MyLab X1 Go ultra-slim Ultrasound System

MyLab X1 Go brings portability and performance together in a compact form. With only 1.2 kg weight and dimensions of 153 × 242 × 16.5 mm, it fits easily into ambulatory, emergency, mobile-unit, or bedside workflows. The 8″ HD touchscreen supports intuitive gestures—even with gloves—and a fast boot-up (< 30 seconds) ensures readiness. The system supports broad probe types, automatic image optimization, and intelligent measurements, and communicates securely via DICOM, USB-C, HDMI, Bluetooth, and wireless streaming. Cleanable surfaces and a durable build make it suitable for clinical hygiene-sensitive environments.

Assist with care wherever it is needed

Features

• Ultra-light construction: approx. 1.2 kg.

• Compact dimensions: ~ 153 × 242 × 16.5 mm.

• 8″ full-HD gesture-driven touchscreen interface.

• Fast start-up (~30 seconds) from standby.

• Battery-powered: ~ 1.5 hours of high-performance scanning, up to ~ 4.5 hours with extended pack.

• Fully cleanable and durable housing for demanding clinical environments.

• Wide probe portfolio: convex/micro-convex, linear, phased-array, endocavitary.

• Automatic image optimization and intelligent measurement tools.

• Secure connectivity: DICOM upload, external monitor via HDMI, wireless display, USB-C, Bluetooth.

• Compatible with mobile, bedside, primary care, sports medicine, and point-of-care applications.

Technical Specifications

• Weight: approx. 1.2 kg

• Size: approx. 153 × 242 × 16.5 mm

• Display: 8″ full-HD touchscreen

• Battery Life: ~ 1.5 hours standard; up to ~ 4.5 hours with extension pack

• Boot Time: ~ 30 seconds to ready state

• Probe Types Supported: convex, micro-convex, linear, phased array, endocavitary

• Connectivity: DICOM, mini-HDMI external display, Miracast wireless display, USB-C, Bluetooth

• Interface: Gesture-driven touchscreen compatible with gloves

• Clinical Use: General imaging, MSK, small parts, primary care, point-of-care, emergency

• Hygiene & Durability: Fully cleanable surface built for frequent disinfection

• Cooperation with the CardioTEST cardiovascular exercise system and AsTER cardiac rehabilitation system,
• Control using a computer through the RS-232 port,
• Braking: a processor-controlled brake with torque measurement,
• Load range: 25 - 1000 W,
• Speed ​​range: 20 - 150 rpm,
• Load independent of the number of turns,
• Built-in ECG module,
• 12 standard leads in diagnostic mode,
• 2 leads in training mode,
• Sensitivity 2,5 / 5/10/20 mm / mV,
• Shift 25/50/100 mm / s,
• Digital filters 25 Hz, 35 Hz, 50 Hz, anti-frit filter,
• Digital filter of the isoelectric line,
• Measuring range HR 15-240 bpm,
• Maximum patient weight 200 kg,
• Power supply: 230 V, 50 Hz, 60VA,
• Dimensions: (LxWxH) 1190x600x1370 mm.

• excellent quality of ECG waveforms thanks to the use of digital filters eliminating the swimming of the isoelectric line and disruption of muscle origin,
• uninterrupted recording and presentation of 12-lead ECG signal,
• presentation of averaged P-QRS-T units with 12 leads along with the results of ST level and slope measurements,
• automatic HR measurement, ST level and ST segment slope,
• automatic control of cycloergometer and treadmill load,
• archiving and printing of the research report,
• automatic determination of measuring points with the possibility of manual correction,
• automatic arrhythmia analysis,
• presentation of parameters regarding: test phase, current load, stage time and total effort time,
• monitored parameters: rhythm rate, MET, double product, blood pressure, level, ST segment slope and load,
• real-time ECG printout,
• preview of trends of all measured parameters during the test,
• alarm system for monitored parameters and arrhythmia,
• an option to automatically measure blood pressure,
• archiving and printing a report enabling a reliable assessment of the study (such an report contains ECG, average P-QRS-T assemblies and a table with measurement results),
• standard test protocols and the ability to define your own protocols also in RAMP mode,
• preview the report on the screen before printing the report,
• function of reanalysis of the performed test,
• presentation of 3D trends illustrating ST segment changes.

Click Here To Download Catalogue 

• 4 way Tabletop Patient Table (PBT-4) A large tabletop with extended travel enables all radiography studies with minimal patient movement, and supporting patient weight up to 300kg. Fully at tabletop without a frame on the edge makes cleanliness and odors free
• Floor Mount Tube Stand (TS-FM6) Floor Rail type tube stand provides all radiography studies with smooth movement on the rail.
• Wall Bucky Stand (WBS) Elegant design, durable and easy-to-use Wall Bucky Stand provides full satisfaction.

• Power Rating - 32KW
• Generator - GXR-32S
• Rotor - Dual Speed Starter(DSS)
• Input Power - 400/480VAC, Three phase
• Line Frequency - 50/60Hz
• X-ray tube - DXT-12M, (0.6/1.2mm, 300kHU)
• Tube Voltage - 40 to 150kV, 1kV Step
• Tube Current – 10 to 640mA
• Output - 640mA@81kV,  500mA@104kV, 400mA@130kV, 320mA@150kV
• Time Range - 1ms to 10s
• mAs Range - 0.1 to 800mAs
• Reproducibility - Coe­cient of Variation : kV < 0.005, Time < 0.005,mAs < 0.01
• Accuracy - kV < ±(1%+1kV), mA < ±(3%+1mA), Time <±(1%+0.5ms), mAs < ±(3%+0.1mAs)
• Linearity - Coe­cient of Linearity < 0.01 : CL = (X1-X2)/(X1+X2), where X is mR/mAs

Click Here To Download Catalogue

• DIAMOND is a fully-automatic diagnostic system with motorized movement and pre-programmed data for automatic positioning that can be easily reprogrammed by the operator.
• Seven safety sensors have been integrated into the DIAMOND system to protect patients from accidental collision.

• Included – Software, HP Laptop Computer

• Power Rating - 52KW
• mA - 10 to 640mA
• mAs - 0.1 to 500mAs
• kV - 40 to 150kV, 1kV Step
• Generator - GXR-52
• Rotor - Dual Speed (High and Low)
• Input Power - 400/480VAC±10%, 3Ø
• Line Frequency - 50/60Hz
• X-ray tube – DXT-12M 0.6/1.2mm, 300kHU

Click Here To Download Catalogue

Click Here To Download Catalogue