560084-137 | |||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price |
| $8.20 |
| $350.00 |
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Shipped From Abroad
The Mini MIRI® Dry incubator is a two-chamber mini bench-top incubator that takes after the classic MIRI® Multiroom incubator. This mini version of the MIRI® is a perfect fit for IVF laboratories that prioritize footprint and affordability.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
| In stock
| Shipped from Abroad The skyla Hi POC Clinical Chemistry Analyzer provides clinical testing laboratories of medical facilities and clinics with an in-vitro clinical chemistry diagnostic tool that is compact, portable, and reports rapid results.The use of skyla Hi in the management of diabetes enables better access to testing and rapid clinical decision making, discussion,and implementation of optimized treatment. Delivery & Availability: Typically 14 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information. | In stock
| In stock
| In stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Recirculating Gas for Minimal Gas ConsumptionThe Mini MIRI® Dry Incubator is a dry IVF bench-top incubator that can recirculate gas inside the incubator and is compatible with a VOC/HEPA filtration system, unlike other humidified IVF incubators. Gas inserts (whether pure N2 and CO2 or premixed gas) first go through the tri-gas mixing chamber to achieve the set CO2 and O2 gas concentrations by the user, and then into the VOC/HEPA filter before entering the incubator chambers. After this, gas now enters a UV Sterilization (254nm) table before going back to the tri-gas mixing chamber and recirculating the gas. This system ensures that there is minimal gas consumption even with lid openings of the incubator chambers while maintaining the recirculating air clean and safe for the embryo samples.
Data Logger SoftwareThe Mini MIRI® Dry Incubator comes with data logger software that monitors the temperature, gas concentration, gas input pressure, gas flow rates, and alarms. All real-time parameters can be viewed conveniently in graphs when the Mini MIRI® is connected to a PC, and the data logger software can also monitor multiple incubators at the same time. Weekly reports can be exported for the users' convenience.
Specifications
|
| skyla Hi Analyzer enables better access to testing and rapid clinical decision making, discussion, and implementation of optimized treatment. To get the result, only prepare <1 μl fingertips blood or venous blood (depends on test item) without pretreatment with easy steps and then read the result after 6 mins. The device allows two specimens be tested in one run and provides fully automatic procedures from checking the validity of cartridge to printing the results.
Reagent Kit
Main SpecificationPrinciple
Turbidimetric Method / Biochemistry
Device
Testing Time
5~20 minutes (depends on test items)
Display and Interface
5″ TFT color touch screen LCD
Memory Capacity
50,000 test results
Dimension of Analyzer
270 x 188 x 148 mm
Weight of Analyzer
1.7 kg
Dimension of Printer Module
134 x 100 x 82.7 mm
Weight of Printer Module
0.37 kg
Power Supply
100~240 volts AC, 50-60Hz
Data Transmission
USB 2.0*4 / USB 3.0*1 / RS232*1 / RJ45*1 / Wi-Fi (optional)
Reagent and SamplesSamples
Fingertips blood or venous blood
Samples Volume
0.8 ~ 30 μL (depends on test item)
Storage Temperature (Reagent)
2 ~ 8˚C
HumidityRelative humidity < 95% (Non-condensing)
| Features:
| The technical innovation of the iSED® fully-automated ESR analyzer consists of directly measuring the intensity of the red cell aggregation which is responsible for Erythrocyte Sedimentation Rate (ESR). Unlike traditional ESR methodologies that measure the aggregation of the red blood cells indirectly, the iSED measures it directly and expresses the values in mm/hr.
Features:
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
Reviews
There are no reviews yet.