MRI Table with hydraulic height adjustment

$0.00

Shipped From Abroad

MRI Patient transport tables up to 7 Tesla – with hydraulic height adjustment for an optimal height

Due to the mobile nature of the MRI stretchers and the associated flexibility of use, a motor drive for height adjustment was omitted. Hydraulics are independent of the power supply and can therefore be operated anywhere and at any time. The hydraulics are operated via a foot pump. The advantage of these hydraulic height-adjustable MRI patient transport tables is that they are suitable for MR systems with different patient table heights and make it easier for patients to get on and off. The hydraulic height-adjustable MRI tables can be used safely under the following conditions:

  • Static magnetic field of a maximum of 7 Tesla or less,
  • With an additional spatial gradient of a maximum of 10 T/m or less,
  • The table must not exceed the limit line of 10 T/m with the head end/foot end in the direction of movement towards the magnet.
Delivery & Availability:
Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
SF1033560130137-8

Description

Features
  • The hydraulic height-adjustable MRI patient transport tables are equipped with castors, Ø 100 mm. All four can be completely locked in rotation and running directions.
  • They are available in two widths:
    • Width 650 mm, Article No.: H-U 3065/Y 980LRVA,
    • Width 800 mm, Article No.: H-EKG 3080/Y 980LRVA.
  • The tubular steel frame of the hydraulic height-adjustable MRI tables is made of stainless steel, with a low residual magnetism.
  • The hydraulic height adjustment is operated using a foot pump. The foot pump can be mounted on both sides (please specify the desired side when placing the order). A second foot pump is also available for a surcharge (Article No.: FPH-30).
  • The height-adjustable MRI tables can be used with a static magnetic field of a maximum of 7 Tesla or less.
  • The thickness of the two upholstered segments (headrest and main surface) is 64 mm.
  • The headrest can be adjusted continuously up to +40°. It is locked using a handle using a clamping rod mechanism.

 

Technical data
MRI Patient transport tables
with hydraulic height adjustment
Article number H-U 3065/Y 980LRVA H-EKG 3080/Y 980LRVA
Frame Stainless steel
Length
Headrest / main section
1,900 mm
500 / 1,400 mm
Width 650 mm 800 mm
Height adjustment 620 – 980 mm (hydraulic)
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40° (clamping rods)
Load capacity 200 kg
Castors Ø 100 mm, all 4 with locking function
The standard configuration includes:
  • A set of castors, consisting of four swivel castors, Ø 100 mm. All four castors are lockable.

 

Accessories & additional options
Article No. Description
FPH-30 Foot pedal, MR-compatible, with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides.
INF-1720/VA Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent.
P-3050/A
P-3070/A
Paper roll holder, for table width 650 mm.
Paper roll holder, for table width 800 mm.With mounting hardware, made of CrNi steel, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm) and a paper roll holder bar (length 515 / 690 mm, Ø 8 mm), for mounting at the foot end of the upholstered frame.
PG-220
PG-260
Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables.
Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables.
Sewn from synthetic leather, with Velcro fastener (hook and loops straps), see upholstery colours.
ULKRS-4022 All-around edge/impact protection, black, dimensions approx. 40 x 22 mm, with aluminium insert, mounted on the upholstery frame (and on the side rails). Retrofitting is not possible.

Reviews

There are no reviews yet.

Be the first to review “MRI Table with hydraulic height adjustment”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsMRI Table with hydraulic height adjustment removeFolding Stretcher removeCeiling Mounted Nine (9) Halogen Bulbs removeTPLUS -3015 Emergency Cart removeETJ-10A Bedside Cabinet removeDrip Stand remove
NameMRI Table with hydraulic height adjustment removeFolding Stretcher removeCeiling Mounted Nine (9) Halogen Bulbs removeTPLUS -3015 Emergency Cart removeETJ-10A Bedside Cabinet removeDrip Stand remove
ImageLinealife TECHNOplus TPS-3015 Emergency CartsLinealife FCS-5030 Bedside Cabinet
SKUSF1033560130137-8SF1033560084-102SF1033560084-156SF1033560008SF1033560008-12SF1033560084-67
Rating
Price

$0.00

$40.00

$0.00

$1,155.00

$0.00

$27.00

Stock
Availability
Add to cart

DescriptionShipped From Abroad
MRI Patient transport tables up to 7 Tesla - with hydraulic height adjustment for an optimal height
Due to the mobile nature of the MRI stretchers and the associated flexibility of use, a motor drive for height adjustment was omitted. Hydraulics are independent of the power supply and can therefore be operated anywhere and at any time. The hydraulics are operated via a foot pump. The advantage of these hydraulic height-adjustable MRI patient transport tables is that they are suitable for MR systems with different patient table heights and make it easier for patients to get on and off. The hydraulic height-adjustable MRI tables can be used safely under the following conditions:
  • Static magnetic field of a maximum of 7 Tesla or less,
  • With an additional spatial gradient of a maximum of 10 T/m or less,
  • The table must not exceed the limit line of 10 T/m with the head end/foot end in the direction of movement towards the magnet.
Delivery & Availability: Typically 10-21 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock
  • Made from high strength Aluminium alloy and Nylon mesh.
  • Folds conveniently, and includes carry bag with straps.
  • Orange colour
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
In stock Ceiling 9-reflector luminescence shadowless lamp adopts light sources from different positions for focus, providing illumination for surgical operations and medical examination and reducing shadows produced by different parts of medical workers. Illumination can be adjusted according to practical requirements. The lamp is fit for lighting for surgical operations and medical examination in hospitals.
Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Shipped from Abroad TPLUS -3015 Emergency Cart designed to provide easy to use storage for modern practice. They are manufactured using a combination of modern and traditional materials to provide a robust trolley with a modern look and feel. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.Shipped from Abroad ETJ-10A Bedside Cabinet is designed to provide easy to use storage for modern practice. They are manufactured using a combination of modern and traditional materials to provide a robust trolley with a modern look and feel. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.In stock Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Delivery & Availability: Typically 5-7 working days – excluding furniture and heavy/bulky equipment. Please contact us for further information.
Content
Features
  • The hydraulic height-adjustable MRI patient transport tables are equipped with castors, Ø 100 mm. All four can be completely locked in rotation and running directions.
  • They are available in two widths:
    • Width 650 mm, Article No.: H-U 3065/Y 980LRVA,
    • Width 800 mm, Article No.: H-EKG 3080/Y 980LRVA.
  • The tubular steel frame of the hydraulic height-adjustable MRI tables is made of stainless steel, with a low residual magnetism.
  • The hydraulic height adjustment is operated using a foot pump. The foot pump can be mounted on both sides (please specify the desired side when placing the order). A second foot pump is also available for a surcharge (Article No.: FPH-30).
  • The height-adjustable MRI tables can be used with a static magnetic field of a maximum of 7 Tesla or less.
  • The thickness of the two upholstered segments (headrest and main surface) is 64 mm.
  • The headrest can be adjusted continuously up to +40°. It is locked using a handle using a clamping rod mechanism.
 
Technical data
MRI Patient transport tables with hydraulic height adjustment
Article number H-U 3065/Y 980LRVA H-EKG 3080/Y 980LRVA
Frame Stainless steel
Length Headrest / main section 1,900 mm 500 / 1,400 mm
Width 650 mm 800 mm
Height adjustment 620 - 980 mm (hydraulic)
Upholstery segments 2 sections
Upholstery thickness 64 mm
Headrest adjustment +40° (clamping rods)
Load capacity 200 kg
Castors Ø 100 mm, all 4 with locking function
The standard configuration includes:
  • A set of castors, consisting of four swivel castors, Ø 100 mm. All four castors are lockable.
 
Accessories & additional options
Article No. Description
FPH-30 Foot pedal, MR-compatible, with transmission shaft and connecting piece. This allows the hydraulic height adjustment to be operated from both sides.
INF-1720/VA Infusion holder, CrNi steel, bottle cross with 4 hooks, infusion rod 1,700 mm long, Ø 18 mm, includes a screw-on fastening clamp, which is fixed on the left or right side of the upholstery frame (please specify when placing the order). Retrofitting is only possible to a limited extent.
P-3050/A P-3070/A Paper roll holder, for table width 650 mm. Paper roll holder, for table width 800 mm.With mounting hardware, made of CrNi steel, consisting of two mounting kits (square steel tube 30 x 30 x 2 mm, length approx. 150 mm) and a paper roll holder bar (length 515 / 690 mm, Ø 8 mm), for mounting at the foot end of the upholstered frame.
PG-220 PG-260 Patient belt, dimensions 2,200 x 250 mm (L x W), for 650 mm wide tables. Patient belt, dimensions 2,600 x 250 mm (L x W), for 800 mm wide tables. Sewn from synthetic leather, with Velcro fastener (hook and loops straps), see upholstery colours.
ULKRS-4022 All-around edge/impact protection, black, dimensions approx. 40 x 22 mm, with aluminium insert, mounted on the upholstery frame (and on the side rails). Retrofitting is not possible.
  • Made from high strength Aluminium alloy and Nylon mesh.
  • Folds conveniently, and includes carry bag with straps.
  • Orange colour
Ceiling 9-reflector luminescence shadowless lamp adopts light sources from different positions for focus, providing illumination for surgical operations and medical examination and reducing shadows produced by different parts of medical workers. Illumination can be adjusted according to practical requirements. The lamp is fit for lighting for surgical operations and medical examination in hospitals. Technical Specifications: Light Intensity: ≥100,000LX (At 1m Distance) Color Rendering Index: Ra ≥90 Color Temperature: 4000K±500K Main Voltage: AC 220V + 22V, 50/60Hz Bulb Voltage: AC24V Bulb Power Input Power: 280VA Rated Power Of Bulb: 25W Height For Installation: 280-320cmDETAILS • Antibacterial ABS top. • Drawers with telescopic rails. • HPL drawers with aluminium frame. • Frame painted with epoxy powder. • HPL defibrillator table. • Resuscitation table. • Serum holder. • Two with brake casters. • SS handles. • Aluminium push handle. • Dustbin. • D: 61O mm • W: 840 mm • H: 1080 mm  

ETJ-10A Bedside Cabinet

DETAILS • Width : 45 cm • Depth : 50 cm • Height : 66 cm • HPL ( compact ) top table. • One cabinet and telescopic drawer. • Main frame is made of laminate and aluminium profile. • Plastic castors.  
Drip Stand is a very simple, easy to adjust and maneuver product. Suitable for most healthcare environments, this drip stand is light in weight made of high-quality stainless steel. Use : Bedridden patients, Senior citizen care, Patients in coma Advantages :
  • High quality stainless steel construction
  • Properly electroplated for anti rust finish
  • Ball shaped castors for smooth movement
  • Provided with an infusion stand
  • Attached 4 pcs hook
  • Maximum load strength
  • Screw safety height adjustment
  • Light weight
   
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • Rating
  • Price
  • Description
Click outside to hide the comparison bar
Compare